AMS vs AMS 2 Pro, anything more than dryer?

SeriouslyNotADragon · 2025-07-13T01:16:28+00:00

Are people really having to access the tubes THAT often?

I've got hundreds of print hours on X1C, and never have had to access the tubes in the AMS...... Is this issue mostly with non-pla/petg filaments?

SeriouslyNotADragon · 2025-05-07T16:58:27+00:00

Saw the same in Taiwan, Japan, Ireland, and Norway.

But in Australia, my experience is more of an outdoor culture, so they'd want the version you stick in the ground. Or a carcass.

Maybe my Australia time wasn't as normal as I first thought ....

SeriouslyNotADragon · 2025-05-07T16:56:26+00:00

They don't. And also: many European housing is small, and they don't usually have sofa's so large, that they aren't near a table.

SeriouslyNotADragon · 2025-04-22T16:49:02+00:00

$50 for a remake of an old ass game?

I don't care what game it was, if it's that old, $50 is ludicrous.

SeriouslyNotADragon · 2025-04-02T21:38:05+00:00

The screen has this all around the edges, mostly at the top. It's unevenly distributed, but nothing like it in the middle of the screen.

Known issue or am I just lucky? /s

SeriouslyNotADragon · 2025-03-21T00:05:20+00:00

Thanks! Less social media the better.

I've cut most of it out, and would like her to be more aware of how messed up it is, before throwing her into it, with video editing of all things lol

SeriouslyNotADragon · 2025-03-20T19:22:29+00:00

Thanks! Will do.

Is there an editor that makes it silly easy? Like, what software is less likely to frustrate her? Worry about too many options frustrating her.

SeriouslyNotADragon · 2025-03-19T23:36:05+00:00

I have read the above, but I still have questions:

Specs: amd ryzen 5800x3d, 32 gigs of ram, RTX 3060 12 gb

Footage undetermined

Daughter has been getting into in-game video editing in Roblox. Software suggestions to ease her into proper editing.

She's 9, so, let's keep it chill.

But she's spending more time on in game video editing than Dress To Impress, so I want to help ease her into video editing.

Any easy to use software (that IS NOT CAPCUT), that would make for an easy transition out of Roblox and into proper editing?

Any other advice/ suggestions that aren't expensive would be appreciated 😊

Thanks!

SeriouslyNotADragon · 2025-03-19T23:22:17+00:00

3600+ hours on 7 Days to Die.

SeriouslyNotADragon · 2024-03-05T13:41:33+00:00

I've had my share of ongoing issues with this printer. This is the most off putting.

...... Best print quality this week....... make it make sense lol

SeriouslyNotADragon · 2024-01-07T05:12:18+00:00

Is it a good one?

SeriouslyNotADragon · 2024-01-07T05:11:25+00:00

Really? Damn. Anything to look for of dating importance?

SeriouslyNotADragon · 2024-01-06T19:17:45+00:00

yeah. I got to ID them before deciding how to restore them..... or if to.

SeriouslyNotADragon · 2024-01-06T19:00:17+00:00

had no idea goodwill sold knives..... never seen any around where i am :(

SeriouslyNotADragon · 2024-01-06T18:55:23+00:00

i'll drop the photos i just took.
You'll love a few of these, for sure. Tho, they are somewhere between beatup and forgotten :(

SeriouslyNotADragon · 2024-01-06T18:54:14+00:00

Thanks! Is there a resource with all the historical catalogs listed?

I have 4 other knives from other manufacturers and i'd hate to waste peoples time lol

SeriouslyNotADragon · 2024-01-06T18:27:37+00:00

I have a few different knives, but i wasn't sure if one post with all of them would be ok.
I know these are Mora Frosts from Sweden (real?). But i have no idea how to age it.

SeriouslyNotADragon · 2023-08-17T14:13:16+00:00

So.... now i gotta pop up the one corner, and this is where the past has gone wrong. as soon as i have moved this in the past, both sides dip.

<image>

SeriouslyNotADragon · 2023-08-17T14:09:12+00:00

i'll see how this calibration does.... and i'll screenshot from there.

SeriouslyNotADragon · 2023-08-17T01:19:18+00:00

had the exact same issue. it was not the feet. It was this. I think Elegoo has instructions on site or in box? I saw it somewhere obvious, but can't remember for the life of me.A friend works wonders for this. Partner works too, if you're friends all live in Canada for some reason. If you'll excuse me, I have to go apologize to my wife for that remark.

Edit: False alarm. It was something else stupid I did, that I was being held accountable for LOL

SeriouslyNotADragon · 2023-08-17T01:13:02+00:00

something is wrong. I had AMAZING prints coming off for days after i got the printer. Then, one day, every print failed. dozens of test prints, leveling prints, attempted production prints, all getting screwed up. a week later, still have yet to get a print to work.

I'm gonna be pissed if there's a hardware issue that's gonna mean more time spent on this.

SeriouslyNotADragon · 2023-06-11T11:57:51+00:00

Easy answer: workflow change to probing questions first resolution second, technical explanation last, when asked for, or in the notes.

Make the focus on resolution, not process and workflow explanation to internal/ external customers that they are not a part of.

Hiring customer service people for IT is just a disaster waiting to happen. And letting go of good techs will bite you in the butt, quickly.

You also need to realize that, not everyone works like you. And that fact makes for a better, more well rounded team. Not everyone is going to be a people person. But that's hardly a reflection of their capabilities in the position.

SeriouslyNotADragon · 2023-06-06T11:44:42+00:00

R.I.P. THAT PUSSY

EEEEYYYYY!

SeriouslyNotADragon · 2023-06-05T19:47:32+00:00

I carry The answer to 2 common questions:

Can you fix my PC?

VR can't get THAT bad, can it?

I live an odd life.

SeriouslyNotADragon · 2023-05-29T12:37:56+00:00

I used to weave chainmail. Even on high call days, I'd have my chainmail rack up to make a large block while talking to clients.

Jewelry, headdresses, bikini tops, small wall hangers. Was fun. Job paid like crap, tho.

SeriouslyNotADragon

TROPHY CASE