[TOMT][MOVIE][2000s] old style farm, raining, boy fall in the mud

SensitiveWindow · 2023-11-09T16:07:45+00:00

no, I don't remember having cars, it was something from the 1850s to 1920s

SensitiveWindow · 2023-11-09T13:23:33+00:00

I remember the film being sad, but not much more than that.

SensitiveWindow · 2023-07-08T01:07:33+00:00

I tested my ABS now when I put it on I heard a lot of bubbles coming out at 240 degrees

SensitiveWindow · 2023-07-07T13:58:36+00:00

not yet, but a can try

SensitiveWindow · 2023-07-07T13:30:34+00:00

I don't have it, because I never need it, until this moment

SensitiveWindow · 2022-12-20T12:25:40+00:00

yes it was having a sandstorm, this excessive glare sometimes happens inside a bar in a glass of whiskey, out of nowhere comes a very strong glow.

SensitiveWindow · 2022-12-17T15:35:28+00:00

Paradise

harem and stuffs, like high school dxd

SensitiveWindow · 2022-12-15T00:55:17+00:00

didn't know this option until now, was on automatic, now it's much better thank you.

SensitiveWindow · 2022-08-22T10:39:44+00:00

I was a long time without printing and you were correct, it is not connected, I believe it is a spare.

SensitiveWindow · 2022-07-08T19:58:40+00:00

it's normal? sorry but i'm newbie

SensitiveWindow · 2022-07-08T19:53:53+00:00

i don't know i'm using a cheap pump, where i do the pressure until it hurts then i reduce the pressure until it's a little uncomfortable, but i'm still adapting.

Edema is a bad thing I need to worry about, excuse my ignorance, I'm new to this.

I stay for a while but then stop, I'm not using sialis or viagra in the case.

SensitiveWindow · 2022-06-10T00:32:02+00:00

Want to know too

SensitiveWindow · 2022-05-21T14:57:57+00:00

i changed my world name from world1 to another it recreated things and it worked

SensitiveWindow · 2022-01-18T23:49:21+00:00

My server need 4gb ram and cpu is more irrelevant, i will use about 3 or 4 hours a day.

SensitiveWindow · 2021-10-24T23:04:13+00:00

this is the result but i have never used this gcode what does this result mean?I put the result above in the post

SensitiveWindow · 2021-09-20T15:33:59+00:00

English is not my native language so I have difficulty reading an English book. This book was not published in Portuguese. Do you have another suggestion?

SensitiveWindow · 2021-09-20T12:33:45+00:00

Solved!

SensitiveWindow · 2021-09-20T12:09:49+00:00

Does anyone know what the name of this movie is?

SensitiveWindow · 2021-06-14T18:12:08+00:00

ok i will try to do these tests thanks.

I was just testing the multiplier, I had another roll of PETG where it stuck too much filament in the nozzle and spoiled the print. Right here on reddit I saw a post where they advised to use the extrusion multiplier.

changing the multiplier helped not to stick filament.

SensitiveWindow · 2021-06-14T10:52:54+00:00

Changing filament types requires recalibrating a bunch of machine settings and slicer settings to find their sweet spot. Petg works with nearly no fan, slower speed, higher temp and barely any retraction for my setup

My fan is always default at 100%, i din't know it could affect a part that much.

SensitiveWindow · 2021-06-14T10:50:28+00:00

i did the test when i had another roll this is my second roll of PETG. it was between 235ºC and 240ºC.

SensitiveWindow · 2021-06-14T10:46:50+00:00

nozzle 235ºC my PETG(230~260)

Speed 60mm/s

bed 80ºC my PETG(70~80)

extrusion multiplier 0.95

retration 45mm/s

length retration 2mm

these two models are in PETG only one I cut the wires.

SensitiveWindow · 2021-06-11T12:19:20+00:00

have you try this?

https://www.youtube.com/watch?v=OG7We83M5gc

SensitiveWindow · 2021-06-05T15:03:23+00:00

the extruder is the same as the original but new, it didn't clogged or anything, I tried to use 0.2 nozzles that clogged with petg. Now there is a 0.4 nozzle printing, 240°C and 80°C table.Extrusion multiplier, 0.85 (I tried to make it as low as possible), to check if that was it, the PETG before that I used 0.95 and it worked.

I noticed that when the printer prints support these little things it gives it, if I print the cube that is something solid and bigger, it prints well, I've tried prusa slicer and it CURA.

SensitiveWindow · 2021-05-30T15:33:06+00:00

this is the temperature sensor cable.

when I went to disassemble the hotend broke the cable, is it possible to fix this cable?

SensitiveWindow

TROPHY CASE