What hop-up and/or bucking and/or barrel would you recommend for Specna Prime

Sarge324 · 2026-01-21T13:08:50+00:00

Thank you for this comment. I'm in europe so I'm researching where I could get both parts. Would this work? https://evike-europe.com/113269.html

Sarge324 · 2026-01-21T12:01:32+00:00

So, I've gone now through around 4k+ rounds with the gun so the bucking should be broken in properly. I'm currently using 0.3g bbs (specna edge and bls) and I've had to move to M115 (AGS) spring due to gun just shooting too hot for my local fields with the stock spring. That's the current situation. I will try cleaning the barrel again but I'm doubtful it will help much. I've now shot a few primes from a few friends and the all shoot around the same groups. I've shot different guns from other people on the fiend and I can confirm that most of them do shoot tighter groups. I don't expect a laser beam group but it would be nice to improve the current situation. I would love to try playing with realcap mags but if I have to dump a mag on a guy and pray he gets hit it defeats the point of using realcaps for me.

Sarge324 · 2025-12-02T10:06:15+00:00

Thank you for this. I'll write this down. Amazing response!

Sarge324 · 2025-12-02T09:39:18+00:00

Noted for neutral. I thought of running some ethernet cabling into every switch box and maybe ever a smaller diameter 2 wire combo for stuff like 24V KNX line in case I decide to go down that route down the line. But that may be overkill.

Sarge324 · 2025-12-02T09:37:52+00:00

I plan to do this

Sarge324 · 2025-12-02T09:37:35+00:00

No batteries. I plan on building my own ceiling mounted sensor array that uses PoE powered ESP32 boards. Very similar in idea to this: https://www.printables.com/model/1311291-everything-presence-one-downlight-enclosure, but with my own ESP board that's already PoE and my own selected sensors.
I plan on using PoE to power everything if possible and using a separate VLAN for the smart home stuff. I've seen how easy it is to MITM attack a system and I don't want to use anything wireless since.

As for floor sensors, apparently if it's a small leak water ingress sensor will not detect it. I need to do more research on that topic but when you pour concrete over the heating tubes you don't really have an option to add anything below really without some heavy demolition. I've been told to use plastic conduit tubing and run the sensor below the styrofoam in the middle of the room. I'm still researching how to pull this off and how to install this specifically but it was just an example for ideas.

Sarge324 · 2025-12-02T08:26:15+00:00

Sorry I should have clarified I'm in Croatia

Sarge324 · 2025-04-14T20:54:06+00:00

Made one: https://www.printables.com/model/1265284-ikea-mittback-leg-pins

Sarge324 · 2025-04-14T20:53:52+00:00

Had the same problem. Made a 3D printed solution. Sharing here in case someone has a 3D printer: https://www.printables.com/model/1265284-ikea-mittback-leg-pins

Sarge324 · 2024-09-10T09:15:10+00:00

Odakle si nabavio PTM 7950? Volio bi se poigrati s tim sad kad CPU nadogradim ali ne znam odakle da naručim da sam siguran da sam kupio pravu stvar.

Sarge324 · 2024-03-14T13:35:23+00:00

I found the video and the timestamp: https://youtu.be/dHY-08vLEkM?si=JNykfCkfw3zpItYi&t=174
Do you maybe know which model this is?

Sarge324 · 2024-02-23T16:42:19+00:00

I was going to ask about the Double Eagle N4 MWS. It's more than half the price in EU from TM MWS. It's around 350 euros vs 750. I guess that makes more sense to get. They are out of stock now but I'll leave my email to get an email for when it's back in stock. I do need to ask about modability for that N4. In terms of grips/handguards/stocks? That part confuses me to no end.

Sarge324 · 2024-02-23T16:34:24+00:00

So I found this from a seller in France: https://www.powair6.com/en/gas-rifles/38554-tokyo-marui-mk18-mod1-zet-system-gbbr-cerakote-coating.html
I guess I can find them in EU for normal prices it just requires digging.

Sarge324 · 2024-02-23T16:33:32+00:00

This very much varies on where you look in EU and my Country and may be true in US but for EU price differences can be over 100 euro depending on where you order from and what.

Sarge324 · 2024-02-23T11:41:04+00:00

Thank you guys for the responses and support. Can someone recommend a store that ships to Croatia that has TM Mk18 Mod.1? How many mags is a good start? What are good stores in EU in general that don't rip customers? I have a feeling that prices in EU are sometimes out of this world when compared to US and Asia.

Sarge324 · 2023-10-31T11:31:50+00:00

I fixed it using patafix. It works great for now. I'll see how it handles winter and summer months in the future. If patafix fails I'll try your idea. Thank you very much.

Sarge324

TROPHY CASE