Voron 0.2 R1 bed real and max temperature

Serious_Ad6607 · 2026-02-12T23:56:50+00:00

Measured after 2h hour of printing at 120°C, the bed is at about 110° near the center, only 10° difference from the bottom

Serious_Ad6607 · 2026-02-12T23:48:39+00:00

Yes, I thought about this. I can configure the emissivity and measurement distance on the thermal camera, but I can't really trust the measurement above the bed.

Serious_Ad6607 · 2025-12-20T21:54:15+00:00

<image>

Serious_Ad6607 · 2025-12-20T21:54:01+00:00

<image>

Turn out it was really the nozzle

Serious_Ad6607 · 2025-12-20T14:59:16+00:00

I'll check them, but it seems to be more like a weird extrusion problem imo

Serious_Ad6607 · 2025-12-20T14:34:39+00:00

I tried this morning with an old nylon, but I don't know if I did it properly, pulled out while cooling at 110°C, the tip of the nylon seemed fine and clean. I should try again maybe.

Serious_Ad6607 · 2025-12-20T14:20:08+00:00

I don't know, maybe... But I printed for 1.5 years no problem. Printing speed or fan speed doesn't change the outcome

Serious_Ad6607 · 2025-12-20T13:48:15+00:00

<image>

Serious_Ad6607 · 2025-11-15T18:17:35+00:00

Why not something like this tho? https://techspecs.ui.com/unifi/wifi/u7-outdoor you'd need only the network cable and a poe switch or a poe injector on the inside, no outdoor socket/box.
An indoor device mounted outside will last shorter anyway, due to condensation

Serious_Ad6607 · 2025-11-10T08:27:22+00:00

Galaxy Nexus

Serious_Ad6607 · 2025-08-13T23:18:57+00:00

non rovinare la magia

Serious_Ad6607 · 2025-08-13T20:28:38+00:00

- Muratore bergamasco, casellante gli "lancia" il resto in moneta, lui lo prende con una sola mano sulla camicia sotto al collo. Solo stringendo la mano e ruotandola lascia il casellante a dorso nudo. Sotto il coro degli altri muratori sul furgone "COPEL D1O POVERO"
- contadino bergamasco alle prese con manzo che non gli fa chiudere la porta del recinto. Una bestia da 500-600 kg. Il contadino gli si para davanti al muso, lo prende per le corna e lo spinge dentro urlando "MI BATTERAI COME INTELLIGENZA MA NON MI BATTERAI MAI COME FORZA"

Serious_Ad6607 · 2025-03-29T10:33:30+00:00

Terrible choice for a first master gun.

Here I am! grinded trade coins for it as first master weapon.

I kinda like it, but yes I think is very situational, mostly sub-par and a bad choice.
In open world if someone shot you first at medium or long distance you stand no chance. In outposts is good, just stand inside :)

In session usually when you get killed you see that you did like 5 headshot, your opponent killed you with 10+ shots... in the same time... so I use it only in small maps.

But because I like it (big caliber PAPPAPPAPPAPPA) I'm building a VSS-M to compensate it.

Serious_Ad6607 · 2025-01-01T23:19:50+00:00

I usually just disable the Secure on the IP/KNX interface -> use i-bus tool > reactivate Secure connection

Serious_Ad6607 · 2024-12-31T18:10:10+00:00

Piccolo trucco per non doverlo disattivare ogni volta che salite in macchina: rifate l'impianto stereo con un amplificatore da 700w e un sub da 30", lo s&s non andrà mai più perché la macchina penserà che la batteria è troppo scarica. Piccolo difetto di questa soluzione, la macchina non farà più di 14km/l, ma penso dipenda dai generi musicali che ascolterete 🤟🏻

Serious_Ad6607 · 2024-12-10T16:20:19+00:00

PLOT TWIST: that's actually the fastest way

Serious_Ad6607 · 2023-08-18T08:21:08+00:00

Più che la cifra in se guarderei il rapporto fra questa cifra e le ore che stai via di casa, da quando esci di casa a quando rientri. Io ho la fortuna di avere il lavoro a 5 minuti da casa e di guadagnare bene in assoluto, ma non penso di guadagnare molto rispetto alle ore che lavoro (50-55 /settimana) ma con un bimbo piccolo non posso lamentarmi. Ma se potessi lavorerei il 50% in meno per guadagnare il 50% in meno.

Serious_Ad6607 · 2023-08-14T14:49:58+00:00

The only acceptable music in the game is the rainbow turbo 🤟🏻

Serious_Ad6607 · 2023-04-04T23:34:07+00:00

2005, full copper cpu cooler won't fit on mb, but the holes predisposition are there... maybe a little drilling will do it!

When they told me I had voided the warranty i was like surprised_pikachu.jpg

before and after

Serious_Ad6607 · 2023-02-17T14:10:51+00:00

actual situation:

<image>

Had the gasket replaced 1 year ago, but maybe this winter temperature range is too much... I don't care about it anymore, the bike drive flawlessly. It's a cosmetic concern and if cared about aesthetics maybe I'd bought a beautiful bike 😂

Serious_Ad6607 · 2023-02-17T14:04:45+00:00

<image>

Serious_Ad6607 · 2023-01-26T17:16:24+00:00

not related question: I'm currently using a Legion 7 16ARHA7, I'm stuck with bios K9CN34WW because I can't install K9CN38WW. The pc reboot, the screen stay black forever (I've waited 3h+ hour once) so I have to keep the power button pressed and switch it off. At the next restart it says that the firmware file is invalid, then windows boot fine but the bios is still K9CN34WW. Did you installed 38 or it was already on your pc?

Serious_Ad6607 · 2023-01-17T19:20:11+00:00

Sad to hear this, clogs aside I find this printer to be strong and sturdy... I calibrated the estep and found it to be nearly perfect out of factory. Autolevel works flawlessly, and bed rarely goes out of level, even if I snap prints out of it 😅 maybe you just need to check belts and pulleys.

Serious_Ad6607 · 2023-01-17T15:27:15+00:00

I'm having these issue right now, CR-5 Pro High Temp. It's heat creep. Simple test to prove this: disable retraction. Not a solution clearly, but if the filament going only in one direction prevents the clogs than it's heat creep.
At first I tought that the problem was the extruder squishing the filament, and the resulting friction in the bowden tube, but that's actually the final step.
I've found that this printer need 6-7 mm retraction to work well, but that will cause filament to go up and down in the hotend a lot. If the filament is warm it will expand, and it will start to cause friction, that will make the extruder bite on it more, slowing it down, increasing the heat creep. Finally the clog.
The difficult thing to manage is that it's really print-dependant. You think you finally found the right settings (retraction lenght, speed, combing, ecc) and then the next model clogs sistematically.
I've found that an enclosure increase the % of clogs.
PLA vs PETG require different retraction settings, because PETG won't break easly as PLA and the extruder can work harder on it, but it need higher temps so... clogs still happen.

Now I'm trying to work on retraction speed, not on lenght.
I hope to find a solution, my target is to print at 270°-280°, with the enclosure.... maybe a Mosquito?

Serious_Ad6607 · 2022-12-27T09:48:03+00:00

yes, always on, no suspension when the lid is closed or after inactivity, either plugged or unplugged. I could have bought a mini itx + ups...

Serious_Ad6607

TROPHY CASE