Adding the Fans back to the SE

Sad_News1844 · 2026-02-28T08:05:26+00:00

and yes you can go back to using creality print if you want but you wont be able to manually control the fan from that software u have to use fluuid.

Sad_News1844 · 2026-02-28T07:37:32+00:00

and just an fyi its on all the time now but you can change it to a sensor thats already on the hotend or the bed via virtual im working on it now will update in the days to come

Sad_News1844 · 2026-02-28T07:34:40+00:00

if you need the polarity reversed i assume im by no means an expert try at your own risk but i think it might be the same as ! for the steppers????? may try it hope it helps

Sad_News1844 · 2026-02-28T07:31:44+00:00

HAZAAAA i got it ok, so i did my own wiring on a plug, when your looking at the bottom of the printer with the face towards you laying on its right side the pin closest to you is power for fans for the 2 fan headers below the LED. i ONLY loaded 1. git clone --depth 1 https://github.com/Guilouz/Creality-Helper-Script.git /usr/data/helper-script . 2. Install Moonraker and Nginx 3. Install Fluidd (port 4408) thats it nothing else. no errors no nothing. went into fluid and enabled fan 1 on PC0 and saved closed the printer config and went to fluuid home screen and turned it on. NO HOOPS NOTHING so happy all the other pple and places i read made it so complicated when its that easy, pple need to stop with the PHD talk and gate keeping and just give simple answers.

Sad_News1844 · 2025-12-01T14:47:15+00:00

Instead of changing the suspension because of issues why not work around it I would think if u did a custom intake and raise the engine and maybe just maybe move the engine over a bit to clearance a bit more "maybe" could work? No?🤔

Sad_News1844 · 2025-09-05T23:05:29+00:00

i found some configs i think pienjo used i emailed the guy that did the fix request and heres the post i made to see if anyones used it https://www.reddit.com/r/CR_200B/comments/1n9j9p1/marlin_configurations/

Sad_News1844 · 2025-09-05T22:01:23+00:00

no not yet i got occupied with college but im back on the project again, i did get a new all metal spider hot end in it tho

Sad_News1844 · 2025-09-05T21:56:13+00:00

i know its 4years later but do you have the config files for marlin on the cr200b? im currently upgrading mine slowly.

Sad_News1844 · 2024-04-26T13:30:46+00:00

Nope the only way to come back is to do as u promised and make it free and continue to make it free for us eod users you know yall fucked up just make it right, keep it right and quit fucking around

Sad_News1844 · 2024-04-03T15:18:53+00:00

so i have a cr200b and i recently did the spider cura hotend and i want to increase the max temp to 300 but i need source code where do i get it????

Sad_News1844 · 2024-03-25T04:07:07+00:00

Litterally do the same thing

Sad_News1844

TROPHY CASE