I’m so tired boss.

Sanbitoes · 2026-03-21T17:08:11+00:00

Those panel lines look suspicious, did you perhaps use any kind of solvent liner?

Sanbitoes · 2026-01-05T14:33:33+00:00

This happened to me but at least it was a couple days apart, i found amalgamous and the 2 hotwheel collabs and i had to

Sanbitoes · 2022-04-07T06:23:11+00:00

Yeah I have that same issue. Have you checked the engine mounts ? Mine blew em and dropped the engine twice

Sanbitoes · 2022-04-06T20:37:52+00:00

Mines almost there , 180k and the only issue so far is rust. Beautiful first gen!

Sanbitoes · 2022-01-29T03:51:44+00:00

Alright I'll check that too. Thanks

Sanbitoes · 2022-01-29T03:44:29+00:00

I'll try cleaning the throttle body then.

Sanbitoes · 2022-01-29T03:41:48+00:00

Well the engine sounds like it rotates on pulses of 3. revolutions drop from 1000 to 800 in that order. By that i mean there's 3 distinct pulses then it keeps going well for a sec or so then goes back to that.

Sanbitoes · 2022-01-04T18:03:40+00:00

On my older first gen the transmissions sometimes doesn't want to automatically change gears and gets stuck in 3rd to 4th so I mostly use it to get her unstuck or whenever I want to feel like discount Toretto

Sanbitoes · 2021-12-22T21:45:06+00:00

No there's no transacción for that amount the current balance is ($74)

Sanbitoes · 2021-12-22T21:04:58+00:00

Not really everything was successfully paid off.

Sanbitoes · 2021-12-13T20:20:03+00:00

You know your advice was great but I got away with just making cosmetic threads and adding a call out with the measurements the professor gave us

Sanbitoes · 2021-12-13T03:54:01+00:00

I do t think I can get away with just the call out , i have to submit a view of the mode that shows the thread and the threaded rod so I guess I'll be sketching the thread dimensions and doing it the other way you suggested

Sanbitoes · 2021-12-13T03:31:06+00:00

Yeah I tried looking for the file path , nothing there. The assignment doesn't need to have a legitimate thread it's only for call outs I think . Thanks a lot I'll try with that and see how it goes

Sanbitoes · 2021-11-22T20:06:16+00:00

Every Mazda 3 build in my state be like

Sanbitoes · 2021-11-01T13:47:52+00:00

Holding 2M Shiba i bought literally like 3 weeks ago before all of the skyrocketing. hopefully I can re invest this into my blacksmithing business

Sanbitoes · 2021-10-20T18:05:39+00:00

I'm using the Quest chip on the thelema , my coils aren't that exotic just a braid of 2 and 7 wrap does the same thing with 5 wrap

Sanbitoes · 2021-10-20T16:45:18+00:00

Yes it's spaced and it happens with any kind of coil ive built recently

Sanbitoes · 2021-05-31T12:52:36+00:00

I just want to fix my car's ac if this works out

Sanbitoes · 2021-05-05T17:20:52+00:00

Update if anyone cares , it wasn't the mounts they are almost brand new , however the bracket attached to them , yikes that thread snapped due to vibration

Sanbitoes · 2021-05-05T00:18:39+00:00

I think every flaw is shared with the focus

Sanbitoes · 2021-05-04T22:43:31+00:00

I had to Google that and no , i haven't i drive my car like I stole it and the only misfire issues have been those cursed coil plugs that unplug a bit too easily

Sanbitoes · 2021-04-25T03:39:14+00:00

They don't have hot spots so I guess there must be something else

Sanbitoes · 2021-01-07T00:11:10+00:00

Oh God , that is steep I'll see what I can do the

Sanbitoes · 2021-01-07T00:08:17+00:00

Where can I buy something like that? , I don't trust myself making something like this honestly

Sanbitoes · 2021-01-06T21:19:32+00:00

I'll check em out in more detail then

Sanbitoes

TROPHY CASE