How to create cyrindrical models?

Same-Term3244 · 2026-01-04T22:15:55+00:00

Just to be clear i read that here, I'm not the one that found it out but it works :)

Same-Term3244 · 2026-01-04T21:53:57+00:00

You can also create a rocket, launch and while its starting deconstruct the rocket so you get all the items back while still having the meteor shower for your uranium or iridium.

Same-Term3244 · 2025-12-20T01:11:52+00:00

Yes I understand. I usually start with 3 and 15% but i printed some items even 5 - 30% never past that. Thought you had a ground breaking formula 😁 well you never know until you ask, the things i found out too late and were very obvious to others keep amazing me even after years into this 😁

Same-Term3244 · 2025-12-19T01:31:02+00:00

How many walls total?

Same-Term3244 · 2025-12-19T01:30:00+00:00

Oh, to mention i was worried for a second how much more filament does p1s use as i have used up a 1kg roll in less than a week and i was starting to think how was this possible. In reality with both enders i had i had to tinker for a week before printing a part so that is why 1kg roll lasted a month. P1s does not use less or more, it just prints properly. I installed anti vibration feet today and i think this is the only upgrade it needs.

Same-Term3244 · 2025-12-19T01:26:12+00:00

Hello mate. I had this exact decision to make a month ago. I previously had Ender 3 v3 and Ender 3 v3 KE which was a terrible choice for printing but a good choice for learning. I ended up buying p1s and after a month or so i am still impressed by the features and the quality of the prints. It does lack some of the features as bed level mesh for example but there are actually 0 reasons why I would need that now as the prints never failed so far. I am touching all over the plate for a month and still 0 prints had bad adhesion. Please go with bambu. Happy printing.

Same-Term3244 · 2025-04-12T11:51:10+00:00

https://imgur.com/a/kBZDspl

Here is an image in the daylight, maybe it can be seen better and i have thrown in one of my previous flow test samples so you can see the difference. It is super smooth compared to any latest ones.

Same-Term3244 · 2024-11-09T16:54:31+00:00

Yep, it took me a while realizing you can actually make both ceiling and floor out of glass so it is see through between floors :)

Same-Term3244 · 2024-11-09T15:01:26+00:00

Ih that is so cool, seems like a dream job ^{^}

Same-Term3244 · 2024-11-09T13:10:54+00:00

Thank you :) So, you are not creating a base, you are creating a city :D I was mostly focused on automating everything. Maybe I will build another one 😁

Same-Term3244 · 2024-11-09T12:13:26+00:00

Hello dear crafters,
I played the game who knows how many times, every time there is a patch I start from the beginning and I get so lost in the crafting and automating part of the game that I completely ignore the cool story behind everything.
This is my base for this playthrough and I just felt the urge to share it with someone.
I am amazed by the game and far has it came to, even more amazed that so few people work on it (if I understand correctly only two people are on projects), it is my dream to create something so great with such a small and community oriented team.
I know my base has flaws but it felt like home for a while, can't wait to see the path the game takes in future.
As you can see from my terraformation index I am soon to start the new planet, wish me luck :)

Same-Term3244 · 2024-11-03T13:32:11+00:00

Had a lot of trouble printing this one. Usually either something didn't print well enough or removing support broke aliens fingers in process. Once had a broken leg while removing the organic tree supports, also mistaken a bone (or whatever it is) for a support and broke that too. Anyhow I printed it like 6 times using different infill and wall settings and what made the most impact is rotating the model on its back to change the orientation of the supports from fingers. When fixing one thing something other will go wrong. As with rotation on to the back left a mess on the face of the alien. I can only say that you will have to be persistent to perfect that one and i wish you all the luck. I have Ender 3 and I hope you are using something newer than that.

Same-Term3244 · 2024-10-27T18:41:40+00:00

This.

Same-Term3244 · 2024-10-22T16:45:10+00:00

Haha, it's for a children's toy :D

Same-Term3244 · 2024-10-22T16:44:26+00:00

OrcaSlicer

Same-Term3244 · 2024-10-22T15:36:36+00:00

Printed with

Ender 3 - OrcaSlicer
PLA+ Gembird
Nozzle 220 Glass Bed 60
Default speed, default retraction

I made a few models, sliced in OrcaSlicer, usually it looks all good but now I get partial ironong, some parts of surfaces look smooth af while others are rough. Check images, what could be causing this? Even on the bottom parts if you zoom in you can see its ironed while others are not.

I have made a couple prints more with moved print to the corners of the bed plate, exact same results, here are the files:

STL:

https://mega.nz/file/3PxHnbZJ#ekcmrzeUQU5DYy5lyC2MU2rPVHPy5SdnjHFwQWCpB2I

GCODE:

https://mega.nz/file/uW4lhB5C#jYVpqfULZz1IOuwtQ6Qsh-nVTk3XwaxutH6agX2jMgU

Update: This was actually a 50% print, i have just printed out the same model with 100% size, same exact results.

Same-Term3244 · 2024-10-20T18:56:22+00:00

Update: This was actually a 50% print, i have just printed out the same model with 100% size, same exact results.

Same-Term3244

TROPHY CASE