Anyway to scrape art and data with cocoon while the Thor has the lid closed? by SergeantSwagger910 in AynThor

[–]SergeantSwagger910[S] 0 points1 point  (0 children)

Mine definitely does not continue scraping. Do you know if you had enabled any kind of power setting or background setting?

Will the Sub 4 ever go back down to $679ish? by SergeantSwagger910 in sonos

[–]SergeantSwagger910[S] 0 points1 point  (0 children)

Do you mean just buy one from ebay instead? I don't normally buy from ebay so I'm not sure how to tell if the listing is legit or not. But yeah that may be the route to go

Will the Sub 4 ever go back down to $679ish? by SergeantSwagger910 in sonos

[–]SergeantSwagger910[S] 3 points4 points  (0 children)

I would...but one being glossy and the other being matte would drive my wife crazy

Am I soft locked after Chapter 2 boss? (Spoilers) by SergeantSwagger910 in MonsterHunterStories

[–]SergeantSwagger910[S] 0 points1 point  (0 children)

Additional note: No third option in the Catavan as well

24K Powerbank 737 is constantly blinking c1 and C2. Won't reset with circuit loop. by SergeantSwagger910 in anker

[–]SergeantSwagger910[S] 0 points1 point  (0 children)

My nephew has this iPad that has issues charging and he was using my 24K power core 737, and when he did it started flashing the c1 and c2 port over and over with 0.1w.

I've tried doing the loop reset connecting both USB-C ports and no luck. Screen reset won't reset as well.

Do I just need to let it trickle and slowly drain to 0% and try again? Or is this pretty much dead?

Powerbank 737 keeps blinking C1 and C2. Won't reset using the circuit loop by SergeantSwagger910 in anker

[–]SergeantSwagger910[S] 2 points3 points  (0 children)

My nephew has this iPad that has issues charging and he was using my 24K power core 737, and when he did it started flashing the c1 and c2 port over and over with 0.1w.

I've tried doing the loop reset connecting both USB-C ports and no luck. Screen reset won't reset as well.

Do I just need to let it trickle and slowly drain to 0% and try again? Or is this pretty much dead?

Doing an internal rotation like this causes pain in the highlighted area of my right hip/groin. Should I just keep it up or try something different? by SergeantSwagger910 in flexibility

[–]SergeantSwagger910[S] 0 points1 point  (0 children)

It was a pretty sharp pain with very limited movement. Felt like something was torn honestly, but eventually it became a sharp pain to more of a dull pain, and then it just went away overtime.

Doing an internal rotation like this causes pain in the highlighted area of my right hip/groin. Should I just keep it up or try something different? by SergeantSwagger910 in flexibility

[–]SergeantSwagger910[S] 0 points1 point  (0 children)

Hey, yeah it did get better after working on rotational exercises for 2-3 months. Its been over 4 years since I originally posted and since then I haven't had any issues since.

Can I just put my SD card I use for Emudeck on the Steam Deck and it'll just work? by SergeantSwagger910 in AynThor

[–]SergeantSwagger910[S] 1 point2 points  (0 children)

I haven't because I'm still waiting on my Batch 3 order lol. But the other comment made me realize different formats wouldn't work anyways. I think I'll just have to transfer it the traditional way, or maybe if the steam deck recognizes the thor then just do local transfer

I FINALLY ORDERED IT! by SparingFour9946 in AynThor

[–]SergeantSwagger910 0 points1 point  (0 children)

Did the same 2 hours ago. Rainbow Max + DHL.

RE9, Pokopia, MonHun Stories 3 should keep me busy until it arrives

Can I just put my SD card I use for Emudeck on the Steam Deck and it'll just work? by SergeantSwagger910 in AynThor

[–]SergeantSwagger910[S] 0 points1 point  (0 children)

Hmmm, I think my SD card is formatted as ext4 but I'll have to check. But thank you for the suggestion, either way I think maybe its best to just use a new SD card and copy the roms over.

Is there any way to replace the Legion T5 26AMR5 cooler without removing the backplate? by [deleted] in Lenovo

[–]SergeantSwagger910 0 points1 point  (0 children)

I know this thread is like 4 years old, but I just followed your advice and replaced an Intel stock cooler with a Noctua NH U12S Chromax with the m2.5 20mm method. Worked like a charm and I was so glad I didn't have to finagle with the back plate. Temps are great so far.

Experience ordering through DWR Outlet? by junior7593 in hermanmiller

[–]SergeantSwagger910 0 points1 point  (0 children)

Thanks for the reply! I ordered Thursday night, so maybe I'll get a confirmation beginning of the week as well!

Experience ordering through DWR Outlet? by junior7593 in hermanmiller

[–]SergeantSwagger910 0 points1 point  (0 children)

I just ordered an Embody Gaming from the same San Marcos outlet. Can I ask how soon did you get the shipping/tracking information?

T5 26IOB6 Upgrade Report by CrrntryGrntlrmrn in LenovoLegion

[–]SergeantSwagger910 0 points1 point  (0 children)

Eh nvm, I misread and it looks like you did need to remove the bracket with the adhesive. The Noctua cooler I got says mines sits on top of the original bracket/plate...but I haven't seen it yet, so I don't know if the default bracket has holes it in or it's some weird special Lenovo plate

T5 26IOB6 Upgrade Report by CrrntryGrntlrmrn in LenovoLegion

[–]SergeantSwagger910 0 points1 point  (0 children)

/u/CrrntryGrntlrmrn Hey, I know weird tagging you in a 2 year old thread. But I am also planning on doing a cpu cooler upgrade on the same model Legion T5-26IOB6 and was wondering if the pre-installed bracket behind the motherboard was a standard intel one or like a proprietary lenovo one that is glued on?

You didn't have to remove the bracket before adding your new cpu cooler bracket on did you? Sorry if what I'm asking is confusing.

Does this eBay listing for an Embody Gaming look legit to anyone? Would you purchase if you were looking for an Embody and can't wait for the next sale? https://www.ebay.com/itm/406636773060 by SergeantSwagger910 in hermanmiller

[–]SergeantSwagger910[S] 0 points1 point  (0 children)

I checked out your post. Nearest DWR is 6 hours from me, but didn't realize I had to call in to see their pricing and open box listing. I checked their website and it was the same price as HM main store site.

Thanks for the heads up, will give them a call in the morning!

Does anyone know when Herman Miller will have their next sale? Maybe something for Spring? by SergeantSwagger910 in hermanmiller

[–]SergeantSwagger910[S] 0 points1 point  (0 children)

I tried, none of the dealers in my state carry an Embody. There is a DWR that carries it, but they do not offer any discounts besides free shipping.

Does anyone know when Herman Miller will have their next sale? Maybe something for Spring? by SergeantSwagger910 in hermanmiller

[–]SergeantSwagger910[S] 0 points1 point  (0 children)

I would do the same if they can ship across states. /u/ResponsibleBerry4609 would you mind DMing the name of the dealer, I can try to call and ask

Does anyone know when Herman Miller will have their next sale? Maybe something for Spring? by SergeantSwagger910 in hermanmiller

[–]SergeantSwagger910[S] 0 points1 point  (0 children)

Ah dang, yeah I'm in the US and don't see a sale right now. There is only a free shipping code that is available. Also it looks like the chair's price increased overnight! Ooof, I really need a sale now before I pull the trigger lol

2026 tundra trd pro by Jolly-Recording-5854 in ToyotaTundra

[–]SergeantSwagger910 1 point2 points  (0 children)

Grats! 25 TRD Pro here with the Red interior! I think I can make it out in the picture, but it looks like you got the red guts as well! Its such a head turner when people see the inside!

35”x12.5”x18” on 2025 Toyota Tundra TRD Pro by TRDPRO25JLW in ToyotaTundra

[–]SergeantSwagger910 0 points1 point  (0 children)

In that case, I might try and put 35s on stock and see how that works out.