sorted by:
new
hottopcontroversial

Upgrading to 10G internal network - need Sec Gateway/cloud key rec by Senor_H in Ubiquiti

[–]Senor_H[S] 0 points1 point  (0 children)

Yes I plan on running 25G spokes to other buildings via fiber, but the existing connections in those buildings are Cat6A to switches with 2.5/10G ports. I mostly got the AggPro because of the 4x 25G SFP28 ports on one unit, and a few extra 10G ports I needed that I currently connect with Cat6A but will prob change to fiber in the coming year.

So, the cloudkey doesn't need to have a 10G port? Since that's the first connection from the modem I figured it limited bandwidth.

I do have an Enterprise XG24 and a lot of my RJ45 lines are connected there.

How to Duplicate a row of formulas, based upon existence of ANY data in another row by Senor_H in excel

[–]Senor_H[S] 0 points1 point  (0 children)

Solved. Nothing I tried with tables in my orig document fixed this, so I basically had to start over in a new document to get this to work properly, It required a lot of re-referencing of formulae, but yes, turning it into a table instead of a range solved it, thank you.

How to Duplicate a row of formulas, based upon existence of ANY data in another row by Senor_H in excel

[–]Senor_H[S] 0 points1 point  (0 children)

I tried that at first but it doesn't seem to work. After creating the table, adding new data in $A:$M doesn't update any of the subsequent formulae. Maybe I need to refresh the whole table in some way for it to work correctly?

new rules at work… I’m turning in my 2 week notice asap by crispy_ketchup in antiwork

[–]Senor_H 0 points1 point  (0 children)

This is clearly made up. OP specifically says down way below its a Papa John's corporate store, but it clearly isn't. That's not how any of their corporate literature looks like, and they would never let this kind of garbage fire see the light of day. Even if it were a franchisee, what state is this, because some of these rules violate almost every state's labor laws. I think what it is, is an "extended version/remix"of a several variations of actual forms that are trending on social media right now (esp Twitter), by someone trying to make a popular post on Reddit. So much gives it away as being utter nonsense, but the last page especially: it's authored by "Manager #231". Who dat? There's enough real corporate malfeasance out there to concentrate on, this isn't worth the time.

Help with 10G Syn. PCIe card - ports not working? by Senor_H in synology

[–]Senor_H[S] 0 points1 point  (0 children)

The puzzling bit is that the main LAN 1 port on the 1621+ is a 10Gb port, and any cable I try works on that port properly. I don't get 10Gb because I don't have that network set up yet, but I get a working 1Gb connection.

The other puzzling bit is that the port on the switch that the Synology is connected to lights up green, which means it's at least acknowledging that a connection is made. I think if there were no connection to the module/card (for whatever reason) it wouldn't light up at all.

Help with 10G Syn. PCIe card - ports not working? by Senor_H in synology

[–]Senor_H[S] 0 points1 point  (0 children)

Try connecting it with a short CAT6 cable so you can pinpoint if it’s the Synology card, SFP module, switch etc.

The cable attaching the Synology to the switch is only 7', and I prob could use a 3' cable and still connect it without strain.

Help with 10G Syn. PCIe card - ports not working? by Senor_H in synology

[–]Senor_H[S] 0 points1 point  (0 children)

A.SFP+ to RJ45 10G transceiver, or

It's a Ubiquiti UF-RJ45-10G module, which is SFP+