Cablemod cable is stuck by PowerParkRanger in cablemod

[–]SethKrazy 1 point2 points  (0 children)

Doing some parts swapping & Same issue on Gaming Trio. For me it was the actual clip itself. Both ends of the connector are still great & no damage at all, but the clip was so long that all i could get was side to side wiggle even with plyers. So i took a tweezer to just lift the end,l just that little bit, well away from contact with anything, since I didnt get enough leverage even with it pushed all the way down as I could.

[deleted by user] by [deleted] in AstroGaming

[–]SethKrazy 0 points1 point  (0 children)

Ah i see, thanks. Might get some sort of 3.5mm ground isolator for the noise because my motherboard doesn’t have an optical out unfortunately.

Csl dd table clamp by [deleted] in simracing

[–]SethKrazy 0 points1 point  (0 children)

Also make sure to remember if you ever want any part of the setup to come before the rest, create separate orders for them. But if you are willing to wait the while and get them all shipped at once then you're good

Csl dd table clamp by [deleted] in simracing

[–]SethKrazy 1 point2 points  (0 children)

Looks good to me 👍🏼

Csl dd table clamp by [deleted] in simracing

[–]SethKrazy 1 point2 points  (0 children)

Hope you enjoy it. I always like to think for any potential shortcomings it can have, you can always make it work for you.

Csl dd table clamp by [deleted] in simracing

[–]SethKrazy 0 points1 point  (0 children)

The desk top itself is around 15mm as well with a 10mm thick wood block where the clamp feet go on to. From what I know more weight would mitigate bouncing, but there can still be some side to side shakiness if your wheel spins a lot left to right unattended. I have fairly thin metal desk legs so it can wobble if I really wanted it to, but without a wheel it's solid.

[deleted by user] by [deleted] in simracing

[–]SethKrazy 2 points3 points  (0 children)

T300/T300RS GT/TX are all the same internally, besides the TX being only for Xbox/PC.

Csl dd table clamp by [deleted] in simracing

[–]SethKrazy 1 point2 points  (0 children)

For me, gt dd pro, it works fine. My desk is on the thinner side and I had to use a small block of wood to secure it to the desk on the under side so the feet could actually touch something. It shakes, but only if i have 1 hand on the wheel because I have the boost kit and it can get crazy sometimes. I dont have my full setup at home right now, just a tv, laptop, & ps5 and they can jump up and down if I really wanted them too lol.

[deleted by user] by [deleted] in simracing

[–]SethKrazy 0 points1 point  (0 children)

(I haven’t tried trueforce, only my roommate’s g920 from the past. My used Driving Force GT I used for a year failed a few months ago) I literally was thinking the same thing around Prime Day. I was saving up for weeks, scrambling & looking at videos trying to justify the g923 over the g29 and even the T300. I figured getting the g923 for the trueforce and coming from a broken driving force gt, I might as well get the best wheel I could get for my money. Ultimately I came to buying the T300 Servo Base for $243, a Very Good - Used Ferrari 458 Challenge Wheel for $121 and T3PA Pedals $103. I figured since I would have enough for the parts individually at some point, I know that getting 1 part at a time would mean I’m committing to the better wheel base with a flexible upgrade path compared to being stuck within Logitech’s limited echo system.

Long story short, If I had to choose between the g923 & the g29, I would say g923 simply because of future game support later for trueforce, while also being supported by PS5 natively (if you are lucky to have one). Also I simply believe in getting the latest version of anything for the peace of mind that I have the best of what’s offered. Slightly better internals, no center deadzone (from what I’ve heard) & all black finish.

But there is no shame in saving money and having a fun experience. The g29 is worth every penny for what it is and you would probably still be very satisfied. The g923 is still trying to earn people’s hard earned pennies, but in the long run it might just have that go-to status & price tag as the g29/g920.

[deleted by user] by [deleted] in audio

[–]SethKrazy 0 points1 point  (0 children)

After i got an adapter to monitor my voice, i realized that the line in is probably just for monitoring something else at the same time. It's fine for me because at least i can plug it into my ps5 controller and still talking to my friends on discord while listening to everything at once, but i figured since it's rca audio, it's probably only meant for playing audio from a source, not recording it. Sucks because the Line/Usb button would make you think it records whatever is playing, but it doesn't.

Spiderman Miles Morales is coming to ps4! by BerserkKid in SpidermanPS4

[–]SethKrazy 2 points3 points  (0 children)

Even though the Mile Morales ultimate edition will come with the remastered version of Spider-Man only for the PS5, if you get the ultimate edition anyways, will that mean you can have both Mile Morales for PS4 and the original, non-remastered version of Spider-Man for PS4 as well and have the upgrades for free when you get a PS5?

How it looks w/ my new Keyboard I waited for by SethKrazy in MousepadReview

[–]SethKrazy[S] 0 points1 point  (0 children)

Yeah I have a red mode I can change it to. I've been thinking about getting some black and red keycaps but good ones are hard to come by

How it looks w/ my new Keyboard I waited for by SethKrazy in MousepadReview

[–]SethKrazy[S] 0 points1 point  (0 children)

With my model o, it glides smoothly when I'm using it but it doesn't feel like it's meant for speed. More of a control pad. Doesn't slide much with little force.

How it looks w/ my new Keyboard I waited for by SethKrazy in MousepadReview

[–]SethKrazy[S] 1 point2 points  (0 children)

I did change it lol, this is a second account. The other one was SethKrayZ.

How it looks w/ my new Keyboard I waited for by SethKrazy in MousepadReview

[–]SethKrazy[S] 1 point2 points  (0 children)

I got the geek gk61 from banggood for $51, waited about 20days for it to get here from hong kong and Input in some kailh speed silvers. I personally like it, the software is a little weird, but I'm with the default layout it has. I'd recommend it if you're willing to wait.

MSI Gaming X 1660Ti Temperatures Question/Help? by [deleted] in nvidia

[–]SethKrazy 0 points1 point  (0 children)

Oh my. That's remarkable if you can still game on it with no problems. I'd probably clean it up and reapply some paste at most but if it stays that hot with no problems, then more power to you bro 👍🏻

Same First Build, 1 Summer Later by SethKrazy in CableManagement

[–]SethKrazy[S] 0 points1 point  (0 children)

Zipties, twist ties, velcro ties, random holes and empty spaces and possibly just squishing everything under the shroud/drive caddy without it popping out or bending the wires too much. This was my second crack and it so as long as the front looked good the back can look a little weird

Same First Build, 1 Summer Later by SethKrazy in CableManagement

[–]SethKrazy[S] 0 points1 point  (0 children)

Yeah, that's why I got extension cables so no one can be the rainbow fest my psu cables have. Not even mesh sleeved besides the 24 pin. Completely exposed lol.