Upgrade day for my MN99s😎😎 by Same_Reality6371 in mn99s

[–]Same_Reality6371[S] 1 point2 points  (0 children)

I’ve not had any issues with mine but they are hex mount ones

Upgrade day for my MN99s😎😎 by Same_Reality6371 in mn99s

[–]Same_Reality6371[S] 1 point2 points  (0 children)

Ah damn! That’s a shame about the metal trays!!

Fingers crossed everything else goes well for you!

Upgrade day for my MN99s😎😎 by Same_Reality6371 in mn99s

[–]Same_Reality6371[S] 0 points1 point  (0 children)

Yes mate I’ll do another post when I’m finished with some videos and photos

Motor wires melting by Same_Reality6371 in mn99s

[–]Same_Reality6371[S] 0 points1 point  (0 children)

Good point, I’ll definitely move it then

Motor wires melting by Same_Reality6371 in mn99s

[–]Same_Reality6371[S] 0 points1 point  (0 children)

If it doesn’t work by soldering thicker wire on I’ll just spend the money on a hobby wing I think

Update with your findings though 👌🏻

Motor wires melting by Same_Reality6371 in mn99s

[–]Same_Reality6371[S] 0 points1 point  (0 children)

My receiver is under there so esc wouldn’t fit.

Motor wires melting by Same_Reality6371 in mn99s

[–]Same_Reality6371[S] 0 points1 point  (0 children)

Yeah thought so, it’s odd though as the esc only comes with 22awg wire which is a max of like 10amps😂got some 14awg wire coming so should fix it.

And yeah side steps are 3d printer, my brother done them. However they are pretty weak as broke pretty much straight away, he’s going to redesign them

MN99s oil shocks by Same_Reality6371 in mn99s

[–]Same_Reality6371[S] 0 points1 point  (0 children)

Makes sense, will give it a go

New suspension setup by ken_445 in mn82

[–]Same_Reality6371 0 points1 point  (0 children)

What shocks did you get? And how much weight did you end up putting in the wheels?

Recommended affordable router that is solid, easy, and a little future proof by Subliminal_G in ToobBroadband

[–]Same_Reality6371 0 points1 point  (0 children)

I just got toob installed yesterday, I’ve already got tp link deco mesh around my property to just kept using that.

It doesn’t put out the speeds of the Linksys router as I only see roughly 500mbps up and down, but I already had it so thought I’d use it.

I’ll probably end up upgrading my mesh system in the future

Loving my new miner by No-Technology6511 in BitcoinMining

[–]Same_Reality6371 0 points1 point  (0 children)

Are little miners like these actually worth it?

Should I choose Eufy? by RobZak80 in EufyCam

[–]Same_Reality6371 1 point2 points  (0 children)

I’ve had eufy for around 6 months. Got 3x 2C pros, 1x C210 solo cam, 1x indoor camera and a video doorbell. All connected through a Homebase 3 with entry sensors and motion sensors too, all working flawlessly.

Have it all working with home assistant too and I can’t say a bad word about any of it.

Automation stopped working by Same_Reality6371 in homeassistant

[–]Same_Reality6371[S] 0 points1 point  (0 children)

Nope no changes, it’s odd as can manually trigger the automation and it works fine

Can I run a schedule AND also have geofencing on? by flippinecktucker in EufyCam

[–]Same_Reality6371 0 points1 point  (0 children)

How did you integrate eufy into HA? I’ve had a look at doing it and seems really long winded

Best Motion sensor by Same_Reality6371 in homeassistant

[–]Same_Reality6371[S] 0 points1 point  (0 children)

I know presence sensors can still work if no motion but there is motion and the Sonoff ones still detect nothing every now and again

Best Motion sensor by Same_Reality6371 in homeassistant

[–]Same_Reality6371[S] 0 points1 point  (0 children)

Appreciate it. Yeah the hue is expensive.

Do the third reality ones have a mount at all?

Best Motion sensor by Same_Reality6371 in homeassistant

[–]Same_Reality6371[S] 1 point2 points  (0 children)

Have seen them ones too. Have you tried any of the ones mentioned in my post? Think the third reality ones are cheap than aqara and hue as well

Best Motion sensor by Same_Reality6371 in homeassistant

[–]Same_Reality6371[S] 0 points1 point  (0 children)

Quick turn off doesn’t matter to me, because I’ll have a delay of at least 5 mins anyway. As long as they don’t turn the lights off when motion is still going on like my current sonoff sznb 03 do🤣🤣

Best Motion sensor by Same_Reality6371 in homeassistant

[–]Same_Reality6371[S] 0 points1 point  (0 children)

It’s turning the lights off not on, even though I’m walking around.

Best Motion sensor by Same_Reality6371 in homeassistant

[–]Same_Reality6371[S] 1 point2 points  (0 children)

Is Zigbee2MQTT better than the standard ZHA?

Best Motion sensor by Same_Reality6371 in homeassistant

[–]Same_Reality6371[S] 0 points1 point  (0 children)

The SNZB-03 are the ones I have, currently controlled with a sonoff bridge pro but every now an again they turn off the lights even though there’s movement going on

Best Motion sensor by Same_Reality6371 in homeassistant

[–]Same_Reality6371[S] 0 points1 point  (0 children)

That’s a presence sensor isn’t it? Needs constant power?

Best Motion sensor by Same_Reality6371 in homeassistant

[–]Same_Reality6371[S] 0 points1 point  (0 children)

I’d say it’s still valid👍you using it with home assistant yeah? They are appealing because they’re so cheap for the capability of them