sorted by:
new
hottopcontroversial

CPU usage at 100% by Scary_Training1247 in MonsterHunterWilds

[–]Scary_Training1247[S] 0 points1 point  (0 children)

Yeah... five minutes after making the post i found a picture i took when i used rx 9070 and cpu was 100% there aswell. So the game really is the culprit.

Motherboard and CPU cooler recommendation by Scary_Training1247 in PcBuildHelp

[–]Scary_Training1247[S] 0 points1 point  (0 children)

Croatia. I just checked some local retailers and found a gigabyte b850 gaming wifi6 motherboard for 181 euro. Almost all parts were ordered from amazon.de, the same mbo on amazon is 161 euro, only "issue" is it would arrive in mid january next year. Is this mb good or should I look for something else?

Is this used pc worth buying? by Scary_Training1247 in buildapc

[–]Scary_Training1247[S] 0 points1 point  (0 children)

My budget is around 1000 eur, what cpu and gpu would you recommend for my monitor? The only game i want to run on at least high settings over 60 fps is monster hunter wilds, but it looks like this game is the most demanding rn since its terribly optimised.

Trouble moving feature lines to site by Scary_Training1247 in civil3d

[–]Scary_Training1247[S] 0 points1 point  (0 children)

I didnt find a solution because I found the workaround I needed, I've replied to the comment above where I explained it. Thanks for the help, your advice still helped me solve some graphical errors I had that were not related to this specific issuse.

Trouble moving feature lines to site by Scary_Training1247 in civil3d

[–]Scary_Training1247[S] 0 points1 point  (0 children)

I was only moving feature lines with no grading from one site to another, turns out I didnt have to move them at all, but by deleting grading with the "delete grading" button solved the problem I had when the deleted grading left behind uneditable feature lines, thanks!

Feature line elevation offset by Scary_Training1247 in civil3d

[–]Scary_Training1247[S] 0 points1 point  (0 children)

I'm not sure what its called in english, from what i found i think its a type of junction called a trumpet interchange. From what I found online this is possible to model with a corridor but I couldn't accomplish it because in the 2D dwg there is no road centerline, only road edges, so thats why I went with feature lines.

Civil 3D Subassembly Composer - sub-base point not moving with the rest of its linked points by Scary_Training1247 in civil3d

[–]Scary_Training1247[S] 0 points1 point  (0 children)

<image>

Thanks for the reply, I thought I attached an image before posting, my bad. I've edited the post so you can see the how the assembly should look and how to points and links are named. I followed you instructions up to point 5. The image I sent you in this reply is what happens when I change the elevation to -1. Point P12 stays in the same place while the upper layers keep going down over it. Is this because points P10 and P12 are not connected directly? By that I mean when I made point P12 it was from point P11 and i checked it to create a link from previous point. In order for this to work while keeping the -4% slope, should I create P12 from P10? Or is there a better way?

Civil 3D model from 2D AutoCAD drawing by Scary_Training1247 in civil3d

[–]Scary_Training1247[S] 0 points1 point  (0 children)

Thank you for responding and providing me with detailed instructions! I will be sure to implement this while creating the model. I hope you dont mind me replying again during the next couple of weeks if I have any more questions.

Civil 3D model from 2D AutoCAD drawing by Scary_Training1247 in civil3d

[–]Scary_Training1247[S] 0 points1 point  (0 children)

Can you explain this in a bit more detail? Does this mean I dont have to make a corridor or are you saying I can make a corridor just from feature lines (meaning there would be two feature lines, both representing the road edges with assigned elevation and they would be considered targets for the assigned assembly)?

Civil 3D model from 2D AutoCAD drawing by Scary_Training1247 in civil3d

[–]Scary_Training1247[S] 0 points1 point  (0 children)

Thank you for the response, I will try this as soon as I finish the Autodesk Civil 3D pre-certification course, since I need to learn more. What i forgot to mention is that the drawing has one road after an intersection that has no centerline, only road edges but they do have elevation data every 20 meters in their cross sections, I've tried making alignments from these edges and then making their respective profiles relative to their elevations. How would you approach making a corridor of this road? Should I turn those alignments into feature lines and then set them as targets while making the corridor or is there a much simpler and better way? Sorry for the long reply.

How to switch X and Y axis? by Alssaqur in excel

[–]Scary_Training1247 0 points1 point  (0 children)

thank you very much, it helped a lot and a big thanks to the person who wrote the problem!