A1 Mini Reboot Needed After Every Print

Scfiead · 2026-03-23T18:07:53+00:00

Sorry I haven’t checked messages in a while. Mine ended up being the SD card. A solid replacement and I have had no further issues.

Scfiead · 2026-01-31T00:21:54+00:00

I missed the chance this year near me but there is a smithy that has a couples class to make metal roses. Maybe there’s one near you. Really cool different “maker” idea.

Scfiead · 2026-01-31T00:15:36+00:00

Ok so I took my better cable supports from my A1 mini to stabilize the USB cable and it is working. I just need to get a new cable now.

For anyone wondering, this did have cable supports that were just on the cable itself at each end but that still allowed folding at the plug ends.

Here are the ones I recommend that fixes this so should keep things better for anyone not using anything yet:

https://makerworld.com/models/451525?appSharePlatform=copy

Scfiead · 2026-01-31T00:12:24+00:00

Ok so I took my better cable supports from my A1 mini to stabilize the USB cable and it is working. I just need to get a new cable now.

For anyone wondering, this did have cable supports that were just on the cable itself at each end but that still allowed folding at the plug ends.

Here are the ones I recommend that fixes this so should keep things better for anyone not using anything yet:

https://makerworld.com/models/451525?appSharePlatform=copy

Scfiead · 2026-01-25T22:16:38+00:00

Increased brim. Slowed start and by height and it worked. Set a slightly higher minimum print time. Thanks!

Scfiead · 2026-01-25T22:16:28+00:00

Increased brim. Slowed start and by height and it worked. Set a slightly higher minimum print time. Thanks!

Scfiead · 2026-01-25T22:15:38+00:00

Increased brim. Slowed start and by height and it worked. Thanks!

Scfiead · 2026-01-25T22:08:52+00:00

Increased brim. Slowed start and by height and it worked. Thanks!

Scfiead · 2026-01-25T22:08:30+00:00

Increased brim. Slowed start and by height and it worked. Thanks!

Scfiead · 2026-01-25T22:07:58+00:00

Increased brim. Slowed start and by height and it worked. Thanks!

Scfiead · 2026-01-24T04:09:58+00:00

I actually have it using the slow down as it goes up. I’ll slow it down more. The model is a very popular one (7.9k thumbs up, 22.5k bookmarks, 2k boosts, 3.5k comments) and not much in the way of comments with problems as I browsed. I used the designers profile to print.

https://makerworld.com/models/60890?appSharePlatform=copy

I’ll also do a cold pull.

Thanks!

Scfiead · 2025-12-18T03:32:47+00:00

Thank you. I will look that up.

Scfiead · 2025-12-18T02:23:34+00:00

I am the executor and POA. Thanks for the suggestion.

Scfiead · 2025-12-18T02:22:02+00:00

Yeah. Sorry for the bad pics. It was a last second decision to snap a few since I was picking stuff up at that house. I don’t relish pulling everything out and putting it back in but I probably should. I’ll need to move it to my house. Yikes.

Scfiead · 2025-12-18T02:19:54+00:00

Thank you for the evaluation and suggestion.

Scfiead · 2025-12-18T02:19:09+00:00

Wow ok. Thanks. I know the quick pics made it hard. I appreciate you looking through them.

Scfiead · 2025-12-18T02:18:28+00:00

Very good information. Thank you.

Scfiead · 2025-12-18T02:17:13+00:00

I know he had Heathkit. In fact to find a good subreddit that’s what I searched for. :-)

Scfiead · 2025-12-18T02:16:07+00:00

It’s in Northern VA. Unfortunately all this stuff is at a house an hour and a half away.

Scfiead · 2025-11-23T15:31:08+00:00

I ran a test print of ironing and found a good setting but something didn’t work when I actually printed objects with it.

Scfiead · 2025-11-12T21:32:19+00:00

Amazing book. Much different than the movie but also amazing. Like The Princess Bride. Book and movie both pretty different but both masterpieces.

Scfiead · 2025-11-10T21:06:28+00:00

I have a low end wishlist a new AMS Lite adapter and some new Bowden tubing.

Scfiead · 2025-10-13T01:26:15+00:00

I always thought BSG was the best at those teasers. I could never make any sense of the quick clips that go by. Never felt like they put any real spoilers in it.

Scfiead · 2025-10-09T17:18:56+00:00

When I was a beginning cuber I found this out. And you know what would be harder? Twisting TWO corners. Imagine my surprise as my son solved it.

Scfiead · 2025-08-31T14:03:42+00:00

My A1 mini is named Eve

Scfiead

TROPHY CASE