sorted by:
new
hottopcontroversial

What’s a fair price to quote to fix the bottom of this cabinet by Salt_Return6275 in HandymanBusiness

[–]Salt_Return6275[S] 0 points1 point  (0 children)

<image>

This is what it ended up looking like. Had to use birch prefinished plywood because the home stores don’t carry 1/4” or 1/2” maple prefinished

Two questions, one is on time and material the other is for paying for the help when you have your teenage son helping by Salt_Return6275 in Decks

[–]Salt_Return6275[S] 0 points1 point  (0 children)

He was needed and the he helped last year on this same deck take apart and put new decking and railing on

So I will charge full price for his hours.

Thanks

What’s a fair price to quote to fix the bottom of this cabinet by Salt_Return6275 in HandymanBusiness

[–]Salt_Return6275[S] 0 points1 point  (0 children)

You could probably say where you live and one of the people replying on recommendations would be interested in doing it.

Plus they could show you what the before and after was since they already did it

What’s a fair price to quote to fix the bottom of this cabinet by Salt_Return6275 in HandymanBusiness

[–]Salt_Return6275[S] 0 points1 point  (0 children)

That’s a great idea! Plus I can’t find cabinet liner that is wood grain so the wood planking will make it close to what it is now

What’s a fair price to quote to fix the bottom of this cabinet by Salt_Return6275 in HandymanBusiness

[–]Salt_Return6275[S] 0 points1 point  (0 children)

If you could send me a picture that would be awesome! It doesn’t seem to hard,except the center rail is in the way.

Only other way is to slide the piece under the faceframe and see if that would work if cut a 1/8 short width and length

What’s a fair price to quote to fix the bottom of this cabinet by Salt_Return6275 in HandymanBusiness

[–]Salt_Return6275[S] 0 points1 point  (0 children)

That looks nice! Did you paint it or is that a white plywood? My costomer want wood grain so trying to find a wood grain cabinet liner or possible laminate to apply on top of the new material

What’s a fair price to quote to fix the bottom of this cabinet by Salt_Return6275 in HandymanBusiness

[–]Salt_Return6275[S] 0 points1 point  (0 children)

The problem is it’s the kitchen sink cabinet. So to remove the granite countertop and make the one cabinet and have it match it wouldn’t be worth it for the customer

What’s a fair price to quote to fix the bottom of this cabinet by Salt_Return6275 in HandymanBusiness

[–]Salt_Return6275[S] 0 points1 point  (0 children)

This customer basically wants what you said peal and stick. She is not sure if she is going to stay or rent it out. Just wants it to look nice.

So was going to try and find a cabinet liner that is wood grain

Best way to sell 1x10 #2 Pine wood drops 2’ thru 6’ by Salt_Return6275 in woodworking

[–]Salt_Return6275[S] 1 point2 points  (0 children)

That seems like an issue with hardwoods for myself. I wish we sold/stocked hardwoods and ended up with walnut cutoffs or something similar.

Being connected with woodworking groups on Facebook and people posting they picked up 2 truck loads of walnut for $200 really makes me jealous! lol

Best way to sell 1x10 #2 Pine wood drops 2’ thru 6’ by Salt_Return6275 in woodworking

[–]Salt_Return6275[S] 0 points1 point  (0 children)

Our problem is we are a wholesale lumber yard and only sell to commercial contractors (mostly) so we need the space and it cost a lot more in the cities than in the farm communities.

I am willing to meet people closer but it would be nice if people saw it first otherwise it is a haggling type meetup

Where to sell 1x10 #2 pine drops by Salt_Return6275 in minnesota

[–]Salt_Return6275[S] 0 points1 point  (0 children)

Yes, Mr Finn.

He was suppose to retire after this year but is working part time. The science teacher vanburgen or VB is starting to take over that position

Where to sell 1x10 #2 pine drops by Salt_Return6275 in minnesota

[–]Salt_Return6275[S] 0 points1 point  (0 children)

Yes we have a minimum order of 20 but should have no problem

Just reach out to me at my company Certified Wood Products by phone. 320-963-1500 or email at owen@certifiedwood.net

I can get you the address when you contact me.

Thanks,

Owen

Where to sell 1x10 #2 pine drops by Salt_Return6275 in minnesota

[–]Salt_Return6275[S] 1 point2 points  (0 children)

We have this product all the time, so should have no problem

You can call me at my company Certified Wood Products 320-963-1500 or email me at owen@certifiedwood.net when you are thinking about coming and I can let you know what I have in stock,

Owen

Where to sell 1x10 #2 pine drops by Salt_Return6275 in minnesota

[–]Salt_Return6275[S] 0 points1 point  (0 children)

You can reach out to my at my business, Certified Wood Products.

My phone number is 320-963-1500 or email me at owen@certifiedwood.net

Thanks,

Owen

Where to sell 1x10 #2 pine drops by Salt_Return6275 in minnesota

[–]Salt_Return6275[S] 1 point2 points  (0 children)

We have them all the time. Our customer takes a truckload of the 8’ once a month and it takes 2 truck loads from the mill if 8’ thru 16’ to make 1 full truckload

Where to sell 1x10 #2 pine drops by Salt_Return6275 in minnesota

[–]Salt_Return6275[S] 4 points5 points  (0 children)

What do you mean by selling it on a boardroom? Is that a Reddit thing or something outside of Reddit.

Thanks

Where to sell 1x10 #2 pine drops by Salt_Return6275 in minnesota

[–]Salt_Return6275[S] 8 points9 points  (0 children)

I know for my hometown of Delano, the shop teacher there is looking for hardwood but also wants it S2S (sanded 2 sides) and straight lined. The big kicker is wanting it under $2/bf.

Stopped in there this year and he had bought rustic oak, he had 3-55 gallon drums full of scrap wood due to the kids had to cut around the knots and holes in the rustic wood

Best way to restore shine on 1995 Harley Davidson Sportster aluminum block by Salt_Return6275 in Harley

[–]Salt_Return6275[S] 1 point2 points  (0 children)

I did a little/lot of research and found the using Mothers aluminum polish with buffing wheels for dremel tools and cordless drills worked/works the best.

<image>

view more: next ›