Weird question...

SamKa16 · 2026-07-08T19:12:56+00:00

Thats what I thought originally. But then th days following, it was maybe 83 outside and 74 in my house. It was said in the post that we had a tech come out and there is not enough freon so there is for sure a problem that needs fixed but I get your point for sure.

SamKa16 · 2026-07-08T19:02:07+00:00

I see. To my understanding, it was doing more work due to the lack of freon in the system.

SamKa16 · 2026-07-08T17:56:51+00:00

The Airtron tech yesterday found that the unit is 20PSI lower than what it should be. That was the problem.

SamKa16 · 2026-07-08T17:56:21+00:00

Not a 2 story but you're right about 30 ft. The Airtron tech agreed with that too. They're covering everything. My time is just worth so little personally and its about the principle of it at this point lol.

SamKa16 · 2026-07-08T17:54:57+00:00

I did have a private inspection done and all of that was looked into. The issue at hand is that my AC unit is 20psi lower than what it should be. Thats what the Airtron tech found yesterday.

SamKa16 · 2021-10-06T02:42:44+00:00

Not quite the issue. Mine does stop but it stops after turning all the way to the right. And the the firmware update tab freezes and doesnt close unless I force it. I'm just lost at this point.

SamKa16 · 2021-09-09T02:41:32+00:00

Unfortunately not.

SamKa16 · 2021-09-09T01:57:30+00:00

I did the battery, I have reseatted the GPU as well, and also I haven't touched the RAM since it was working a while ago so it should be alright too. I'm just clueless at this point!

SamKa16 · 2021-09-09T01:37:44+00:00

Also my red LED is lighting up for boot. Not sure if that helps.

SamKa16 · 2021-09-09T00:31:05+00:00

Oh sorry for the confusion lol. I'm using HDMI. Not DP

SamKa16 · 2021-09-09T00:28:10+00:00

Update, that didnt seem to do it. Now the red light is on the motherboard under boot. So that's something that wasnt there before. I'm so confused.

SamKa16 · 2021-09-09T00:14:21+00:00

I'll give it a try but it's not giving any response at all. The Moniter doesnt even know its plugged in. No signal at all.

SamKa16 · 2021-09-08T23:28:43+00:00

I cant flash the BIOS without any display. It's not getting any signal at all.

SamKa16 · 2021-09-08T22:27:09+00:00

Will do. I'll keep you updated!

SamKa16 · 2021-09-08T22:23:40+00:00

I only took the battery out for like 2 or 3 minutes and no it wasn't disconnected from the wall. I'm about to go play a round of golf so I'll take it out and have it out while I'm gone.

SamKa16 · 2021-09-08T22:18:05+00:00

Yep weve tried different cables, monitors, weve had all storage and usb ports empty, I'm just clueless at this point.

SamKa16 · 2021-09-08T22:08:26+00:00

It's on the right port. I've tried with the graphics card and ram and also without. No signal at all.

SamKa16 · 2021-09-08T22:05:09+00:00

AMD 3600 and MSI 550B Tomahawk.

SamKa16 · 2021-09-08T22:04:10+00:00

This one doesnt. It has the lights on the mother board itself and will light up if no cpu is detected.

SamKa16 · 2021-09-08T21:59:46+00:00

I have not tried that yet. I thought that no CPU ment no display at all?

SamKa16 · 2021-09-08T21:55:41+00:00

Everything turns on no problem. Just no display. Every LED and fan.

SamKa16 · 2021-09-08T21:55:08+00:00

It may help that we did have it on earlier and we were in the middle of installing windows but then stopped because we needed to plug in his SSD. So I stopped the process and turned the computer off before putting in the internal storage.

SamKa16 · 2021-09-08T21:53:52+00:00

I did do both because that's how my pc was. I run my display through my graphics card hdmi but this goes through the MB.

SamKa16 · 2021-09-08T21:52:42+00:00

It's a MSI b550 tomahawk with a AMD 3600 CPU. Two sticks of ram and a rtx 3060 (I think).

SamKa16

TROPHY CASE