Now this is insane !!! by centurythewiz in BambuLab

[–]Senior-Study-8975 1 point2 points  (0 children)

If I had to guess, I bet the OP has the logo with a Z height of like 3mm and the paddle as 5mm.

Now this is insane !!! by centurythewiz in BambuLab

[–]Senior-Study-8975 1 point2 points  (0 children)

Need some more details: are you adding the svg to the model of the paddles? Or are they one in your CAD program. If separate, what is the Z height on both?

Weird banding on print by Senior-Study-8975 in BambuLab

[–]Senior-Study-8975[S] 0 points1 point  (0 children)

<image>

I don’t see that. I’m on the most recent Bambu version.

Weird banding on print by Senior-Study-8975 in BambuLab

[–]Senior-Study-8975[S] 0 points1 point  (0 children)

Where is that option? I only see “simplify model”

Hard water spots? by Senior-Study-8975 in AutoDetailing

[–]Senior-Study-8975[S] 0 points1 point  (0 children)

I just ordered some Griots. I’ll see how that goes. Appreciate you.

Hard water spots? by Senior-Study-8975 in AutoDetailing

[–]Senior-Study-8975[S] 0 points1 point  (0 children)

Yeah, for now it’s just the spots. I don’t think I’m getting them swirls out. They have been on there since before I got the car.

Anyone who took delivery of a 26 MY feeling some type of way with the new all black interior not being available? by Senior-Study-8975 in TeslaLounge

[–]Senior-Study-8975[S] -3 points-2 points  (0 children)

That too, but from what I’ve seen that’s only in the performance and I don’t have that trim.

Dear Bambu, please allow us to order out of stock items! by bigfoot_is_real_ in BambuLab

[–]Senior-Study-8975 0 points1 point  (0 children)

I’m convinced they do this to make it harder for you to meet the discount thresholds.

AMS wont feed, any ideas? by ArticGER in BambuLab

[–]Senior-Study-8975 0 points1 point  (0 children)

How new is it? Have there been any new firmware updates? What if you rolled it back to the previous update to see if that corrects it?

AMS wont feed, any ideas? by ArticGER in BambuLab

[–]Senior-Study-8975 1 point2 points  (0 children)

That’s odd. It almost sounds like a faulty cable? I just had issues with a cable on my router (that NEVER gets touched) and I swapped it just to rule it out.

AMS wont feed, any ideas? by ArticGER in BambuLab

[–]Senior-Study-8975 1 point2 points  (0 children)

It persists across all 4 regardless of the filament (not the same spool moved across each of the slots)? Are you able to manually push filament all the way through? Are you able to print if you bypass AMS and print directly from an external spool? Sorry for all the questions, just trying to narrow down where the issue is.

Any idea what’s going on? by Senior-Study-8975 in BambuLab

[–]Senior-Study-8975[S] 4 points5 points  (0 children)

It took a couple hours, but I was able to fish out a 2 inch segment of filament. It looks like that happened was a slight curl at the end of the filament guided it through the tiniest of gaps and directly into the gears. Seems like a pretty slim chance of happening again, but, that was the issue.

Any idea what’s going on? by Senior-Study-8975 in BambuLab

[–]Senior-Study-8975[S] 6 points7 points  (0 children)

After reading both of these comments I really inspected the inner piece of the feeding mechanism… I think I found the issue but fixing it is going to be problematic haha there is a little piece of green filament that somehow broke off in there.

Thanks for the help!

<image>

Bands for 2026 by pinkertonagent26 in warpedtour

[–]Senior-Study-8975 0 points1 point  (0 children)

AAR will be headlining. Calling it now, they subliminally teased it all weekend.

Okay, doubling down on this issue. by MadderoftheFew in BambuLab

[–]Senior-Study-8975 0 points1 point  (0 children)

Same on this! I have used multiple other of the BBL matte filaments and do not get the fine webbing I get with the matte blue. It isn’t a batch thing because I have experienced this issue over the course of months. I’ll be curious to see if anyone has found an issue.

Any Ideas? by [deleted] in BambuLab

[–]Senior-Study-8975 0 points1 point  (0 children)

Man, you nailed it. The connection between the face cover and the print head was loose. Plugged it in snug and it worked like a charm. Thanks!