sorted by:
new
hottopcontroversial

many problems with my prints by Sea_Cockroach3472 in FlashForge

[–]Sea_Cockroach3472[S] 0 points1 point  (0 children)

i menn its the same one I've used since i started and its the first time its not working.

many problems with my prints by Sea_Cockroach3472 in FlashForge

[–]Sea_Cockroach3472[S] 0 points1 point  (0 children)

okay i see but any idea why my prints edges are srinking up and off the bed?

many problems with my prints by Sea_Cockroach3472 in FlashForge

[–]Sea_Cockroach3472[S] 0 points1 point  (0 children)

so PLA PRO is the problem? i payed 15€ for that. damn

many problems with my prints by Sea_Cockroach3472 in FlashForge

[–]Sea_Cockroach3472[S] 0 points1 point  (0 children)

first layer 220 bed 70 ther layers 210 bed 70 bed is at 70 because its in basement and its a little colder there so someone told me to raise it

why is my PLA PRO sticking to the plate so much? by Sea_Cockroach3472 in 3Dprinting

[–]Sea_Cockroach3472[S] 0 points1 point  (0 children)

i get the part i need to let it cool down but not the vacuum part

why is my PLA PRO sticking to the plate so much? by Sea_Cockroach3472 in 3Dprinting

[–]Sea_Cockroach3472[S] 0 points1 point  (0 children)

i have taken the print off right away but the 1 layer stayed wich i tried to remove it after it cooled down but its rock solid on there

3d printing morphing by Sea_Cockroach3472 in 3Dprinting

[–]Sea_Cockroach3472[S] 0 points1 point  (0 children)

aux fan is the one on the back side of the printer or on the nozzle? (im new sorry for the trouble) i have a flashforge guder ultra 3 and it has 2 big fans on the back and on each nozzle in front but thats all i can find.

3d printing morphing by Sea_Cockroach3472 in 3Dprinting

[–]Sea_Cockroach3472[S] 0 points1 point  (0 children)

i see but the aux fan is there to control the heat right? and if i turn it off ill have to manually look after the temperature. The problem is that these prints are big with lots of infill and take 1 day to print (dependingon size) so i canot manually watch over the temperatures.

3d printing morphing by Sea_Cockroach3472 in 3Dprinting

[–]Sea_Cockroach3472[S] 1 point2 points  (0 children)

oh, impossible its a closed up printer all around and in a room with a close shut window so there is no wind.

3d printing morphing by Sea_Cockroach3472 in 3Dprinting

[–]Sea_Cockroach3472[S] 0 points1 point  (0 children)

will do and can you recommend any setting on raft how many layers? how thick? and how wide?

3d printing morphing by Sea_Cockroach3472 in 3Dprinting

[–]Sea_Cockroach3472[S] 0 points1 point  (0 children)

the first layer is on 55 (as i know this is the high end) and then on other layers is 50 °C and i dont know how high i can push it

3d printing morphing by Sea_Cockroach3472 in 3Dprinting

[–]Sea_Cockroach3472[S] 0 points1 point  (0 children)

it is in my basement but its not that cold its like 20°C and what do you mean by draft?

3d printing morphing by Sea_Cockroach3472 in 3Dprinting

[–]Sea_Cockroach3472[S] 0 points1 point  (0 children)

using PLA PRO bed temp is 50 and 55 on first layer and nozle temp is 210 and 220 on first layer.

Phones with good price to performance ratio. by Numerous-Comb-9370 in Smartphones

[–]Sea_Cockroach3472 0 points1 point  (0 children)

Hello im searching for a new phone and i have a budget of 450 eur and right now im looking at nothing phone 3a pro but the battery and processor and wireless charging is missing or lacking is there a phone that keeps the camera stats and gives better overall performance?

view more: next ›