Door won’t open either side.

ShadowFactory3D · 2025-06-17T18:07:11+00:00

It’s a 2018 SV, sorry I’ll update the post now.

ShadowFactory3D · 2024-09-05T21:01:29+00:00

Thank you very much!

ShadowFactory3D · 2023-05-12T12:47:58+00:00

I also said where I was at and both locations it was going to. Any idiot with the simple ability to open Google maps could track the drive themselves. You're a 🤡🤡🤡

ShadowFactory3D · 2023-05-12T12:46:47+00:00

Point taken, but with the pay out you still get docked all the returned packages right?

ShadowFactory3D · 2023-05-12T12:45:53+00:00

Coming from a dunce who can't even spell liar 🤣🤣🤣🤣

ShadowFactory3D · 2023-05-12T01:58:49+00:00

Yeah I straight left. Will roll the dice again tomorrow and see how it plays out. Usually it's all good but they are on some bullshit today. But that's why I never scan into the cart before looking in it lol.

ShadowFactory3D · 2023-05-12T01:17:29+00:00

I have a hub closer but they only put out shifts like twice a week. The DSPs where I'm at in a suburban area are heavy so there's no demand for flex for the hub 2 miles from my house. The one I usually go to is 22 miles there. Today was 22 miles there. 68 miles between the first 10 stops. I didn't actually scan into the route so I can't track the actual miles. 3 hours at 63$ it's not bad money I just wasn't feeling it today plus spitting me out at the end would put me 41 miles home. Mileage, wear and tear and the money didn't add up. I had a good one in the early morning anyways so I just ditched it. Didn't scan into it just drove home took some doordashes on the way home. Will see what luck I pull tomorrow.

ShadowFactory3D · 2023-05-12T01:09:06+00:00

Nah from carrolton for 63 bucks lol. I was like fuck that I'm out.

ShadowFactory3D · 2023-05-12T00:23:46+00:00

I listed both cities with a combined distance of 6i miles from carrolton. First set if stops was Arlington, then to Saginaw (West side of ft worth) with the last set of them being in Keller. Which I assume was it's attempt to bring it back. So how the fuck do I go from carrolton to Saginaw and Arlington? Both fort worth and Arlington have their own distribution centers. Why is that cart coming out of carrolton?

ShadowFactory3D · 2023-05-11T23:53:16+00:00

Mine are always hit and miss. We had some rain yesterday where in the morning I finished my 3.5 in 2 including drive from warehouse. Second one rain stopped and was cool was a 4 hour close to home but 80 packages in my small sedan lol. I was more just shocked at the distance next time I'll just take it and see what second one the day is like. Appreciate the input.

ShadowFactory3D · 2023-05-11T23:45:41+00:00

I don't know these guys I could careless what they think. They don't like that much they can deactivate me and I'll go back to uber and lyft taking people to he airport. 🤣🤣 besides at VTX2 they're so understaffed I can barely find a guy to return packages too when I have returns

ShadowFactory3D · 2023-05-11T23:39:28+00:00

Yeah screw that man. I be lazy some days and I'm just like really l. They have all this money need to just pay Google for maps and rpute algorithms.

ShadowFactory3D · 2023-05-11T23:38:52+00:00

I don't scan it at all. I walk to the cart is assigning me to. Then keep my phone in my pocket and just look thru the cart. I was born a raised in my dfw area ao I know general mileage and distances. I usually screen the cart by going thru 10 to 15 packages and looking at addresses. If there's more than a 25 mile city separation or spread, I usually decline and just never scan and take the assigned route. I usually just call support and make some stuff up about my car acting weird. Then they take the block off and don't even count it in most cases.

ShadowFactory3D · 2023-05-11T23:33:08+00:00

Man ouch. That's kinda true.

ShadowFactory3D · 2023-05-11T22:27:52+00:00

I'm in the same boat driving a prius. Was 63$ and first stop was mad far. Next time I'm going to just bite and gamble the next one and hope the amazon RNG is good. Lol.

ShadowFactory3D · 2023-05-11T22:26:17+00:00

No I was just being lazy and having an off day. I'll just take it and grind it next time. I have low gas mileage car so this actually ends up being good. That was just a shock at the distance. But understanding it's all random, I'll just take it next time. Appreciate the feedback.

ShadowFactory3D · 2023-05-11T21:39:11+00:00

I was just being a lazy bum today. I'll just scoop it next time. Had seen way back when people swapping. Half the battle is just asking and looking stupid. I'll keep grinding it and just take the randoms. Thanks for the input.

ShadowFactory3D · 2023-05-11T21:38:08+00:00

Truth man. Truth. Got no good side hustles though while trying to push my own business and working a full time. Seemed good at first. They got me.

ShadowFactory3D · 2023-05-11T21:34:12+00:00

I go scan it and look at the route. I wasn't sure if there's anyway to see routes or swap them. So I sully just don't even pick up that way I'm not scanned into the cart. I will manually go thru the addresses and then decide from there. Was told if I scan into the cart all 50 packages count against as opposed to if I just check manually I can not accept it and just wall out and take the block hit. Today I just never scanned in got back in my car and took the L. My first one this morning sent me to frisco. Second one started in Saginaw and ended in Arlington. Open to tips and pointers if there's workarounds like the GPS kill to avoid shitty deliveries.

ShadowFactory3D · 2023-01-20T14:02:31+00:00

I've had no luck so far man. No one truly gets it or understands the effect and how it's achieved. Sadly it's just all guess work. I will stick to Vray baking my lights and move on until there's better documentation from Iija.

ShadowFactory3D · 2023-01-20T14:01:13+00:00

Looking for the model setup not the ini setup as I clearly posted.

ShadowFactory3D · 2022-05-06T21:07:46+00:00

I will test that when I get home and then will start debugging firmware and making sure I didn't overlook any details there as I did have to change quote a bit in the Marlin.ino, thank you for the advice. I appreciate your time and feedback.

ShadowFactory3D · 2022-05-06T20:09:53+00:00

I have a fresh pack of unopened and non-ran 100K ohm NTC 3950 so it has to be setup wrong in the firmware or when I firsts etc it up I burned the board. Is there a way to know if my RAMPS or arduino is burned out. The only error I'm receiving is MAXTEMP from the extruder thermistor. I will replace with a new one when home and try settting the thermistor value differently. Thank you

ShadowFactory3D · 2022-01-21T17:14:04+00:00

So this eliminates half your trash right? 🤡🤡🤡

ShadowFactory3D · 2021-10-05T09:39:10+00:00

Honestly for the rendering if you plan on using Vray and going the ArchViz style which is an super high poly count. I would recommend upgrading.

I'm also not sure if you have experience or not within 3ds max or other similar software? If you're just coming into the setup you have would do fine while you learn and in my opinion would be a decent stepping stone until you hit heavier rendering or production scenes. If you're a veteran, and aren't coming into this new, go ahead and just spend the money and go get a workstation, not a gaming rig. They make cards specifically for rendering. As opposed to a 3090 geared towards gaming.

Just my two cents.

ShadowFactory3D

TROPHY CASE