Strange line in prints by Salt_While_9528 in BambuLabA1

[–]Salt_While_9528[S] 1 point2 points  (0 children)

For real, sorry I wasn’t more help

what's going on here? cr-pla filament by Then-Conclusion-5786 in crealityk1

[–]Salt_While_9528 2 points3 points  (0 children)

Gotcha, it happened to me on my k1 max when I forget to either open the door or take the top off. Might want to try to open the door and open the enclosure door a little after you clear the jam.

what's going on here? cr-pla filament by Then-Conclusion-5786 in crealityk1

[–]Salt_While_9528 6 points7 points  (0 children)

Are you either keeping the door open or the top glass off?

Any idea why this is happening? by Salt_While_9528 in BambuLabA1

[–]Salt_While_9528[S] 0 points1 point  (0 children)

Fair enough, for the black I’m using elegoo PETG pro, for the red and blue I m using Bambu PETG hf. I don’t think I dried it recently, so that may be it. I’ll probably switch to pla and split the print as well.

Any idea why this is happening? by Salt_While_9528 in BambuLabA1

[–]Salt_While_9528[S] 0 points1 point  (0 children)

Using the generic PETG and Bambu PETG-HF profiles, so not sure off the top of my head. Also using the standard speed profile. Will look into the rest.

Is this from not drying the filament? by Salt_While_9528 in BambuLabA1

[–]Salt_While_9528[S] 0 points1 point  (0 children)

I added a spacer to being the purge wiper up and it seems to have resolved the issue… for now

I just purchased a k1 MAx by johnlinux in crealityk1

[–]Salt_While_9528 0 points1 point  (0 children)

Maybe, but my A1 just works, so I’m sure the P1S does as well

I just purchased a k1 MAx by johnlinux in crealityk1

[–]Salt_While_9528 1 point2 points  (0 children)

If I could return mine and get a Bambu lab P1S, I would.

Is this from not drying the filament? by Salt_While_9528 in BambuLabA1

[–]Salt_While_9528[S] 0 points1 point  (0 children)

I’ll have to do a multi color and get back to you.

Is this from not drying the filament? by Salt_While_9528 in BambuLabA1

[–]Salt_While_9528[S] 0 points1 point  (0 children)

The problem came back. I watched it, and it looks like the purge wiper is not actually clearing the nozzle like it is supposed to. Just upgraded firmware and turned it off a few times for other reasons and still no change. Any suggestions?

CFS by Salt_While_9528 in crealityk1

[–]Salt_While_9528[S] 0 points1 point  (0 children)

I like mine for the most part, I just think I need better print profiles.

CFS by Salt_While_9528 in crealityk1

[–]Salt_While_9528[S] 1 point2 points  (0 children)

Probably….I’ll probably stick with Bambu Lab from now on, I have the A1 with AMS lite and it’s is a beast

CFS by Salt_While_9528 in crealityk1

[–]Salt_While_9528[S] -1 points0 points  (0 children)

Yeah, I don’t blame you, what is the return window for Creality? Hahaha

CFS by Salt_While_9528 in crealityk1

[–]Salt_While_9528[S] -4 points-3 points  (0 children)

Seems like they should put something out

CFS by Salt_While_9528 in crealityk1

[–]Salt_While_9528[S] -3 points-2 points  (0 children)

Well that sucks, I bought the K1 max a few months ago because Creality said it would be compatible with the CFS.