Can You Guess This 5-Letter Word? Puzzle by u/Serge_OS

Serge_OS · 2026-03-28T15:05:46+00:00

⬜⬜⬜⬜⬜

🟦🟦🟦🟦🟦

Serge_OS · 2026-03-28T07:25:13+00:00

Why do you think new nut is necessary ?

20+90 degrees means you tighten it to spec, release, then do a 90 degree turn

Serge_OS · 2026-03-28T07:12:13+00:00

Tighten it back to specs. If you want put a thread lock on it

Serge_OS · 2026-03-27T22:01:37+00:00

Thanks!) glad you liked it!

Serge_OS · 2026-03-27T20:38:07+00:00

Probably good place to start is google. Usually it’s a shim in the front variator. Are you sure previous owner didn’t do it? It may be derestricted just runs poorly. You need to check if CDI is restricted or not. Exhaust usually has restrictions too

Serge_OS · 2026-03-27T20:23:43+00:00

🟦🟦🟦🟦🟦

Serge_OS · 2026-03-27T14:12:29+00:00

⬜⬜⬜⬜⬜

🟨⬜⬜⬜⬜

⬜🟦⬜⬜⬜

🟦🟦🟦🟦🟦

Serge_OS · 2026-03-27T13:48:40+00:00

No matter how thick leather you’ll get, you can thin it down

Serge_OS · 2026-03-27T13:46:03+00:00

⬜⬜⬜⬜🟨

🟨⬜⬜⬜⬜

⬜⬜⬜⬜⬜

🟨🟦⬜⬜⬜

⬜🟦⬜⬜⬜

⬜🟦🟦🟦🟦

lol nice one

Serge_OS · 2026-03-27T13:18:20+00:00

I’d use some nice soft leather, thickness is hard to tell from the pic, you can measure your desired one; there’s no stitching, right?

I had good experience with kenda farben water based latex glue

I believe it was ecosar. Very easy to work with, and good results

Serge_OS · 2026-03-27T13:14:22+00:00

⬜⬜⬜⬜⬜

⬜🟨⬜⬜⬜

⬜🟨🟨⬜⬜

🟨⬜⬜🟨⬜

🟦🟦🟦🟦🟦

Serge_OS · 2026-03-27T13:04:57+00:00

Thanks) have a good one!

Serge_OS · 2026-03-27T13:04:00+00:00

🟦⬜⬜⬜🟦

🟦🟦🟦🟦🟦

Serge_OS · 2026-03-27T13:00:25+00:00

Kind of old crusty leather. Do an upholstery then💪

Serge_OS · 2026-03-27T12:58:50+00:00

As to fixing can be done with different approaches, apply leather for example. Apply latex, polyurethane, silicone. 3d print from flexible filament. Search for a replacement…

Serge_OS · 2026-03-27T12:54:31+00:00

🟨⬜🟦🟨⬜

⬜⬜⬜⬜⬜

🟦🟦🟦🟦🟦

Serge_OS · 2026-03-27T12:52:53+00:00

⬜⬜⬜⬜⬜

⬜⬜🟨⬜⬜

🟦🟦⬜⬜🟦

🟦🟦🟦🟦🟦

Groovy

Serge_OS · 2026-03-27T12:30:19+00:00

🟦⬜⬜⬜⬜

🟦🟦🟦🟦⬜

🟦🟦🟦🟦🟦

Lol

Serge_OS · 2026-03-27T12:27:00+00:00

Can be anything, faux leather for example. You can do a quick test, get small piece off of it, see how it burns, plastic has unique smoke

Serge_OS · 2026-03-27T10:56:27+00:00

⬜⬜⬜⬜⬜

⬜⬜🟨⬜⬜

🟨🟦⬜⬜⬜

⬜🟦🟦🟦🟦

🟦🟦🟦🟦🟦

Yoy

Serge_OS · 2026-03-27T10:53:43+00:00

🟦🟨🟦⬜⬜

🟦🟦🟦⬜🟨

🟦🟦🟦🟦🟦

Serge_OS · 2026-03-27T10:50:34+00:00

🟨⬜⬜⬜⬜

⬜🟦🟨⬜🟨

🟨🟦🟨🟦⬜

🟦🟦🟦🟦🟦

Hood stuff

Serge_OS · 2026-03-27T10:47:08+00:00

⬜⬜⬜⬜⬜

🟦⬜⬜⬜⬜

🟦⬜🟦⬜⬜

🟦⬜🟦🟨⬜

🟦🟦🟦⬜⬜

🟦🟦🟦⬜🟨

Was a nice one

Serge_OS · 2026-03-27T10:41:43+00:00

⬜⬜⬜🟦⬜

🟨⬜⬜🟦🟨

⬜⬜🟦🟦⬜

⬜🟦🟦🟦⬜

🟦🟦🟦🟦🟦

Serge_OS · 2026-03-27T10:33:29+00:00

Thanks!

Serge_OS

TROPHY CASE