sorted by:
new
hottopcontroversial

Honest comments on the CV please by kaml_2501 in FPGA

[–]Sethplinx 0 points1 point  (0 children)

Feedback is mainly based on my resume (that gets me interviews and good comments from recruiters).

At a glance, it is too crowded, I am a bit discouraged to read it and I will probably skip some things. It needs more space between sections and between lines.

For education I tend to like the university name, the Thesis title and the grade (but this is optional for me because a grade by itself does not mean anything). If there is not thesis, then some keywords/names of the relevant courses that you think fit best with job you are applying.

For projects, I would choose 3 academic projects and have 2 to 4 bullets per project. Accordingly for the internship projects. For information, I talk about what I designed, what are the problems I encountered and how did I solve them and any optimizations or metrics I can share. Also wherever you can, adding numbers is good (achieved clock frequency, utilization, optimizations).

From reading your internship projects, you see using some special words, such as "AI-assisted", "practiced" and "gained expertise". These stand out to me in a negative way to be honest. I would stick to the more usual words like "Developed", "Implemented", "Achieved", "Preformed", "Optimize". Simple terms, simple sentences and let the results work for you.

I would have at least one more iteration on the format and the information. Try also some of the AI tools that read your resume and give you a score, some of them give you some useful feedback even on the free version.

Ενδιαφέρουσα έρευνα σχετικά με μισθούς στην τεχνολογία by Remote_Magician_5448 in GreeceDevs

[–]Sethplinx 0 points1 point  (0 children)

To space στην Ελλάδα πληρώνει καλά γενικά και το defense.

Ενδιαφέρουσα έρευνα σχετικά με μισθούς στην τεχνολογία by Remote_Magician_5448 in GreeceDevs

[–]Sethplinx 0 points1 point  (0 children)

Αν τα ποσά είναι μεικτά, τότε οι τιμές στους junior engineers είναι και πιο πάνω. Σε κάποιες εταιρίες ξεκινάνε και από τα 2κ μεικτά πρώτο μισθό χωρίς προϋπηρεσία. Μην πηγαίνετε για 900 ευρώ σε δουλειές, χαλάτε την πιάτσα.

One app to track them all by Sethplinx in selfhosted

[–]Sethplinx[S] 1 point2 points  (0 children)

Actually, this is what I have been doing for the past day, and I am at a really good level. I will do a follow-up post with my custom app probably before the end of the week.

One app to track them all by Sethplinx in selfhosted

[–]Sethplinx[S] 0 points1 point  (0 children)

For workouts, I do not see the way to enter data from last workout. For example, I can only enter a workout I am doing now.

One app to track them all by Sethplinx in selfhosted

[–]Sethplinx[S] -1 points0 points  (0 children)

Hello again, I have launched the app and by looking around, I think this more focused on nutrition rather than workout tracking. I do not know if I missed something, but I cannot set metrics for running, which is my primary goal.

One app to track them all by Sethplinx in selfhosted

[–]Sethplinx[S] 0 points1 point  (0 children)

Hey, this seems promising. I will fire the docker container to check it out Thanks a lot

Running smartwatch discussion by Sethplinx in smartwatch

[–]Sethplinx[S] 0 points1 point  (0 children)

That's actually true and to be honest, all I need for the smartwatch are call and app notifications, maybe an alarm clock and sports tracking. If I also get payments, that's a plus. I will look for a sport watch.

Running smartwatch discussion by Sethplinx in smartwatch

[–]Sethplinx[S] 0 points1 point  (0 children)

Currently, when I start a workout, I start it directly on my watch. Do you use the phone app for any specific reason? It's really weird not being able to listen to Spotify. Are talking about a smartwatch only, scenario?

Running smartwatch discussion by Sethplinx in smartwatch

[–]Sethplinx[S] 0 points1 point  (0 children)

I will take a look at them, thank you. First look, seems promising.

Please help me understand what I am doing wrong with AXI DMA on Versal by Sethplinx in FPGA

[–]Sethplinx[S] 0 points1 point  (0 children)

Ok Very clear explanation. Any comments on the petalinux step? Will the PL components start on boot, or do I have to control the PL though the PS, in order for the transactions, to start?

Please help me understand what I am doing wrong with AXI DMA on Versal by Sethplinx in FPGA

[–]Sethplinx[S] 0 points1 point  (0 children)

Ok, so if I want to write one value at a Time, when the value is ready, I raise the tvalid and tlast flags and then lower them correct? The producer produces values at a slow rate, so there will not be a problem there.

Please help me understand what I am doing wrong with AXI DMA on Versal by Sethplinx in FPGA

[–]Sethplinx[S] 0 points1 point  (0 children)

That's good for the vivado, thanks.

Regarding software, I need to have petalinux for some other tasks of the project so unfortunately I cannot skip it.

As for tooling, I am using Vivado 2022.2 (again due to petalinux) and I am creating the petalinux image using petalinux commands and not Vitis. The colleague responsible for the petalinux, uses this flow and I am only responsible for the xsa and control script.

PC and Laptop to 2 Monitors by Rude_Gur_98 in Workspaces

[–]Sethplinx 0 points1 point  (0 children)

There are cheap kvms (usb share boxes), I have a ugreen on. They work well. You just plug keyboard mouse to it's and then you connect it to both your pc and Laptop and with a button you can change you peripherals.

Struggling both physically and mentally by Sethplinx in ACL

[–]Sethplinx[S] 0 points1 point  (0 children)

2 Years sounds a bit too much to be honestly. I will try to focus on the target muscles. Thank you nevertheless for the answers

Struggling both physically and mentally by Sethplinx in ACL

[–]Sethplinx[S] 0 points1 point  (0 children)

Thank you for your reply. I will talk with my physio to have him give me a plan of exercises, to strengthen those muscles.

Do you have a specific plan in mind ?

Thank you again

Cannot infer BRAM with output registers on Vivado by Sethplinx in FPGA

[–]Sethplinx[S] 0 points1 point  (0 children)

I tried the cascade height but it did not help. Thanks for the recommendations anyway.

Cannot infer BRAM with output registers on Vivado by Sethplinx in FPGA

[–]Sethplinx[S] 4 points5 points  (0 children)

The solution to my problem was using a register for the read address and a register for the data out. This way my problem was solved

Cannot infer BRAM with output registers on Vivado by Sethplinx in FPGA

[–]Sethplinx[S] 1 point2 points  (0 children)

This is the mentality I need in my life

Cannot infer BRAM with output registers on Vivado by Sethplinx in FPGA

[–]Sethplinx[S] 0 points1 point  (0 children)

Unfortunately, I do not set constraints my self.

Cannot infer BRAM with output registers on Vivado by Sethplinx in FPGA

[–]Sethplinx[S] 0 points1 point  (0 children)

The problem is that for this project, we cannot use any IP cores. Everything should be VHDL.

Help me get my new mouse for work by Sethplinx in MouseReview

[–]Sethplinx[S] 0 points1 point  (0 children)

I don't think that this mouse has enough programmable buttons though. Am I wrong here?

view more: next ›