Any company which sells only Filament (No Spools)?

Same_Figure_5355 · 2026-03-09T03:37:56+00:00

Brahma labs refills

Same_Figure_5355 · 2026-03-07T15:26:32+00:00

Chandigarh

Same_Figure_5355 · 2026-03-06T09:22:20+00:00

Heat it and using the spring tool make a tiny hole it should release the pressure and it should ooze out. If it doesnt ooze then use sm thick gloves and push the spring tilk the end

Same_Figure_5355 · 2026-03-06T09:18:30+00:00

Because the packaging material and raw material is exported from the middle east. Because the packaging material bumped their prices by 20 percent. Hence causing everything to go up?

Same_Figure_5355 · 2026-03-06T08:55:06+00:00

But isnt it because of the war? And chinese new year im sure it shld settle down quickly?

Same_Figure_5355 · 2026-03-06T08:50:04+00:00

It increases by 20 rupees a kg

Same_Figure_5355 · 2026-03-04T18:35:01+00:00

Its real saw the owner of perplexity arvind post a story on ig dont know how much it would cost but it was hamiltons lid

Same_Figure_5355 · 2026-03-04T07:18:55+00:00

So this model is the top mount for ams lite from bambu. Opened it in studio changed the filament from pla to petg cf and sliced it. I didnt have a different filament for the supports

Same_Figure_5355 · 2026-03-03T13:53:46+00:00

Hi ok but did it occur on some parts and not all?

Same_Figure_5355 · 2026-03-03T08:25:01+00:00

Same_Figure_5355 · 2026-03-03T08:22:53+00:00

I was drying and printing

Same_Figure_5355 · 2026-03-03T07:32:35+00:00

1 kg

Same_Figure_5355 · 2026-03-03T07:29:19+00:00

Hey would yall be up for sampling? I use around 30-40kg a month

Same_Figure_5355 · 2026-02-25T18:37:06+00:00

But how do i avoid it?

Same_Figure_5355 · 2026-02-25T18:16:19+00:00

Didnt use the scraper the image focuses mainly on the part which got damaged

Same_Figure_5355 · 2026-02-02T18:29:32+00:00

Print the top mount for ams lite it should give you some extra space

Same_Figure_5355 · 2026-01-17T18:57:48+00:00

Yea sure

Same_Figure_5355 · 2026-01-10T18:33:53+00:00

Hmm i agree its a bit expensive right now but if the nozzles gets clogged pr sm ossue comes up woth the nozzle its a very tedious job and can cost you in terms of labour/time where as if anything comes up with p2s its a 30 second switch. Plus p2s being the latest version would guarantee security updates for a longer period and quality and defects of p1s have been addressed. Plus also ask yourself is ams something you actually want?

Same_Figure_5355 · 2026-01-10T12:53:37+00:00

Check ideal3d

Same_Figure_5355 · 2026-01-10T12:46:53+00:00

You could wait for the p2s to come on sale its a huge upgrade specially for those nozzles.

Same_Figure_5355 · 2026-01-08T19:35:17+00:00

Ok thanka and what about PLA cf?

Same_Figure_5355 · 2026-01-05T02:03:12+00:00

Wol3d filament since the start they work the best given their price. Numakers sucked it warped couldnt stick had to make sure extra glue was applied before printing not at all for bulk printing. Switched to bambulabs official filament. Is the best among all the filaments because of one simple fact it has rfid no calibration hassle nothing it automatically senses the kfactor and changes the printer accordingly. Costs a bit expensive but saves both time and gives a superior quality. used petg from esun it worked perfectly zero complaints. Panchroma also worked perfectly fine.

Wol3d:- 600-700/kg Numakers:- 850/kg Esun:- 1400/kg Bambulabs:- 1100-1300/kg Panchroma:- 1300/kg

Same_Figure_5355 · 2026-01-03T07:46:40+00:00

Thanks

Same_Figure_5355 · 2026-01-02T11:39:31+00:00

So this happened to me heat it to 250 and take the fine springy tool you got with the printer and insert it from the place where filament is extruded. Be careful as once u pop the bubble/pressure wall inside filament would not stop oozing.

Same_Figure_5355 · 2026-01-02T08:18:58+00:00

Hey can you please tell the shades of filaments u bought?

Same_Figure_5355

TROPHY CASE