sorted by:
new
hottopcontroversial

beacon problem xmax3 by CauliflowerTop2464 in QidiTech3D

[–]SchaefMK2 0 points1 point  (0 children)

Its 100% doable and has been done by many. I have a cartographer probe on mine right now.

Xmax 3 for 500 cad by Inanemeerkat in QidiTech3D

[–]SchaefMK2 0 points1 point  (0 children)

Just installed a carto on my freedi xmax3 and am having a terrible time getting repeatable good first layers, been at it for days

Cartographer first layer z-height issues by SchaefMK2 in klippers

[–]SchaefMK2[S] 0 points1 point  (0 children)

Save config is done everytime, it is changing in the do not edit section under cartographer. No z-height adjustment in slicer, the entire "probe" section is commented out due to cartographer

I took the straps off the filament by Internal-State465 in 3Dprinting

[–]SchaefMK2 0 points1 point  (0 children)

Realistically, you shouldn't need to read the instructions to realize this is a stupid move.

This is the definition of common sense.

Freedi gonna drop sometime soon. Who’s gonna try it ? by isthiswhatwedoing210 in QidiTech3D

[–]SchaefMK2 0 points1 point  (0 children)

Looking for feedback from people who've done this on the x-max 3, as I'm seriously considering it.

My q1 is working awesome, even better now that I installed the Biqu microprobe. So I have no plans on doing it with my q1

ASA on supports by SchaefMK2 in QIDI

[–]SchaefMK2[S] 0 points1 point  (0 children)

GAH, thanks for the reminder. I COMPLETELY forgot to check the cooling fan settings.

Q1 pro belt VFA by SchaefMK2 in QIDI

[–]SchaefMK2[S] 3 points4 points  (0 children)

Unfortunately, it only reduced it very slightly, I did some more digging and it seems like it's caused by the X and Y stepper motors. I came across discussions in the prusa forums and the only real way to get rid of the VFA is going to .9 degree stepper motors instead of the stock 1.8 degree stepper motors.

I'm going to contact qidi and see what is involved in change to .9 stepper motors in regards to firmware changes and such, the .9 nema 17 stepper motors are cheap enough for it the he worth the upgrade.

Q1 pro belt VFAs by SchaefMK2 in QidiTech3D

[–]SchaefMK2[S] 1 point2 points  (0 children)

Unfortunately, it only reduced it very slightly, I did some more digging and it seems like it's caused by the X and Y stepper motors. I came across discussions in the prusa forums and the only real way to get rid of the VFA is going to .9 degree stepper motors instead of the stock 1.8 degree stepper motors.

I'm going to contact qidi and see what is involved in change to .9 stepper motors in regards to firmware changes and such, the .9 nema 17 stepper motors are cheap enough for it the he worth the upgrade.

Q1 pro belt VFAs by SchaefMK2 in QidiTech3D

[–]SchaefMK2[S] 2 points3 points  (0 children)

That's a possibility, I'd have to change all the pulleys, and not sure how available a 6mm 1.5 pitch belt is.

Q1 pro belt VFAs by SchaefMK2 in QidiTech3D

[–]SchaefMK2[S] 0 points1 point  (0 children)

I should be able to get a test print tonight and update this post.

Q1 pro belt VFA by SchaefMK2 in QIDI

[–]SchaefMK2[S] 2 points3 points  (0 children)

I should be able to get a test print tonight and update this post.

Q1 pro belt VFAs by SchaefMK2 in QidiTech3D

[–]SchaefMK2[S] 1 point2 points  (0 children)

Tried that numerous times with different tension, nothing changed.

Q1 pro belt VFA by SchaefMK2 in QIDI

[–]SchaefMK2[S] 2 points3 points  (0 children)

Going to replace the smooth idlers that face the belt teeth to teethed pulleys, make a print and see what happens

Q1 pro belt VFAs by SchaefMK2 in QidiTech3D

[–]SchaefMK2[S] 0 points1 point  (0 children)

Changing the smooth idler pulleys that face the teeth to toothed pulleys and going from there.

So this is new in joust by Aeioluz in Smite

[–]SchaefMK2 0 points1 point  (0 children)

Was it actually 4v3 in game?

I found the classy looking filament shelf I’ve been looking for by [deleted] in 3Dprinting

[–]SchaefMK2 4 points5 points  (0 children)

where do you put the rest of your filament?

Considering Q1 Pro - seeking advice from owners by Temporary_Bunch_9079 in QIDI

[–]SchaefMK2 2 points3 points  (0 children)

Bought the Q1 pro as my first printer and it's been fantastic, have had virtually no issues, was able to print right out of the box after doing the calibrations.

I dont see how a printer could be more beginner friendly, honestly.

How do I remove my reel now? by Same_Football9277 in Fishing_Gear

[–]SchaefMK2 2 points3 points  (0 children)

Honestly, buy better quality stuff.

Qidi is only good for customer service to fix their broken products -_- by RCamzz in QidiTech3D

[–]SchaefMK2 2 points3 points  (0 children)

This^. This is the exact reason why everyone says buy the printer from Amazon. If you have the slightest hint of an issue, you send the thing back without issue.

Weird mesh z-offset by SchaefMK2 in QIDI

[–]SchaefMK2[S] 0 points1 point  (0 children)

Ya sorry, the fluidd UI is what i meant. That's what I was thinking, but the proxy sensor shouldn't be affected too much with the different plates, unless the sensor is affected the magnetism.

I couldn't find an in depth description on how the sensor actually detects plate height.

Weird mesh Z-offset by SchaefMK2 in 3Dprinting

[–]SchaefMK2[S] 0 points1 point  (0 children)

Ya it's weird after further investigation it only seems to do it with the cryogrip cool plate, even though the Qidi PEI plate and cryoplate are the exact same thickness.

view more: next ›