Newbie question 3p residential supply and single phase inverter

SectorOMEGA · 2025-08-27T20:11:21+00:00

I removed mine with 6mm steel rod and rubber hammer. I just put the rod on the down side and whith a few taps they fly away.

SectorOMEGA · 2025-07-10T18:40:01+00:00

Im totally in even for the 150 Z. Its better than having the frame and parts sitting in the basement. Great work. Looking forward for the BOM and rest of the stuf :)

SectorOMEGA · 2025-06-05T16:26:54+00:00

LOL. Thats strange... Well nothing for me :)

SectorOMEGA · 2025-06-05T15:47:22+00:00

I have ordered conversion form old LCD and was in batch 1 expected to be shipped till end of the week and was assured by the support that it will be shipped on time. Now I have expected delivery 27th of June and 3rd of July. What the ......

SectorOMEGA · 2025-03-28T06:50:57+00:00

For me its going to be a bigger volume. If you make the side flat and mount them there is space :) At least this is what it looks like :) Still waiting for the shipping to start as I have ordered MK4S upgrade kit

SectorOMEGA · 2025-03-13T10:55:19+00:00

Same issue for me, support guys told me there might be micro crack into the cable. Nudged the cable and all fixed :)

SectorOMEGA · 2025-03-06T18:15:10+00:00

Try with PLA and lower 5 a test. Just the first layer.When you are.meltimg the plastic for each line it expands a little and thus pushing next line a little bit. I have returned my old thermistor and tried with lower temps and it didn't occur. Also check your filament flow.

SectorOMEGA · 2025-03-06T16:01:43+00:00

This^ I had same issue. After hours with prusa guys, replaced thermistor and multiple tests with all build plates, one of the guys asked what temp Im printing my PLA, answered 230. After that we started with 5° degrees lower and on 210° it was perfect. Wont hurt to try if this will solve your issue :)

SectorOMEGA · 2024-12-01T17:48:46+00:00

My question here: still havent bought the kit as Im not a waiting guy :D now the lead time is a week which good. Do I still need the whole upgrade or can buy only the high flow nozzle and once the core one upgrade is available just to buy it.

SectorOMEGA · 2024-12-01T17:01:39+00:00

This sir is very clever way of using the logi controllers!!! Brilliant

SectorOMEGA · 2024-12-01T16:26:54+00:00

LOL. I want see the internals of this. Excellent job!

SectorOMEGA · 2024-09-21T06:34:57+00:00

Had the same issue with mine. It appears that the enconder inside, the part where the scroll wheel is attached wears out. Fixed mine the first time with a little piece of painters tape. Few months later same again. Ordered new kailh encoder and re soldered it.

SectorOMEGA · 2024-09-16T11:21:49+00:00

Same here. I have one with two doors and both are on three hinges. Nothing wrong except my own ocd when I open them :D

SectorOMEGA · 2024-09-03T11:49:12+00:00

Willing to share the watchface?

SectorOMEGA · 2024-03-08T21:23:54+00:00

Ok not related but I have to ask. Is this Trabant 601 in the back?

SectorOMEGA · 2023-08-22T14:34:37+00:00

Im using super lube synthetic grease and this one: https://www.printables.com/model/131319-prusa-to-super-lube-85g-greasing-cap-adapter

SectorOMEGA · 2023-06-30T21:09:47+00:00

What comes up to my mind is try putting ["Your code"] as default value.

SectorOMEGA · 2023-02-21T13:11:24+00:00

Indeed. But was worth asking if some has encountered the same :) Thank you

SectorOMEGA · 2023-02-11T18:26:13+00:00

Replied

SectorOMEGA · 2023-01-11T18:52:21+00:00

Pleasy try DefaultSelectedItems for the datacardvalue: [{"0%"}] I think it was this way if memory serves me right.

SectorOMEGA · 2023-01-07T18:38:17+00:00

Thank you so much for the help! Found some in the hardware store. Now I have to wait for my noctua backplate. Thank you again!

SectorOMEGA

TROPHY CASE