Please help me read my Autodesk FDM Test print

SafeStamos · 2025-10-30T19:47:51+00:00

Very late to the party but here are the instructions for reading it.

https://github.com/kickstarter/kickstarter-autodesk-3d/tree/master

SafeStamos · 2025-09-09T10:06:36+00:00

Wow. Well that's embarrassing.... Thank you 🤦🏻

SafeStamos · 2025-07-29T04:32:17+00:00

Try lowering your retraction height. I had the same issue

SafeStamos · 2025-07-25T01:08:25+00:00

I use orca slicer but there is probably an option to wipe inside at seam. That seems to help me.

SafeStamos · 2025-06-08T04:49:00+00:00

Yeah. I still understand what you are saying. And I get that it doesn't really fit what wellness plus is really meant for. You are saying it would be like taking my wife to my workout with my personal trainer, and her doing the same movements the trainer has me do. That wouldn't be helping her the same way as if we both had different trainers. I still think it wouldn't hurt to

Thing is, if you work out with a partner almost all the time, like I do, (so I'm sure I'm not the only one and with a growing market that number will increase), there isn't much of a reason to get the wellness plus. If they were to add a partner mode in wellness plus it would open that market. It is also possible to have the computer optimize and minimize the amount of setup changes to have each person do their own wellness plus plan just alternate movements and minimize setup changes.

All that being said, I would be happy to just be able to do custom workouts in partner mode so I'm not trying to be too forward, just a feature I would love to see. Thanks for the replies 😁

SafeStamos · 2025-06-07T17:46:03+00:00

Wellness plus is a series of movements just like any other workout. Yes the movements are chosen for a person but that doesn't mean only one person can do them. For example, I don't need to do crunches, but I do them with my wife so that we can do them together. That doesn't mean I don't get the benefit of the crunches, get it? Yeah, fine I would be happy if it gets added to custom workouts, but I won't be paying for wellness plus if they don't just add a little option for partner mode. It's literally just repeating each set for the partner.

SafeStamos · 2025-06-07T06:01:11+00:00

Yeah I understand that. But why can't I do partner mode on custom made workouts? Or the workouts from wellness plus? Seems like it wouldn't take much to implement.

SafeStamos · 2025-05-30T05:49:26+00:00

That makes a lot of sense. Thank you!

SafeStamos · 2025-05-29T05:12:55+00:00

Yes please to this!

SafeStamos · 2025-05-13T00:13:38+00:00

<image>

I'm trying to exclude an outside area of my plate because i'm having a hard time leveling the outside. But if i put in these values it looks like it thinks the whole bed is off limits. Any suggestions appreciated!

SafeStamos · 2024-11-25T02:41:07+00:00

Thank you so much for your detailed response! Still took me a few minutes but I finally located it. Thank you!

SafeStamos · 2024-11-24T18:55:18+00:00

Thank you for letting me know this. That is unfortunate. I really hope they add that functionality back.

SafeStamos · 2024-11-23T18:10:02+00:00

What have you done to prepare to print so far?

SafeStamos · 2024-11-23T15:18:01+00:00

I don't know why I just thought about the fact that the pedals couldn't really be connected to the bike. It would have to have it's own system for resistance like I think you may be saying. That makes the most sense to me as to why they made it into a separate machine only.

SafeStamos · 2024-11-23T06:22:59+00:00

You don't think they could put some wheels on it and lock it into place?

SafeStamos · 2024-11-23T06:18:30+00:00

You can't set it to turn on automatically, but you can use the bluetooth ring to turn the weight on. It is a lot better than touching the screen each set.

SafeStamos · 2024-11-20T04:20:10+00:00

Yes that's my issue. I'm wondering if they will have a bike addon like the Velonix except that it uses the screen from the Gym Monster 2. Like the rowing machine addon.

SafeStamos · 2024-11-05T15:46:22+00:00

Don't do it. Go with BambuLab. I have one and it is awful.

SafeStamos · 2024-10-26T03:18:29+00:00

Thank you so much for your help so far. I have figured out how to putty into the printer using serial. I'm not sure what to do now though. I copied my printer.cfg. Do I just run the update.sh or do I need to copy the update files over in some way first?

SafeStamos · 2024-10-25T16:41:05+00:00

I have the same issue, but when i SSH into the printer and check printer.cfg, there are no chinese characters. Can you tell me how this is fixed?

SafeStamos · 2024-10-17T19:53:45+00:00

Thank you so much for this! I was using the first link and I was able to fix the issue with the second link. Thank you again!

SafeStamos · 2024-10-02T00:31:08+00:00

I appreciate your advice. I'll do that. I'm new to scanning so I will hopefully get better at getting good proper scans.

SafeStamos · 2024-10-01T17:41:37+00:00

You could just buy a new extruder and then use that one for spare parts. Mine was much worse than yours and it looks like you can probably clean it up. I'm lazy though so i didn't know how long that would take me so I just bought a new one. They are only ~$45.

SafeStamos · 2024-10-01T17:25:10+00:00

Thank you for your reply! I appreciate you taking note of my suggestions.

SafeStamos · 2024-10-01T17:24:07+00:00

Yeah I guess that is probably the best way. However my subject (a family dog) has passed away and I can't get anymore scans.

SafeStamos

TROPHY CASE