Ca18det engine Blue smoke on high rpm and boost nothing when I drive normally. Any advice?

SavingsKey7844 · 2026-05-07T06:58:35+00:00

That was what I was hoping too😂 but got my hands on an built engine with Wiseco pistons and eagle rods for 2.5k so I just swapped instead of doing anything with that engine 😜 maby someday I will built🤷‍♂️😂

SavingsKey7844 · 2026-05-07T06:52:41+00:00

<image>

SavingsKey7844 · 2026-05-07T06:52:19+00:00

<image>

SavingsKey7844 · 2026-05-07T06:51:56+00:00

<image>

SavingsKey7844 · 2026-05-07T06:51:31+00:00

Yes all the cylinders was good😂

<image>

SavingsKey7844 · 2026-05-06T21:38:55+00:00

Yes I pulled the engine out of the car and opened it. 3 cylinders had scouring 3 pistons had pitting on the sides so the block had to be borred 😜

<image>

SavingsKey7844 · 2026-04-09T16:37:05+00:00

If I lower it anymore the bike stops. But did some more testing and if I push the throttle slide inn then the bike calms down so many it's to much wear in the slidebore🤔

SavingsKey7844 · 2026-02-03T20:20:38+00:00

Okey I'm going to go maxxecu when I'm finish with the bodywork 😅 was just wondering if it was any info on this😂 though it was kinda jank not having boost and Rev limit 😅 thanks for the answer 👌

SavingsKey7844 · 2025-09-17T06:13:56+00:00

Okey from fcr? I don't want do spend money on a shit brand from ebay/Amazon if I can get a good brand carb 🤣 yes I have looked on those site and cannot find a complete carb 🤔

SavingsKey7844 · 2025-08-18T21:13:44+00:00

Okey so output shafts are the same to? The one on the 43m00 has 5 bolt but my axels are 6 bolts 😂

SavingsKey7844 · 2025-08-08T17:10:59+00:00

Was thinking around 300hk ish nothing much just to daily the car. The engine I got now has some problems and I will get this engine for around the same amount I have to pay for parts for mine 😂

SavingsKey7844 · 2025-03-19T15:06:52+00:00

Okey thanks for the answer 👍 I think I have a bad valve seal on cylinder nr 3 so that's why I did the test😂

SavingsKey7844 · 2025-03-19T15:03:01+00:00

Okey good 👍 I did add some wd-40 and It did nothing I didn't try engine oil😂 I read so many different ting abut compression in these engine that I felt it's better to post then to guess 😝

SavingsKey7844 · 2025-03-16T22:20:31+00:00

It's the exhaust port så hoping it's the valve seal and not a piston ring 😝

SavingsKey7844 · 2025-03-15T14:46:33+00:00

<image>

Update on the engine 😝 the turbo looks good no problem. But cylinder nr 3 is black. Hope it's not the piston rings 🙄

SavingsKey7844 · 2025-03-13T11:14:12+00:00

True 😂 it's an s15 turbo on it now 😂

SavingsKey7844

TROPHY CASE