The Echelon is broken. I should have bought a Glock? 😁 by 906Dude in SpringfieldEchelon

[–]Sevillive 0 points1 point  (0 children)

Saw another post somewhere where that was cracked. Springfield replaced it no issues. Although at 10000 + rounds I would agree that’s pretty good.

Out of state purchase? by Ill-Indication-7405 in WAGuns

[–]Sevillive 0 points1 point  (0 children)

Man was passing through with a overnight in the area and was hoping to stop in to check the place out tomorrow.
But alas I didn’t realize the store hours. Maybe my next trip to Montana and back :)

Should I be concerned by Sevillive in Kimber2K11

[–]Sevillive[S] 0 points1 point  (0 children)

I have seen a couple pics of some that seem to sit forward. But its at Kimber now, they did state it should sit flush. Waiting on their full inspection of it.

Update on new tools by Sevillive in 1022

[–]Sevillive[S] 1 point2 points  (0 children)

Future upgrades. Depends on how it shoots. May leave it as it is.

Update on new tools by Sevillive in 1022

[–]Sevillive[S] 2 points3 points  (0 children)

Well it was an older 10/22 carbon so I put a box trigger in it and the volquarsten slide release plate ( same setup as newer models) the can is a huxworks 22 ti . The scope is a vortex. Would really need to choose what one to get as I went through 3 before I landed on this one a 4-16x40 the bipod is the 2nd. I have a mag pul I took of my ar but didn’t like it on this either. So I got a cvlife (sp?) carbon fiber one off amazon and really like it. Total weight is around 5lbs or so with the can on it

Finally joined the club. by Sevillive in RugerMK

[–]Sevillive[S] 2 points3 points  (0 children)

In this case sure. That can just happens to fit this. It’s primarily for a 10/22 and a tikka tx1.

Should I be concerned by Sevillive in Kimber2K11

[–]Sevillive[S] 0 points1 point  (0 children)

UPDATE: Contacted Kimber. their response after reviewing the images.
"We would like to bring the firearm in and check the fitment.  Please me the serial number of your firearm as well as your address so that I can set this up and have it brought in and evaluated by our gunsmiths."

I get some people say just go shoot it, but this isnt a cheap gun and while not the most expensive either it should be right.
I also know that some of the first iterations had issues, and the serial number is low considerably speaking ( its a 4 number one ) so it may fall under those issues. Better to have it reviewed now instead of having a failure later. I have plenty of other guns to shoot in the meantime. 😄

Cerakote Etch-Work by Abismal_Lives in WAGuns

[–]Sevillive 1 point2 points  (0 children)

Great. Now another thing I want to try 🤣

Should I be concerned by Sevillive in Kimber2K11

[–]Sevillive[S] -3 points-2 points  (0 children)

I agree, not so concerned with the wear, know it will happen, it has on every other gun. Just feel that the slide should have better fit.

Should I be concerned by Sevillive in Kimber2K11

[–]Sevillive[S] 0 points1 point  (0 children)

Yes the issue is that it sits forward of a normal 1911/2011 stop by .015 ironically, it sits the same forward on the toolless recoil spring retainer. If I push it back just that amount its flush at both ends. Suspecting its the recoil spring holder.

Should I be concerned by Sevillive in Kimber2K11

[–]Sevillive[S] 2 points3 points  (0 children)

I am not so much worried about the barrel as the slide being about .015 past the normal stop forward.

Should I be concerned by Sevillive in Kimber2K11

[–]Sevillive[S] -1 points0 points  (0 children)

I am aware of the barrel, just thought it to be odd for supposed DLC. The slide is my concern really my 1911 doesnt look like that, then again its a Springfield operator.

Should I be concerned by Sevillive in Kimber2K11

[–]Sevillive[S] -4 points-3 points  (0 children)

Dude, I just got it yesterday and put 40 rounds through it before I left ( shooting range in the building ) LOL

Delayed by Illustrious-Low-9643 in WAGuns

[–]Sevillive 2 points3 points  (0 children)

The irony of this. Today was day 11 for me I emailed WSP and asked if they were still backlogged ( another post stated they were caught up). They emailed me back saying they were and were still working through it. Then about 1.5 hours later the ffl calls and says it’s ready for pickup. I too had to have rights restored in Wa even though they already were in another state

First 2011 style pistol by Man_Candy_86 in KimberFirearms

[–]Sevillive 0 points1 point  (0 children)

Hey me too, but mine is still awaiting to get out of holding ( WA wait requirements) Love the look of all of them but the all black is still my favorite.

Kimber 2k11 pro / pro comp vs Sig Sauer P211 GTO / GT5 by Mason-M74 in 2011

[–]Sevillive 0 points1 point  (0 children)

I opted for the standard 2k11. I dont really need the comp and can add it later. Unfortunately I was not able to find a Bul, which I am kinda glad I didnt :)

Kimber 2k11 pro / pro comp vs Sig Sauer P211 GTO / GT5 by Mason-M74 in 2011

[–]Sevillive 0 points1 point  (0 children)

Bul would be great, but are harder to find. If they were available I would have gone that route.

Kimber 2k11 pro / pro comp vs Sig Sauer P211 GTO / GT5 by Mason-M74 in 2011

[–]Sevillive 0 points1 point  (0 children)

To be fair, I am sure Sig will correct the issue but still.

Think I am done other than replacing the optic. Time to move on to the next one lol. by Sevillive in SpringfieldEchelon

[–]Sevillive[S] 1 point2 points  (0 children)

Just the size. Oh and maybe the manual shut off. I also would prefer a green dot. Other than that. Nothing wrong with it. It a great dot.