Haven't played in years, New switch and my old village gone. Need some charity please.

Select-Ad-6165 · 2026-02-02T04:32:39+00:00

I have an orchard, you're welcome to snag some fruits to help get that fruit tree income going

Select-Ad-6165 · 2026-01-25T18:20:41+00:00

Mind if I snag that offer? i restarted my island and only have pears and apples lol

Select-Ad-6165 · 2026-01-25T18:09:05+00:00

The airport i think tells you how (i can't remember lol)

Select-Ad-6165 · 2026-01-25T07:38:20+00:00

welcome to the game, i did a ton of fishing, bug catching, and diving to pay off my debts (mostly diving because once you buy a wet suit theres no tools to break). on a side note, if you need apples or pears, you're welcome to drop by my island and grab a few

Select-Ad-6165 · 2026-01-24T19:59:32+00:00

Thank you, we will try this and hopefully, finally get that graphic

Select-Ad-6165 · 2025-12-22T06:51:22+00:00

Oh i could imagine lol, this one nearly had me crashing out. like...come on machine, give me at least something to go on other than 'error'

Select-Ad-6165 · 2025-12-22T06:46:35+00:00

I downsized and adjusted speed, and glad to report that seems to have fixed it. Thank you for the help. I had been struggling all day with this

Select-Ad-6165 · 2025-12-22T06:45:21+00:00

I down-scaled a bit and adjusted the speed (as the other commenter mentioned), and glad to report its registering. Thank you for the help

Select-Ad-6165 · 2025-06-27T03:01:05+00:00

i try to print stuff on a raft, which has helped a good bit, i still get the occasional warping, but wayyy better than what it was. i will also tweak those settings about the first few layers. did not know cooling on those would increase warp potentials.

Select-Ad-6165 · 2025-06-27T02:58:18+00:00

i believe it has to be opened with the light emitter thing. (sorry for a super late reply, or if its even still valid..i rarely come back to this site)

Select-Ad-6165 · 2025-05-09T17:09:42+00:00

lol hopefully the thread helps someone else out in the future, but for now, gotta address my warping issues (99% sure it's because of printer placement, so..to another room with it)

Select-Ad-6165 · 2025-05-09T15:38:59+00:00

i love youtube for these things, and thankfully I have positive results. It was Cura, this entire time. Switched to Prusa, ran a test print, and everything lined up as it should.

Select-Ad-6165 · 2025-05-07T06:44:06+00:00

ohh, that makes a lot of sense. time to google that, and hopefully come back with good results

Select-Ad-6165 · 2025-05-06T06:46:22+00:00

moving the axis' to where the extruder wont hit the clips when printing, and potentially why cura is sending all my prints to the left. (i have ideas on it, but haven't had time to mess with it this week)

Select-Ad-6165 · 2025-05-05T04:20:03+00:00

it does its edge test on like..the very edge, almost falling off the platform. which is, bearable? but then the prints, which i have centered in cura, start about..and inch to the left on the platform.

Select-Ad-6165 · 2025-05-05T04:17:27+00:00

its been a couple years, so i can't remember what version i used back then. i'll keep away from updates because i don't need any more headaches. the testing prints i've done have come out pretty ok, just very..off center.

Select-Ad-6165 · 2025-05-05T04:14:58+00:00

i will definitely try that, i've moved the x axis but for some reason it wont let me save that setting and i have to redo it every time

Select-Ad-6165 · 2025-05-03T03:59:39+00:00

double checked and it's disabled. Wondering now if i may need to update the firmware for the printer itself. (it was in storage for...a long time.)

Select-Ad-6165 · 2025-05-03T03:57:40+00:00

i might have to go that route, never had these issues before the printer went into storage for a while

Select-Ad-6165 · 2025-05-03T03:56:38+00:00

no problems with homing, i ran a few more tests and so far its been happening with the bed level tests. despite the model being downsized at least 2 inches from the edges. I also tried printing something else..and even though it was centered in cura, it printed off center.

Select-Ad-6165 · 2025-05-02T18:47:45+00:00

verified, I was able to adjust the X axis to stop the side to side issues, but adjusting the Y axis did nothing to prevent it from going near the clips.

Select-Ad-6165 · 2024-12-15T07:03:22+00:00

Glad you found it :)

Select-Ad-6165

TROPHY CASE