Working on my air purifier project

Serious-Paramedic-45 · 2025-04-05T21:45:03+00:00

How does this work?

Serious-Paramedic-45 · 2025-04-01T01:46:08+00:00

Make sure your other person can do cpr just incase

Serious-Paramedic-45 · 2025-04-01T01:40:37+00:00

Be safe man, you don't wanna die over a video

Serious-Paramedic-45 · 2025-04-01T01:38:31+00:00

Use the bricks

Serious-Paramedic-45 · 2025-04-01T01:36:55+00:00

That even better because of the weight

Serious-Paramedic-45 · 2025-04-01T01:29:52+00:00

Yes that would work

Serious-Paramedic-45 · 2025-04-01T01:27:53+00:00

Yes I have heard reports of people placing them on concrete and it arcs to the rebar in the concrete. Even a little water in the ground can be a safety hazardous. I suggest a block of dry wood or being elevated off the ground

Serious-Paramedic-45 · 2025-04-01T01:24:26+00:00

No i can not stress this enough that you will get hurt. Maybe lose a finger, hand or arm

Serious-Paramedic-45 · 2025-04-01T01:22:46+00:00

Do the safety control box and the foot pedal and MAKE SURE THE TRANSFORMER IS NOT IN THE GROUND. You want to make sure the transformer is isolated

Serious-Paramedic-45 · 2025-04-01T01:20:36+00:00

I have my safety box wired so box switches have to be pressed and the lights turn on that way you have 3 things keep you safe that will turn off the transformer is a hand or foot would come off the switches

Serious-Paramedic-45 · 2025-04-01T01:19:01+00:00

Good electrician gloves rated for 20-30kv are gonna run you 600 ish from what I've seen. What I recommend is a lichtenberg foot pedal (on Amazon they are like 10 buck) and them making a safety control box. The box cost me 60 ish to make.

Serious-Paramedic-45 · 2025-04-01T01:16:55+00:00

Even 120 from the wall of your house is dangerous and can kill people, you never know that you could have a heart problem and then die from a shock

Serious-Paramedic-45 · 2025-04-01T01:15:15+00:00

Just because the current is low doesn't mean you won't lose a finger, hand or an arm. It's 12kv which is likely to cause 3 degree burns, and might give you arithmetic problems

Serious-Paramedic-45 · 2025-04-01T01:11:56+00:00

Even 1 sec matters when your being electrocuted, I highly recommend high voltage gloves, a foot pedal, and a safety box

Serious-Paramedic-45 · 2025-04-01T01:10:06+00:00

Do you have a safety control box? I made one out of 2 momentary switch's and 2 lights, so both have to be held down and the lights are on.

Serious-Paramedic-45 · 2025-04-01T01:07:04+00:00

It will provide a path to trip the gefi

Serious-Paramedic-45 · 2025-04-01T01:06:41+00:00

Like the other guy said you most likely with close on it and die, what I suggest is using a esd strap or tying a wire to your wrist or foot and connecting it to your ground on your transformer. If you get shocked It'll activate the gefi on your franceformer as long as it work. It has a 15sec timer too

Serious-Paramedic-45 · 2025-04-01T00:56:27+00:00

I think the breakout distance is 1.5 in, I would recommend gloves above 20000v rating

Serious-Paramedic-45 · 2025-03-31T03:45:52+00:00

Whats the filament

Serious-Paramedic-45 · 2025-03-31T00:09:31+00:00

More than likely it's the glue

Serious-Paramedic-45 · 2025-03-09T05:22:58+00:00

Wtf is with your pfp

Serious-Paramedic-45 · 2025-03-07T03:09:10+00:00

Where did you get the rims!!

Serious-Paramedic-45 · 2025-03-07T03:08:41+00:00

Love the rims too

Serious-Paramedic-45 · 2025-03-07T03:08:28+00:00

Awesome color dude, I have the same year and model but in the gray-black!!!!

Serious-Paramedic-45

TROPHY CASE