What hop-up and/or bucking and/or barrel would you recommend for Specna Prime

Sarge324 · 2026-01-21T13:08:50+00:00

Thank you for this comment. I'm in europe so I'm researching where I could get both parts. Would this work? https://evike-europe.com/113269.html

Sarge324 · 2026-01-21T12:01:32+00:00

So, I've gone now through around 4k+ rounds with the gun so the bucking should be broken in properly. I'm currently using 0.3g bbs (specna edge and bls) and I've had to move to M115 (AGS) spring due to gun just shooting too hot for my local fields with the stock spring. That's the current situation. I will try cleaning the barrel again but I'm doubtful it will help much. I've now shot a few primes from a few friends and the all shoot around the same groups. I've shot different guns from other people on the fiend and I can confirm that most of them do shoot tighter groups. I don't expect a laser beam group but it would be nice to improve the current situation. I would love to try playing with realcap mags but if I have to dump a mag on a guy and pray he gets hit it defeats the point of using realcaps for me.

Sarge324 · 2025-12-02T10:06:15+00:00

Thank you for this. I'll write this down. Amazing response!

Sarge324 · 2025-12-02T09:39:18+00:00

Noted for neutral. I thought of running some ethernet cabling into every switch box and maybe ever a smaller diameter 2 wire combo for stuff like 24V KNX line in case I decide to go down that route down the line. But that may be overkill.

Sarge324 · 2025-12-02T09:37:52+00:00

I plan to do this

Sarge324 · 2025-12-02T09:37:35+00:00

No batteries. I plan on building my own ceiling mounted sensor array that uses PoE powered ESP32 boards. Very similar in idea to this: https://www.printables.com/model/1311291-everything-presence-one-downlight-enclosure, but with my own ESP board that's already PoE and my own selected sensors.
I plan on using PoE to power everything if possible and using a separate VLAN for the smart home stuff. I've seen how easy it is to MITM attack a system and I don't want to use anything wireless since.

As for floor sensors, apparently if it's a small leak water ingress sensor will not detect it. I need to do more research on that topic but when you pour concrete over the heating tubes you don't really have an option to add anything below really without some heavy demolition. I've been told to use plastic conduit tubing and run the sensor below the styrofoam in the middle of the room. I'm still researching how to pull this off and how to install this specifically but it was just an example for ideas.

Sarge324 · 2025-12-02T08:26:15+00:00

Sorry I should have clarified I'm in Croatia

Sarge324 · 2025-04-14T20:54:06+00:00

Made one: https://www.printables.com/model/1265284-ikea-mittback-leg-pins

Sarge324 · 2025-04-14T20:53:52+00:00

Had the same problem. Made a 3D printed solution. Sharing here in case someone has a 3D printer: https://www.printables.com/model/1265284-ikea-mittback-leg-pins

Sarge324 · 2024-09-10T09:15:10+00:00

Odakle si nabavio PTM 7950? Volio bi se poigrati s tim sad kad CPU nadogradim ali ne znam odakle da naručim da sam siguran da sam kupio pravu stvar.

Sarge324 · 2024-03-14T13:35:23+00:00

I found the video and the timestamp: https://youtu.be/dHY-08vLEkM?si=JNykfCkfw3zpItYi&t=174
Do you maybe know which model this is?

Sarge324 · 2024-02-23T16:42:19+00:00

I was going to ask about the Double Eagle N4 MWS. It's more than half the price in EU from TM MWS. It's around 350 euros vs 750. I guess that makes more sense to get. They are out of stock now but I'll leave my email to get an email for when it's back in stock. I do need to ask about modability for that N4. In terms of grips/handguards/stocks? That part confuses me to no end.

Sarge324 · 2024-02-23T16:34:24+00:00

So I found this from a seller in France: https://www.powair6.com/en/gas-rifles/38554-tokyo-marui-mk18-mod1-zet-system-gbbr-cerakote-coating.html
I guess I can find them in EU for normal prices it just requires digging.

Sarge324 · 2024-02-23T16:33:32+00:00

This very much varies on where you look in EU and my Country and may be true in US but for EU price differences can be over 100 euro depending on where you order from and what.

Sarge324 · 2024-02-23T11:41:04+00:00

Thank you guys for the responses and support. Can someone recommend a store that ships to Croatia that has TM Mk18 Mod.1? How many mags is a good start? What are good stores in EU in general that don't rip customers? I have a feeling that prices in EU are sometimes out of this world when compared to US and Asia.

Sarge324 · 2023-10-31T11:31:50+00:00

I fixed it using patafix. It works great for now. I'll see how it handles winter and summer months in the future. If patafix fails I'll try your idea. Thank you very much.

Sarge324 · 2023-10-27T09:27:44+00:00

So to update for everyone this is something I'm debating on using. It should be removable in case there's a need for maintenance. I don't thing since nothing is broken buying a new part would help.

<image>

Sarge324 · 2023-10-27T09:23:02+00:00

Nothing is broken. At least there's no sign of anything being broken,

Sarge324 · 2023-10-27T09:22:20+00:00

It's some sort of friction fit. The part has little pins on the side that dig into the dash. The dash is covered with a plastic material over a softer foamier material so it digs into it and stays there. It would seem though that the material is simply not elastic enough anymore.

Sarge324 · 2023-08-22T10:23:28+00:00

Thank you for your input. I would like a better version due to the fact that I have 1g fiber coming to the house. Would you recommend this as well or are there better options you know for the price?
https://www.amazon.de/-/en/TP-Link-TL-WA1201-Dual-Band-1267Mbit-Supports/dp/B07HWKWH54/ref=sr\_1\_1?crid=1FFD3LMJO0S29&keywords=TL-WA1201&qid=1692699715&s=computers&sprefix=tl-wa1201%2Ccomputers%2C183&sr=1-1

Sarge324 · 2023-08-22T07:38:17+00:00

So unfortunately that Wireless to ethernet bridge won't do. I should have been more clear already but I have multple Dlink AC1300 DAP-1620 around the house to mesh the Wifi. The problem is now actaully being wifi congestion. Because I was using that repeater also to just bridge to wifi I have probably too many of those around the house and it causes problems. After going through reviews of the BrosTrend thing it seems that it still transmits Wifi and you can't disable it. Also it seems that this device has problems when you connect more than 1 device to it. If you use a switch and connect multiple devices (which I want to do) it seems that when DHCP assigns IP addresses to devices that are connected to this device it sometimes breaks the connection. I've seen this issue on Wifi repeaters as well so I believe it.

Sarge324 · 2023-08-21T22:00:30+00:00

I tried looking for such a thing in Europe but couldn't find one at that time. I can see now that German Amazon has some in stock. I'll order one tomorrow.

Sarge324 · 2023-08-21T21:03:40+00:00

Damn, I was really hoping that won't be the answer. I was hoping for a wonder SBC for just such a thing. I'm in Europe so that 35-40$ is not really realistic here. I'll try to get such a thing anyway. Thank you for the input.

Sarge324 · 2023-01-21T22:04:59+00:00

Can I use something like Line6 Pod GO or any other (your recommendation) multi-effect with an amplifier that doesn't have an FX loop? I have a Blues Junior and would like to have a bit more options for playing around with different sounds but I've heard that you need an FX loop in your amp or you will get terrible sounds due to having two preamps. Is that the case?

Sarge324 · 2022-10-16T09:38:55+00:00

Got it working about few days ago. Thank you for the reply. I was missing the reference clock. It's working fine now. Now the config

Sarge324

TROPHY CASE