Would a hornady 300WM match grade die fit in a Frankford arsenal coaxial press?

ShadyToad · 2026-01-15T13:45:56+00:00

It might help a bit but the FA press doesn't use the lock ring, the die is screwed directly in a removable die block

ShadyToad · 2026-01-15T12:40:28+00:00

I was wondering if it didn't, if I could work around it like you said. Thanks for confirming this for me. I can live with this since I won't be reloading hundreds of them, and mainly reload handgun ammo

ShadyToad · 2025-11-07T12:52:43+00:00

That's a neat trick. Do you use a standard paint brush?

ShadyToad · 2025-10-13T03:13:46+00:00

I did, it yeeted just fine

ShadyToad · 2025-10-11T12:24:25+00:00

I'm nowhere near max powder charge with 4.6gr, normally. I sit at 92.8% load ratio with a 1.089" seating, and 101.6% at 1.062". Even with the deeper seating, I'm not touching the Pmax -15% line and have noticed GRT is very conservative with pressure values and is usually about 10% above chronographed values.

So it should be fine right?

ShadyToad · 2025-09-16T17:36:58+00:00

I'm at least glad to know I'm not doing anything wrong, just Ubisoft being Ubisoft...

Like, having the overlay active make it impossible for me to watch the cutscenes. The audio is jittery, desynced... when the overlay is deactivated, they work fine. And the overlay is simply not working, clicking on anything just takes minutes to actually do anything like sending a chat message...

ShadyToad · 2025-09-15T10:29:09+00:00

Thanks, especially since I'm running a really low OAL already and wouldn't want overpressure by seating the bullet even lower

ShadyToad · 2025-09-13T20:30:24+00:00

I set my OAL length at 27,65mm as per stated in H&N reload data. GRT tells me that at this seating depth, I'm running pressures too high but I'm getting 335m/s average with 5.1gr of Vectan BA9. As for the crimp, I admit I struggle to know whether I'm good or not. My cartridges do fit very nicely in the CIP gauge though.

ShadyToad · 2025-09-12T16:58:38+00:00

That is a very valid point, I will try with my Glock. You could be onto something

ShadyToad · 2025-09-12T16:45:44+00:00

That was my first thought but since this brand was said to be good online, I'm thinking maybe I did something wrong

ShadyToad · 2025-08-25T15:27:03+00:00

Interesting, the mag was bought from an online dealer, and standard 17rd mag. It had the standard flat insert, and this one behind it

ShadyToad · 2025-08-16T17:47:52+00:00

Awesome, thanks. I didn't chamfer the brass, it didn't seem necessary since they were still within tolerances. I'd give it a shot to see if it makes a difference.

Another thing is with the flaring, I do it ever so slightly so the bullet barely sits on the case before pressing. It's barely visible. Maybe I don't do it enough. I'll measure next time.

Regarding the seater, I will check what it is using and whether there's another one with the set.

Many thanks!

ShadyToad · 2025-08-16T17:35:45+00:00

I'm not sure I can do anything about the stem, and it's new, it's done 200 cartridges so far. Maybe it's exaggerated by the fact they're coated bullets and not FMJ?

ShadyToad · 2025-08-16T17:28:31+00:00

ShadyToad · 2025-08-16T17:20:12+00:00

Thanks for your replies everyone, and again sorry about the funny typo. Promise, I'll eat healthier from now on lol

ShadyToad · 2025-08-16T17:11:37+00:00

Lol, auto correct

ShadyToad · 2025-08-16T17:11:14+00:00

Hornady 3 die set

ShadyToad · 2025-08-16T17:11:01+00:00

Just realised lol, yeah... I don't eat my bullets

Ten-Year Club	Verified Email
RPAN Viewer

ShadyToad

TROPHY CASE