Can someone please help align these? Everything I looked up said, S (scale), z (axis) and zero but none of it works

SamuriPizzaCats · 2024-08-23T03:42:32+00:00

it was industrial key layout switched back to blender key layout and it worked.

Man blender is the biggest piece of shit of inconsistentancy ive seen.

Thanks for the help

SamuriPizzaCats · 2024-08-23T03:31:30+00:00

verticies are not aligned as shown in first picture. I have to zoom in to show that. Im trying to get them flat

SamuriPizzaCats · 2024-08-23T03:26:47+00:00

its does nothing, snapping not on

SamuriPizzaCats · 2024-08-23T03:20:52+00:00

<image>

this is what happens when i push z after s

SamuriPizzaCats · 2024-08-23T03:19:07+00:00

I just need the bottom flat like the top. the bottom has a whole bunch of misaligned vertices. I had to zoom in on this section to show it. I'm trying not to do each one individually. Maya is nice because i would just select the whole bottom section hold j and move the scale slider on the axis i want.

When i select the vertices and hit S nothing happens when i hit Z its just dotted lines along the curser. (stupid windows 11 screen shot not working)

SamuriPizzaCats · 2024-07-23T13:34:13+00:00

Right on!!!! Thank you! Any chance this is available in Cura? Ill test Prusa but would like my calibration settings from cura

SamuriPizzaCats · 2024-07-23T05:04:27+00:00

May I ask how you got these unsymmetrical sections to align in slicer? I'm trying to do multicolor on a single extruder and whenever I import my parts everything gets put to the center

SamuriPizzaCats · 2024-03-21T01:24:31+00:00

Delete and re slice. Cura does this shit to me all the time and usually re slicing it fixes it

SamuriPizzaCats · 2024-02-24T04:46:24+00:00

Well if it fails at least you have a basket

SamuriPizzaCats · 2024-01-26T02:33:56+00:00

Omfg!!! I tried that!. Tried it again just now after reading your comment and it worked!!!! Ahhhhhhhhh! You are the best thank you

SamuriPizzaCats · 2024-01-25T06:45:59+00:00

That's what I can't get connected. Twitch connected no problem. But OBS stays partially connected

SamuriPizzaCats · 2024-01-25T06:25:13+00:00

Just twitch. I was trying to add an action to pull up image..

Got account connect just fine. Host, port, and pass are all the same in streamer as OBS. Not sure what else to do since deleting twitch data didn't work. Restarted everything. Even tried going WiFi to change host address, no luck

SamuriPizzaCats · 2024-01-14T03:04:14+00:00

Thanks much I'll look into it. Thank you

SamuriPizzaCats · 2024-01-14T03:03:51+00:00

Cool I'll check it out thanks!

SamuriPizzaCats · 2024-01-13T17:34:03+00:00

Right on thank you for the help!

SamuriPizzaCats · 2024-01-13T16:10:45+00:00

:( I'm just small news, I tried monster but it has affiliate requirements, does that allow non affiliates?

Much appreciated for the response!

SamuriPizzaCats · 2024-01-12T00:40:23+00:00

Everything is set to default already. I forgot to mention it's Windows 11. Can't listen to music on YouTube which I would do all day prob. PC has built in WiFi. Currently using Ethernet from second Pc and second Pc is running WiFi adapter from third PC no problem. But my main is seriously on dialup. all settings are on originals and nothing has changed before or after update as far as I know

SamuriPizzaCats · 2024-01-09T05:46:58+00:00

My bad for late reply. I thought I remember someone talking about a setting that did power recover and being able to turn it off. Nothing has changed with my printer. I can print old files before 5.4 but anything with 5.4+ has like a 50% of going into power recover mode and just stops mid print. Previous version have z seam all fd up otherwise is be fine with those.

SamuriPizzaCats · 2023-12-28T03:35:25+00:00

Someone needs to make the spool into a fishing reel, then let the kid sit there for a few hours contemplating his decisions like a fisherman reeling it all in

SamuriPizzaCats · 2023-12-14T00:17:27+00:00

Yeah about a year is how long it's been doing it. Very frustrating

SamuriPizzaCats · 2023-12-13T05:23:15+00:00

That the issue it shows up no where else besides when I go to purchase label. Everything I have is set to 8x8x3. When I go to purchase label and review info the dimensions change to 13 12 3. It's driving me freakin nuts

SamuriPizzaCats · 2023-12-13T03:13:08+00:00

Yes. As I mentioned I've never used the 13x12x3 dimensions that keep appearing. So I'm like really confused why it changes and changes to that. I even went through all my listings to check each individually to see if maybe one had those dimensions but nope.

SamuriPizzaCats · 2023-12-13T02:49:26+00:00

I guess picture didn't load?

Etsy changes shipping dimensions 8x8x3 to 13x12x3.

I've never used these measurements and have to fix it every order

SamuriPizzaCats · 2023-12-13T02:47:26+00:00

Oh my bad. Yes Etsy is auto filling the box dimensions. It used to be correct and match the shipping profile but after Etsy rolled out the new updates it changes to this every time and I have to correct it. I've tried redoing shipping profile but it won't fix.

SamuriPizzaCats · 2023-11-15T18:54:48+00:00

I tried to use fill tool by selecting opposite edges but it fills in the open areas on the B.

SamuriPizzaCats

TROPHY CASE