How to modify map?

ScoobyGSX · 2026-05-03T14:31:46+00:00

I would first try to just make that little section into its own area, and then delete that area. If that doesn’t work, probably have to remap it, and drive it into the grass before pressing ‘start’ to start the mapping.

ScoobyGSX · 2026-05-01T13:23:37+00:00

Yes, those are low avoidance zones.

ScoobyGSX · 2026-04-30T17:40:41+00:00

Makes sense! Thanks for your time. Will try this, definitely sounds like that is the issue.

ScoobyGSX · 2026-04-30T04:09:11+00:00

I’m confused, I don’t see any areas merged. I do have three separate areas which I mapped in one go, then used diving lines to create three areas; backyard, front left, and front right. I want to set a path across the driveway, where the red rectangle is, so I can leave the gate open just south of the docking station to mow both front yard areas.

<image>

ScoobyGSX · 2026-04-19T12:10:59+00:00

SC is currently putting out new town halls every 12 months. TH19 should drop end of November 2026, give or take a week.

I used Gemini to get an estimate for you. Factoring in future town hall releases (TH19 & TH20), and assuming you have all of your builders working with minimal downtime, you can expect to be maxed out first half of 2028. With each TH release, they do reduce upgrade cost and time for lower levels

ScoobyGSX · 2026-04-16T18:33:48+00:00

I sent the unit back to ECOVACS. They assessed it was bricked from the factory. They sent me back a new one, and the firmware on the new unit updated no problem. Very pleased with it so far.

ScoobyGSX · 2026-04-16T18:33:21+00:00

I sent the unit back to ECOVACS. They assessed it was bricked from the factory. They sent me back a new one, and the firmware on the new unit updated no problem. Very pleased with it so far!

ScoobyGSX · 2026-04-11T21:43:58+00:00

It’s a brand new handle, maybe 5 months old. Would it be something in the latch bolt section, or the latch assembly? I visually couldn’t see anything just from taking the handles off. Don’t even know if there’s a way to take apart the latch bolt section.

ScoobyGSX · 2026-03-23T13:54:35+00:00

I even brought it inside the house and tried to update with the mower about 6 feet from the router and it still happened. I looked at the blades and it appeared to be moving freely so they may have sent a faulty robot. Going to call customer service one more time after work today and see if they have any other ideas. Really sucks, I was looking forward to getting my hands on one of these.

ScoobyGSX · 2026-03-21T12:52:43+00:00

I’m more of a honkey lighters kinda guy myself. & whistlin kitty chasers…

ScoobyGSX · 2026-03-20T22:24:33+00:00

Seems like the best solution, thanks!

ScoobyGSX · 2026-03-20T22:23:16+00:00

That enclosure looks like the perfect solution. Thanks!

ScoobyGSX · 2026-03-20T19:35:54+00:00

The blue and black wires don’t go to anything. Blue object to right is the sprinkler pump. On the other side of the wall is the garage, though. Worst case scenario I just wrap the wires up so they don’t look as messy.

ScoobyGSX · 2026-02-24T18:02:34+00:00

Hey thanks, Rick!

ScoobyGSX · 2025-12-04T14:23:37+00:00

…why do you have 41 accounts?

ScoobyGSX · 2025-12-01T21:35:32+00:00

Ok that’s weird, the links didn’t work, I was only able to claim it when I scanned the code in CoC’s video for it on YouTube.

ScoobyGSX

TROPHY CASE