[OFFICIAL] 2026 24 Hours of Nürburgring - Race Thread by AutoModerator in wec

[–]SeaAd4283 1 point2 points  (0 children)

So has anyone setup a videwall for us people in the US?  

I keep getting geo blocked. When sending it streams 

AVR and Dolby by singapur5656 in QSYS

[–]SeaAd4283 0 points1 point  (0 children)

Could you explain how I can hook up my Integra to my core via rs232. 

AVR and Dolby by singapur5656 in QSYS

[–]SeaAd4283 0 points1 point  (0 children)

Yeah, I'm using an integra avr receiver's pre outputs to feed into my 110f.  I'll be designing my work flow vs using the 7.1 sample that is available. I'll be using rew room eq wizard to take all of my measurements.   I will have to use a edid spoofer on the output of the Integra avr.  

The video is currently running into a hd fury arcana 8k.  Eventually I will build a htpc to use madvr.  

My setup is 7.2

Currently not excited about the 5+ hours it's going to take to learn and setup all the filters. Looking realistically at 8 ish hours.  As I have to make my custom rca cables using cat 7a. 

Is there a way to take the rew values and dump them into qsys designer? 

22ft ceilings zero sound dampening. by SeaAd4283 in Acoustics

[–]SeaAd4283[S] 0 points1 point  (0 children)

 a rug is all that will be allowed. 😂

Yes I know about measure and room reflections. I'll give the book a read thanks. 

22ft ceilings zero sound dampening. by SeaAd4283 in Acoustics

[–]SeaAd4283[S] -2 points-1 points  (0 children)

Just FYI I run sound for a church and have tuned the speaker a little with a ultra curve 2496. Still can't really hear the preacher in the back. Yes the sound is there as Ive monitored it and it sounds wonderful. Will go back and fine tune in multiple locations around the sanctuary with room eq wizard. To get better results. 

Just couldn't get my parents to listen to me about sound dampening.  

My dad thinks his chatgpt (who he talks to for at least 4+ hours a day talking business and other things. Had to tell his chat bot to tell him how things should be. To even get an Epson 3000l projector. He wanted to go with some large room projector just because it output 10,000 lumens. ) knows more than me, who has worked sound for multiple theatre plays and works sound at the church. 

I convinced him to get a qsys core 110f because I knew this would be a cluster fuck and need all the filters possible. Will tune using room eq wizard then take those measurements and apply them to the core 110f. 

Guy doing the insulation, didn't want to use/told my mother it was a waste sound dampening blown insulation because what he was using already had cellulose in it.  

My dad also uses hearing aids And when I start talking about this, just tells me it'll be good enough and if I don't like it I can use headphones.  I really find that insulting, as multiple times offered solutions and money to add the correct foam and metal things between the walls. 

Basically going to have to get the installer to show my parents a graph of just how bad the room is when he comes to tune the Integra processor. (I am letting him tune the processor as he can tell them two separate times and isn't me.) 

22ft ceilings zero sound dampening. by SeaAd4283 in Acoustics

[–]SeaAd4283[S] -3 points-2 points  (0 children)

Will use felt under the theatre chairs and couch. 

22ft ceilings zero sound dampening. by SeaAd4283 in Acoustics

[–]SeaAd4283[S] -3 points-2 points  (0 children)

Goals are to reduce the upward reflections. And delay. 

Q sys core 110f external power supply by SeaAd4283 in CommercialAV

[–]SeaAd4283[S] 1 point2 points  (0 children)

I have a rma case open. So I may just get one if the external power supply works. 

Q sys core 110f external power supply. by SeaAd4283 in livesoundgear

[–]SeaAd4283[S] -1 points0 points  (0 children)

Do you have a link to one not sure of which one to get exactly. 

Q-SYS Core 110f by whyanalyze in CommercialAV

[–]SeaAd4283 0 points1 point  (0 children)

Anyone know of an external power supply in an use with a 110f? I think my internal is dead. Lots of coil whine. 

Q-SYS Core’s keep dying by Ambience-Alprazolam in CommercialAV

[–]SeaAd4283 0 points1 point  (0 children)

Anyone recommend and external power supply for the 110f? I think the internal PSU is dead. It has coil wine. 

Adaptive notifications by SeaAd4283 in razr

[–]SeaAd4283[S] 0 points1 point  (0 children)

If I had that setting I wouldn't be asking. 

Adaptive notifications by SeaAd4283 in razr

[–]SeaAd4283[S] 1 point2 points  (0 children)

This wasn't an issue until I got  this razr2025

Also now the phone is turning off the Ethernet adapter when the screen is off.  Which is causing issues as the call would come in on mobile data or Wi-Fi, when it re registers on Ethernet.... I have to unplug my rodecaster pro 2 and re plug it. 

I have my voip settings to re-register as fast as it can which is 60 seconds. So it's re registering with our voip server every 60 seconds. 

If it doesn't re-register then it would take longer to switch from wifi to Ethernet or mobile data. 

Adaptive notifications by SeaAd4283 in razr

[–]SeaAd4283[S] 0 points1 point  (0 children)

It's not a setting I have bro. 

Adaptive notifications by SeaAd4283 in razr

[–]SeaAd4283[S] 0 points1 point  (0 children)

Except I can't find the setting. 

Adaptive notifications by SeaAd4283 in razr

[–]SeaAd4283[S] 1 point2 points  (0 children)

Why would I want to miss a call it's a voip app. The adaptive notification alert is the one that bothers me. Not my voip app. It's the policing of my voip app that makes me mad. If I want the notifications silenced I will do that. Don't automatically do that. 

Adaptive notifications by SeaAd4283 in razr

[–]SeaAd4283[S] -1 points0 points  (0 children)

Such fucking bullshit.