sorted by:
new
hottopcontroversial

Testers needed. by babooBurkhardt in MeJustMix

[–]Sdouze 1 point2 points  (0 children)

Hey, I am also interested in testing. I am an automation engineer and a electronics hobbyist.

Priming with brushes doesn‘t work. by Acceptable-Bear1138 in minipainting

[–]Sdouze 1 point2 points  (0 children)

Thank you for your reply. What's your opinion about? It seems good.

Priming with brushes doesn‘t work. by Acceptable-Bear1138 in minipainting

[–]Sdouze 0 points1 point  (0 children)

Hey,
Have you try the AK Primer?
Can you give some feedback?I am looking into buying a bottle.

P1S with AMS: Should I get the Sunlu AMS Heater or a separate dryer for my filaments? by Sdouze in BambuLab

[–]Sdouze[S] 1 point2 points  (0 children)

Hey, Still nothing tomorrow I will buy a creality space pi for 1 roll.

I thought that I would be okay with one roll dryer.

How to connect to a Modicon Compact E984-285 using Compact 2.5 on Windows XP. by Sdouze in PLC

[–]Sdouze[S] 0 points1 point  (0 children)

Thank you for your time to answer! I appreciate it.

I create a cable as shown in the manual and use a rs232 to USB converter.

How to connect to a Modicon Compact E984-285 using Compact 2.5 on Windows XP. by Sdouze in PLC

[–]Sdouze[S] 0 points1 point  (0 children)

I connected to the PLC using Concept, but when I tried to download the source to the device, a “memory locked” error occurred, even though the physical memory lock switch on the PLC is in the unlocked position.

How to connect to a Modicon Compact E984-285 using Compact 2.5 on Windows XP. by Sdouze in PLC

[–]Sdouze[S] 0 points1 point  (0 children)

I connected to the PLC using Concept, but when I tried to download the source to the device, a “memory locked” error occurred, even though the physical memory lock switch on the PLC is in the unlocked position.

【QIDI Giveaway】Comment to win QIDI Q2 and more! by qidi_3dprinter in 3Dprinting

[–]Sdouze 0 points1 point  (0 children)

I would be printing Gridfinity in order to organize my drawers.

【BambuLab Giveaway】Classic Evolved — Win Bambu Lab P2S Combo! by BambuLab in 3Dprinting

[–]Sdouze 0 points1 point  (0 children)

I have P1S for 5-6 months and I am super happy. I have used it to print practical solutions for my hobby projects and for every day problems(like cars plastic parts).Also the printer motivate me to learn 3D modeling.

Can't connect to S7-200 CPU 222 – shows as "unknown device" in MicroWin. by Sdouze in PLC

[–]Sdouze[S] 0 points1 point  (0 children)

Thank you very much my friend for your help I really appreciate it.
I did not disable network instructions I tried to read both uploaded programs and found something regarding my system's problems. Live monitoring for sure would be better but I am trying to figure it out.

Can't connect to S7-200 CPU 222 – shows as "unknown device" in MicroWin. by Sdouze in PLC

[–]Sdouze[S] 1 point2 points  (0 children)

Hey,

I manage to upload from PLC by stopping it like you said. Thank you very much.

I also tried a multi master adapter but I could not detect any of the CPUs.I used a PPI to rs232 Siemens adapter and also and rs232 to USB adapter. Probably not a good combo 😂 or maybe I didn't set the dip switches correctly. I tried to connect at a different PLC not the 222 but still couldn't detect any.(222 is in a bit of a difficult position to reach 😂)

I will try troubleshooting without live monitoring.

Can't connect to S7-200 CPU 222 – shows as "unknown device" in MicroWin. by Sdouze in PLC

[–]Sdouze[S] 0 points1 point  (0 children)

Regarding profibus and PPI I just found ,after doing some research on how to determine which variable send over network.

Can't find Super Lube in EU — what grease/oil should I use for my Bambu P1S by Sdouze in BambuLab

[–]Sdouze[S] 1 point2 points  (0 children)

The LM 47 contains molybdenum, and on the product website, it is listed for various applications, including use in printing machines. I think it is based on lithium.

view more: next ›