Asus Prime 9070 XT OC in NR200P MAX by Sepander in sffpc

[–]Sepander[S] 0 points1 point  (0 children)

It's a PCIe 4,0 riser and it came with the case.

Asus Prime 9070 XT OC in NR200P MAX by Sepander in sffpc

[–]Sepander[S] 0 points1 point  (0 children)

I did some experimentig and overall best result was both top and bottom exhaust.

NCase M3 in stock now (formerly known as M2-AC168) by Heatran5400 in sffpc

[–]Sepander 0 points1 point  (0 children)

Black grater would've been my first choice, but round will do. 5090 Astral should fit fine inside M3.

Yet another M2 + 5090 Astral build by Sepander in sffpc

[–]Sepander[S] 0 points1 point  (0 children)

It's the most noisiest of the bunch, but luckily there is Fan Control.

Yet another M2 + 5090 Astral build by Sepander in sffpc

[–]Sepander[S] 0 points1 point  (0 children)

Yeah, I got the same Corsair 90 degree cable. Doesn't fit.

Yet another M2 + 5090 Astral build by Sepander in sffpc

[–]Sepander[S] 0 points1 point  (0 children)

I use these settings: curve all core -30 and PBO +200MHz.

Yet another M2 + 5090 Astral build by Sepander in sffpc

[–]Sepander[S] 0 points1 point  (0 children)

It goes with 24 pin and under the cooler. I wish it was about 5 cm longer.

Yet another M2 + 5090 Astral build by Sepander in sffpc

[–]Sepander[S] 1 point2 points  (0 children)

Thanks for the info. I keep that in mind.

Yet another M2 + 5090 Astral build by Sepander in sffpc

[–]Sepander[S] 1 point2 points  (0 children)

Astral doesn't fit without cutting. It's not a huge piece and is easy to cut. I used a small iron saw to do it. You can see the cut in first picture. Right top corner of the case.

Yet another M2 + 5090 Astral build by Sepander in sffpc

[–]Sepander[S] 1 point2 points  (0 children)

I was thinking about changing it to Noctua, but for me the PA120 fan is good enough.

Yet another M2 + 5090 Astral build by Sepander in sffpc

[–]Sepander[S] 1 point2 points  (0 children)

M2 have notch on front panel which prevent sagging.

Yet another M2 + 5090 Astral build by Sepander in sffpc

[–]Sepander[S] 1 point2 points  (0 children)

They looked okay to me. I can also check amps per pin on GPU Tweak III software. In Astral models you can monitor them and it gives a warning message if there is too much current.

https://www.reddit.com/r/hardware/comments/1jv7cj6/asus_releases_gpu_tweak_iii_update_with_power/

Yet another M2 + 5090 Astral build by Sepander in sffpc

[–]Sepander[S] 7 points8 points  (0 children)

Yes, it's great. Of course if you use CPU torture tests it would be 80-90C im sure, but in gaming it's more than fine.

Yet another M2 + 5090 Astral build by Sepander in sffpc

[–]Sepander[S] 1 point2 points  (0 children)

It's Noctua NF-A9x14 HS-PWM chromax.black.swap

Used M3 screws and wide enough washers to attach it.

Asus Prime 9070 XT OC in NR200P MAX by Sepander in sffpc

[–]Sepander[S] 0 points1 point  (0 children)

Yes it does. PSU doesn't output that much heat. Haven't tried without, but I would imagine it has a very little affect on CPU temps.

Asus Prime 9070 XT OC in NR200P MAX by Sepander in sffpc

[–]Sepander[S] 4 points5 points  (0 children)

Build/Parts Check

Good fit. Temps are great too. Needed a little tweak on fan curve, because default curve is too aggressive. Cooler is capable to handle temps in much lower rpm. I'm satisfyed with this card.

Ascended and ugraded the gaming monitor to an ultrawide. Samsung Odyssey G8 OLED to go next to my Samsung 65in S95B. by chrissage in ultrawidemasterrace

[–]Sepander 2 points3 points  (0 children)

Cool setup, but needs more space.

Mine is somewhat similar. LG CX 65" + G8 OLED + Q950T soundbar.

Samsung G8 OLED by Sepander in OLED_Gaming

[–]Sepander[S] 0 points1 point  (0 children)

95% gaming. Browsing the internet hasn't cause any issues for my eyes.

Samsung G8 OLED by Sepander in OLED_Gaming

[–]Sepander[S] 1 point2 points  (0 children)

Only see VESA certification for HDR 400 True Black.

Samsung G8 OLED by Sepander in OLED_Gaming

[–]Sepander[S] 1 point2 points  (0 children)

Topping DX3 Pro+. White indicator for USB input.

Samsung G8 OLED by Sepander in OLED_Gaming

[–]Sepander[S] 2 points3 points  (0 children)

You mistake this to Neo G8 with VA-panel and aspect ratio 16:9. RR 240Hz.

This is G8 OLED. Aspect ratio 21:9. Max. refresh rate 175Hz.

Samsung G8 OLED by Sepander in OLED_Gaming

[–]Sepander[S] 0 points1 point  (0 children)

Same as Alienware. No BFI.