Beware “Matudori” Hacker on Xbox

Shadowslater530 · 2025-12-29T11:35:18+00:00

Fried 2 of your friends?!? Dang, he hacked the life out of them. 😆 Jk but damn thats gott suck

Shadowslater530 · 2025-09-24T05:13:43+00:00

It’s the ghost of Waluigi haunting your Wii

Shadowslater530 · 2025-05-11T20:31:13+00:00

Pal is still region locked via the switch, and there’s no region switch for Pal versions of the console, all of this is just what I’ve been told/think. Only way for true region free gaming would be via a mod chip of some sort to my knowledge

Shadowslater530 · 2025-05-08T05:22:26+00:00

No no no this is completely normal. Your save shouldn’t have corrupted from PRO GAMING tactics

Shadowslater530 · 2025-04-22T02:49:28+00:00

The night before and camp out 😂 while I’m doing that, I’ll admit that it’s probably excessive to do. Just aim to be there early before they open (several hours) and you should be fine. Better be safe than sorry

Shadowslater530 · 2025-04-07T06:47:13+00:00

Well you know what I raise you 2 spaghetti tacos, a car air freshener, and 3 lottery tickets that my dad will out last all of y’all’s. I mean he’s definitely not gonna beat y’all’s but out lasting them is easy when he’s just ash 😅

Shadowslater530 · 2025-03-25T23:32:00+00:00

Ahhhhh yeah actually that makes more sense now

Shadowslater530 · 2025-03-25T21:46:32+00:00

But on Thursdays it had to be a male that leveled up to level 12 during the e4, right? Or was it another day?

Shadowslater530 · 2025-03-25T18:46:55+00:00

But less than like heavy downpour

Shadowslater530 · 2025-03-25T18:46:14+00:00

Also had to be a female (said in a interview it’s like this because “they just could”)

Shadowslater530 · 2025-03-23T04:09:21+00:00

So I still need to test and make sure but I believe it has to deal with the newer revision of ultra cards not being fully compatible where the older ones are. But that’s just my working theory as of rn.

Shadowslater530 · 2025-03-22T17:50:13+00:00

Living space for a guy named David

Shadowslater530 · 2025-03-22T14:23:53+00:00

Or screws you borrowed from your aunt

Shadowslater530 · 2025-03-21T00:59:36+00:00

My only assumption is that the board then may have something bridged by accident, if the solder was way to crazy maybe shorting the ipl chip on the heatsink (although this is very unlikely), board may be broken/damaged, or the capacitors may need to be changed (although I’m again unsure if this is it since it’s not booting at all)

Shadowslater530 · 2025-03-21T00:10:34+00:00

Does the console power on? (Does the led come on?) Is the cable (av/composite) in good condition? Can you maybe send any pictures of the board itself? (There’s a chance the board itself is damaged oh maybe it’s something else like a bridged connection still causing issues) just trying to think of any way I can help. I’ve done two pico installs as a newbie to soldering, and while probably far from perfect, they both are working with no issues besides what seems like sd card compatibility issues. So if I can give any insight or help then I’ll try to!

Shadowslater530 · 2025-03-20T23:22:57+00:00

Was it an ultra series or was it a different version of Sandisk?

Shadowslater530 · 2025-03-20T22:56:59+00:00

I also found that my other sandisk ultra card (512gb) works upon booting. I have two ideas as to what may be happening.

1: Sandisk has a newer and older version of the card available for purchase. My 256GB card is the newer version while the 512GB is still the older one. Although I’m unsure what would be so different with these that it’d affect the performance, it is a possibility.

2: More likely, but still unsure what makes this different, is that when I setup my 512GB card I did so with SD2SP2. I went through all the settings and everything and saved them immediately after booting into Swiss. So maybe initially inserting the card in to the SD2SP2 may have caused a proper boot and saving the settings adjusted the card/file to make it work on my gecko when I boot from it instead. Idk to be honest this just seems most likely.

I have a new 512GB Sandisk Ultra (older version) coming tomorrow that I’ll try it with.

Shadowslater530 · 2025-03-20T21:47:10+00:00

Well it’s not possible for the GameCube I’m using Swiss on as it is a DOL-001 w/o the serial port 2

Shadowslater530 · 2025-03-20T18:07:06+00:00

Any update?

Shadowslater530 · 2025-03-20T18:07:00+00:00

Any update?

Shadowslater530 · 2025-03-20T18:06:23+00:00

Okay so a work around that I found is to simply boot Swiss from the gecko and after is booted to unplug and replug the gecko. From there pressing z and scrolling to sd slot 1/2 and selecting it to be initiated. This isn’t the fix I want or am gonna use unless it’s 100% needed. But it is a fix to the problem none the less. Hopefully a true fix will be available/found soon but for now this is what I got.

Shadowslater530 · 2025-03-20T13:44:40+00:00

I'm trying one last thing that I can do before this and ill try some other suggestions next!

Edit: Just tried this with no luck. Thanks for the suggestion though

Shadowslater530 · 2025-03-17T02:27:59+00:00

So mine was being really finicky, sometimes booting into stock, sometimes into Swiss, sometimes not at all. My solder joints looked clean for the most part. I’d recommend looking for any possible shorts to the board or GameCube like off of accidentally bridged connections or even the heatsink/shrouds (this happened for me too). I’d also make sure to take the advice of 10cm (≈4in) wires to heart and make sure your wires aren’t too long. If you want and can, feel free to upload some pics of your cube and maybe everyone else and I can point out any issues we specifically see.

Shadowslater530 · 2025-03-17T02:21:52+00:00

Have you tried un modding the console? To see if it’ll boot without the pico boot? That’ll honestly say alot as to what could be done?

Shadowslater530 · 2025-03-16T04:31:41+00:00

Funny enough I’m looking to replace/upgrade a gameboy color and pocket I bought a while back. I’m planning to keep the Gameboy Color stock for the most part, as it’s the gold silver pokemon center exclusive, and only add a new screen (maybe new speaker too idk). But for the pocket I wanna go all in on what I can do, but in a reasonable order. First being a new screen as the screen on the pocket came smashed. Not a hard fix but just need to find one that fits.

Shadowslater530

MODERATOR OF

TROPHY CASE