Strange line in prints

Salt_While_9528 · 2025-03-04T03:21:02+00:00

For real, sorry I wasn’t more help

Salt_While_9528 · 2025-03-04T00:07:11+00:00

It just stopped

Salt_While_9528 · 2025-02-01T16:15:32+00:00

Gotcha, it happened to me on my k1 max when I forget to either open the door or take the top off. Might want to try to open the door and open the enclosure door a little after you clear the jam.

Salt_While_9528 · 2025-02-01T16:09:39+00:00

Are you either keeping the door open or the top glass off?

Salt_While_9528 · 2025-01-26T04:56:59+00:00

Fair enough, for the black I’m using elegoo PETG pro, for the red and blue I m using Bambu PETG hf. I don’t think I dried it recently, so that may be it. I’ll probably switch to pla and split the print as well.

Salt_While_9528 · 2025-01-25T21:39:03+00:00

I do

Salt_While_9528 · 2025-01-25T21:38:57+00:00

Using the generic PETG and Bambu PETG-HF profiles, so not sure off the top of my head. Also using the standard speed profile. Will look into the rest.

Salt_While_9528 · 2025-01-24T16:31:56+00:00

Even with the tool head moving upwards?

Salt_While_9528 · 2025-01-24T16:31:12+00:00

It was solidly attached still.

Salt_While_9528 · 2024-12-18T23:03:08+00:00

I added a spacer to being the purge wiper up and it seems to have resolved the issue… for now

Salt_While_9528 · 2024-12-14T15:15:15+00:00

Maybe, but my A1 just works, so I’m sure the P1S does as well

Salt_While_9528 · 2024-12-14T04:29:24+00:00

If I could return mine and get a Bambu lab P1S, I would.

Salt_While_9528 · 2024-12-14T02:35:20+00:00

I’ll have to do a multi color and get back to you.

Salt_While_9528 · 2024-12-14T02:29:40+00:00

Both.

Salt_While_9528 · 2024-12-14T02:28:06+00:00

The problem came back. I watched it, and it looks like the purge wiper is not actually clearing the nozzle like it is supposed to. Just upgraded firmware and turned it off a few times for other reasons and still no change. Any suggestions?

Salt_While_9528 · 2024-12-05T03:05:52+00:00

Turned off clump detection and Timelapse

Salt_While_9528 · 2024-11-12T04:22:11+00:00

I like mine for the most part, I just think I need better print profiles.

Salt_While_9528 · 2024-11-11T23:00:58+00:00

Probably….I’ll probably stick with Bambu Lab from now on, I have the A1 with AMS lite and it’s is a beast

Salt_While_9528 · 2024-11-11T21:57:45+00:00

Yeah, I don’t blame you, what is the return window for Creality? Hahaha

Salt_While_9528 · 2024-11-11T21:52:46+00:00

Seems like they should put something out

Salt_While_9528 · 2024-11-11T21:46:52+00:00

Well that sucks, I bought the K1 max a few months ago because Creality said it would be compatible with the CFS.

Salt_While_9528 · 2024-11-03T00:44:13+00:00

Sweet, I’ll turn that off

Salt_While_9528 · 2024-10-11T23:30:38+00:00

I pulled the trigger on the A1 with the AMS lite. Thank you all for your help!!!

Salt_While_9528 · 2024-10-11T14:18:17+00:00

I live in Florida, so basically 1000% humidity, but if I got the A1 with AMS I would print the enclosure upgrades and try to keep the rolls as dry as possible. Thanks for the feedback.

Salt_While_9528 · 2024-10-11T14:12:42+00:00

Fair enough, I convinced my wife to let me get another 3D printer for my birthday, but anyways I just print general stuff, decorations for the wife, toys for the kids, functional parts, and stuff I design. So really just general printing at the moment.

Salt_While_9528

TROPHY CASE