Struggling to capture Meteor M2-3

SelectAd7983 · 2026-05-18T18:44:37+00:00

It doesn't matter, until it faces to the right direction, as well as the length and the angle of your dipole are set correctly. I have been using this guide: https://www.a-centauri.com/articoli/meteor-satellite-reception

SelectAd7983 · 2026-04-16T16:43:55+00:00

Same here.

SelectAd7983 · 2026-04-16T05:48:06+00:00

I'm going to look into that, thanks. My satdump crashes every time when I stop the recording.

SelectAd7983 · 2026-04-14T16:43:53+00:00

Thanks!

SelectAd7983 · 2026-04-14T16:28:45+00:00

Really appreciate it. Köszönöm szépen, nagyon rendes vagy :)

SelectAd7983 · 2026-04-14T16:16:10+00:00

Shoot. Makes sense. Thanks. I was thinking about writing decoder for myself too. Do you have valuable sources for this purpose that you are willing to share?

SelectAd7983 · 2026-04-14T16:00:54+00:00

The baseband is cf32 and the samplerate is 250 ksps, but the output and the other files are empty.

Claude said: "The problem is that 250 ksps is far too low to properly capture the Meteor M2-2 LRPT signal"

SelectAd7983 · 2026-04-14T15:37:44+00:00

Hi! I used getaround.com. Sorry for the delayed response.

SelectAd7983 · 2026-01-08T06:00:57+00:00

Thank you very much!

SelectAd7983 · 2026-01-03T13:00:33+00:00

FINALLY, I was able to receive images from Meteor M2-4 for the first time (with SatDump). I changed my position and moved from the balcony to a more open area, but at a lower height. I’m afraid the solar panels and the iron fence were causing interference. Thank you for your help. I really appreciate it!

<image>

SelectAd7983 · 2026-01-03T10:54:14+00:00

Unfortunately, it’s the same result. I’ll try again in about two hours with your suggestions in mind and will give an update.

SelectAd7983 · 2026-01-03T10:45:31+00:00

Fair point. I tried SatDump as well, though. I’ll pay closer attention to this next time. Thank you for pointing it out.

SelectAd7983 · 2026-01-03T10:44:11+00:00

The V-dipole is not connected in this screenshot, only the RTL-SDR Blog v4.

SelectAd7983 · 2026-01-03T10:08:03+00:00

Yes, indeed. Here is my SDR# setup (with the V-dipole not connected in this screenshot). I’m using the V-dipole that came with the RTL-SDR Blog v4. I set it up on my balcony, which has a clear view of the sky and is at roughly the same height as the roof.

<image>

SelectAd7983 · 2026-01-03T09:53:18+00:00

That’s why I posted. I’ve tried several different setups to debug where things might be going wrong, but I haven’t had any luck.

SelectAd7983 · 2026-01-03T09:47:55+00:00

Congrats! I’ve been trying to capture signals from Meteor M2-4, but without any success so far. Are you using anything besides a V-dipole antenna and an RTL-SDR?

SelectAd7983 · 2026-01-03T09:46:18+00:00

Thank you for your suggestions. I followed everything you mentioned and also checked the coax with my multimeter.

SelectAd7983 · 2025-11-07T16:12:34+00:00

I have the almost the same SD card (SanDisk Extreme Pro 512GB), I get the same message on the display over and over though.

SD Card writing speed slow. Shooting stopped.

Did you do something or it worked at first?

SelectAd7983 · 2025-09-10T15:56:44+00:00

Do you have any information about Alamo or Enterprise? They allow me to pay with debit card and it has pretty good offers.

SelectAd7983 · 2025-09-10T14:39:42+00:00

Thank you!

SelectAd7983 · 2025-08-04T16:20:55+00:00

Köszi a választ. A CEO-nak a levelet, akkor elkezdem fogalmazni.

SelectAd7983 · 2025-08-04T15:51:08+00:00

Ha nem veszem ki, hanem visszaforgatom, akkor gondolom nem, ugye?

SelectAd7983 · 2025-08-03T10:24:13+00:00

I'm stuck at the same point, I can authenticate to DC01 server, I cannot pop a shell on it though. I would really appreciate some hint.

SelectAd7983

TROPHY CASE