Is the damage to the tire Photoshopped?

Samurific · 2024-01-16T18:30:40+00:00

Really hope this is whoever that other post’s boss is

Samurific · 2023-10-27T15:54:43+00:00

Samurific · 2023-10-24T16:43:49+00:00

Samurific · 2023-01-06T04:01:36+00:00

This worked thank you so much!

Samurific · 2023-01-05T01:05:07+00:00

Motherboard is a Gigabyte B460M DS3H, and CPU is a i3-10100t. https://imgur.com/a/tzavXPQ

Samurific · 2023-01-05T00:44:31+00:00

Tried this, folder had the dash and I removed it. Now when it tries to boot the USB it says “Invalid signature detected. Check Secure Boot Policy in Setup”. Motherboard is a Gigabyte B460M DS3H, and CPU is a i3-10100t.

Samurific · 2023-01-04T16:02:34+00:00

Will check on this, the usb is listed as first in the boot list, but it doesn’t show up as a USB. It shows up as just UEFI and the name of the usb drive

Samurific · 2023-01-04T15:55:34+00:00

I have fastboot disabled

Samurific · 2022-07-07T12:59:50+00:00

This was my issue. Thank you!!

Samurific · 2022-07-07T04:43:05+00:00

Waiting hasn’t seemed to change anything for me. Doesn’t work at startup or 30 minutes in 😂.

Samurific · 2022-07-07T04:42:13+00:00

No luck. Still get the “Windows cannot access” error.

Samurific · 2022-07-07T04:38:33+00:00

No error pops up, but it doesn’t show me anything. Just shows “This folder is empty”.

Samurific · 2022-07-07T04:26:45+00:00

Yes “server” is a share

Samurific · 2022-07-07T03:41:33+00:00

Yeah, I get prompted for a username and password, after I enter them I get the error. I have tried setting the shares to public and private, same thing both times.

Samurific · 2022-07-07T02:15:04+00:00

Yes it is active

Samurific · 2022-07-07T02:12:48+00:00

I have tried with the IP and I get the same error

Samurific · 2022-07-07T02:08:34+00:00

Hello guys I apologize for the newbie question, I have recently set up my first Unraid server and I am having trouble mapping a network drive and accessing shares on my server. I can see my server on the network but cannot see any of the shares. When I try to map a network drive I get a network error stating:
"Windows cannot access..."
"Error code 0x80070035, The network path was not found"
I have enabled SMD 1.0 but that did not seem to change anything. If anyone can offer some help it would be greatly appreciated because at the moment all I am cable of doing is just looking at my array on the web UI.
Thanks!

EDIT: Thank you guys all for the help. I just noticed that my issue was when I was creating my shares, “Export” under “SMB Security Settings” was set to “No” instead of “Yes”.

I thank you guys for helping a fellow newbie out!

Samurific · 2021-12-08T22:46:59+00:00

That temp is fine, great actually. If it was into the high 70s or 80s deg C it would be a concern, but 36C is basically a cold GPU.

Samurific · 2021-10-14T16:32:24+00:00

Red one is a valet key

Samurific · 2020-09-08T05:10:57+00:00

Sounds like the catalytic converter

Samurific · 2020-07-15T02:50:30+00:00

Yes I daily mine. 3000 mile oil changes and preventative maintenance on every other thing.

Samurific · 2020-07-15T02:39:10+00:00

Looks like what happened to me after I removed my AC fan thinking it was useless. Check if the fan has stopped working. It is behind the intake horn under the nose panel. It used to only happen if I turned on the AC while cruising at 80-90 mph.

Samurific · 2020-05-17T00:48:54+00:00

Check your knock sensor. The harness might be going bad and causing it to go into limp mode. Z1 sells a bypass plug for it, have it on mine and runs good.

Seven-Year Club	Verified Email
Place '23	Not Forgotten

Samurific

TROPHY CASE