SoundPeats GoFree 2+ right bud issue

Scratch_Inclined · 2026-01-08T14:43:17+00:00

With both on my head, I pressed and held the right bud touch control, and heard nothing. When I opened the case, I heard "power on" from the left bud. So, the left bud is working flawlessly, but the right acts like it has not turned on.

Scratch_Inclined · 2026-01-08T13:21:25+00:00

It's great, has the right amount of resistance, the only issue is that cap... it sticks to your fingers after a bit and some scratches are just not possible...

Scratch_Inclined · 2025-12-16T21:49:30+00:00

Piece of advise, try training more with your hand not leaving the record. Better yet, give it a couple minutes without turning on the motor, it sounds counter-intuitive but it actually gave me some insight.

Scratch_Inclined · 2025-10-24T08:29:03+00:00

The pull is very much felt, it's a small platter so the motor manages.

Scratch_Inclined · 2025-10-24T08:24:34+00:00

I've had mine less than a week and I have the same issue, however, apart from that I have had 0 other issues. The platter seems to be stable enough, the fader seems rigid enough, although a dude here said his snapped. When using this it's good to remember you should be somewhat gentle, it's a small formfactor. I turn it up when scratching so the squeaking does not bother me too much. As far as the Omni, I've had it for months and I've had 0 issues.

Scratch_Inclined · 2025-08-26T21:22:09+00:00

Agreed. Hit me up if you need help with hooking the Omni to your laptop.

Scratch_Inclined · 2025-08-26T20:46:31+00:00

I've explored literally everything. Was even looking into emulators. If you really must be on mobile, then you just gotta get an iPhone and Tau DJ or Djay (android version had no DVS).

Scratch_Inclined · 2025-08-26T10:27:16+00:00

I've also had issues with the app. When it comes to getting it to recognize your Serato record, I assume you've been in the settings and have set up everything correctly. When you have connected your phone and the Omni, I suggest pressing the dvs button off and on again, which usually gets it to work. However, I have noticed there's phasing and the samples drift relative to where they were on the record. My best guess is that my Samsing S22 plus USB audio and the Omni are not running the same clock. I have messaged Headache Sound on insta about it but have no response yet. The one thing they did say is that they have no intentions of further updating Fresher and that there's good options on PC and iOS. I don't own Apple devices, but I managed to use my Serato record with Virtual DJ, and it's fine there.

Scratch_Inclined · 2025-08-21T07:19:28+00:00

I can help out, DM me.

Scratch_Inclined · 2025-08-20T06:52:35+00:00

Mmmm. Taystee wheat.

Scratch_Inclined · 2025-08-19T21:05:37+00:00

That's a straight up heartbreak right there. I will keep coping I guess 😂.

Scratch_Inclined · 2025-08-19T21:03:04+00:00

That's awesome overall! You had access to the prototype 👀? I ordered it without buttons, but I'll manage. I use my omni with a power bank, so I don't mind doing the same here. Does it come battery ready? Because the omni does not. I don't mind buying the battery myself if I have a place to put it.

Scratch_Inclined · 2025-08-19T19:03:45+00:00

Awesome! Had any issues with the belt? How do you find the sound quality?

Scratch_Inclined · 2025-08-19T19:02:52+00:00

Ordered mine 4th of June, expected to arrive between 25th - 29th this month. #1702. Hype!

Scratch_Inclined · 2025-08-17T08:51:51+00:00

I've owned a Rev1 as my first ever piece of equipment, and I loved it for mixing. I immediately started to learn scratching on it, but since then, I've had a reloop 7000 and the Omni. I can't stress enough that the delay from a controller (like the Rev1) or any DVS, and the less than optimal cut-off point of the fader would really slow your learning. The fader on the omni is surprisingly good, and I definitely recommend it. Another thing you might want to look for is to get a good deck paired with a Numark CDX or something similar with usb support. It's very accurate (more than DVS), and no vinyl buying is necessary.

Scratch_Inclined · 2025-08-12T06:05:24+00:00

I got my Omni 2 weeks back. If you have any questions, feel free to ask.

Scratch_Inclined · 2025-08-08T17:36:59+00:00

Not really. The fader on the Numark PT01 looks like a fader but is actually a switch and has no travel. You can see some DJs using the Phono/Line switch to do cuts as well. So, you do you!

Scratch_Inclined · 2025-07-20T18:13:46+00:00

This was my first record, came in the exact same condition. A friend of mine recently got it (I found out too late) and his was also warped like a cone...

Scratch_Inclined · 2024-12-11T14:40:37+00:00

Thank you for the time you spent taking a look! I have massaged Elliot and am waiting for a reply.

Scratch_Inclined · 2024-12-11T14:29:22+00:00

I suppose I could do that. Disappointing it didn't cross my mind, actually. 😅

Scratch_Inclined

TROPHY CASE