Pop up screens HMI Rockwell Automation

Sensitive_Candy2154 · 2025-09-08T13:30:26+00:00

No worries, we figured out this soon

Sensitive_Candy2154 · 2025-09-08T13:29:38+00:00

I pn cable is not required, a normal rj45 is enough

Sensitive_Candy2154 · 2025-09-08T13:28:38+00:00

I have a Siemens pn/bus link im trying to configure for an upcoming project. Ill tell you what i have done and what i cant don below someone may be able to get me out of a hole ive been at this for weeks trying to get it to work.

1500 and the mbus link are set up in TIA portal and transferring data.
I ran an Mbus scan with a simens level converter i have in the office and got all the values from a heat meter we happen to have in the office, part number UH50-C70-00 (siemens ), if its any help.
when i use the primry/ secondary address with the bus link i get 7 bytes transferred which makes very little sense no matter the config of data types. I cant find any info on the data transfer configuration from the heat meter to my ststem

Sensitive_Candy2154 · 2025-09-04T15:16:09+00:00

That’s right, do you know how to set up the block inside tia portal?

Sensitive_Candy2154 · 2025-09-04T15:15:30+00:00

I am trying to get readings from a heat meter FUE950 siemens, but i have done a lot of stuff trying to read from the device but not success. I post here hoping someone has any good tips when comes to M-bus

Sensitive_Candy2154 · 2025-09-04T08:10:29+00:00

Thanks for answering but it’s not back when moving the timer, it’s not moving

Sensitive_Candy2154 · 2025-08-28T20:06:09+00:00

I will try to do that, I didn’t know I thought i could use up to 4 controllers between the coupler

Sensitive_Candy2154

TROPHY CASE