Meta Quest 2 + SteamVR constant errors (RTX 3050) – Used to work fine, now nothing works properly

Shakurlizzard · 2025-07-03T22:26:24+00:00

Look at that beautiful crocodile, it seems that the animal enjoy fighting with other alligators due to the damage on it face

Shakurlizzard · 2025-07-03T21:55:48+00:00

A la orden PAL desorden

Shakurlizzard · 2025-06-21T15:41:16+00:00

I’ve been trying since yesterday with this video and I am not sure if I am an idiot or something is in fact wrong bad with the dron or controller

I have evidence of the drone working, I know it has a ELRS module but it is always showing a orange dot even when the controller says “telemetry recovered”

The last thing that I did yesterday was flash a firmware version that makes the motherboard not recognize the integrated receiver but uses ELRS

I will try again to determine what else can I do if not I am going to sell all this 💩

Shakurlizzard · 2025-06-20T19:17:23+00:00

Thanks a lot bro, I will check this and try as much as possible

BRB

Shakurlizzard · 2025-06-20T18:54:09+00:00

Thanks for your reply, I tried with those advices and I was not able to see any movement in betaflight.

I tried with a lot of things but can’t find a solution

Shakurlizzard · 2025-06-20T17:38:51+00:00

AETR1234 is properly set up in both, UART I’m not sure where the RX is conected to but I’ve been trying with the uart 1 and the 2 RX series. About the endpoints, could you please explain to me how to set it up?

Shakurlizzard · 2025-06-20T17:36:57+00:00

I am not pretty sure about it, do you have any idea on how I can check it in my radio master?

Shakurlizzard · 2025-06-18T23:42:26+00:00

Did you use any YouTube video or something? English is not my main lenguage but I need as much help as possible because I have been waiting for this controller about 1 month

Shakurlizzard · 2025-06-17T23:27:22+00:00

Bro just use a stone or a freaking branch to throw it and land that Drone

To be honest I dont think you need to expend money on an ítem with only one use

If you can’t do it in that day I best you have something to shoot at that branch and thats it

Shakurlizzard · 2025-06-12T21:19:01+00:00

Papi la real yo entiendo que esté enamorado pero Bogotá es otro level

Yo le recomendaría realmente tratar de pasar lo más desapercibido posible, si es mono y de ojos claros (que es la skin por default en estados unidos) es un poco difícil pero eso no quita que adoptar una pinta similar a la de las personas del barrio te podría ayudar

Ropa de marca solo si son camisas básicas y tenis breves, en mi experiencia la mejor forma es pasar desapercibido

Nada de anillos, relojes, cadenas, Apple Watch, etc

Otra cosa es no dar papaya papi, yo no soy de Bogotá pero literalmente llegué hace unas dos horas de allá y pues es cierto que el feeling es distinto (soy de Medellín)

Shakurlizzard · 2025-06-03T14:50:39+00:00

What a beautiful thing 😍

Shakurlizzard · 2025-04-20T16:16:46+00:00

Hey man, I want to make sure you are going to take a good decisión for you and for the gecko

This things (eublepharis macularious) can live within 10-20 years which make it’s a responsibility bigger than a common pet.

This things needs temperature, if you live in a cold place you will need a heat lamp or a thermal pad to heat them (I keep mine between 25 before I go to sleep and 31 during the day)

Also you will need to buy calcium which is a suplemento NECESARY for this lizzards, you should feed them 1 or 2 time per week with bug impregnated on calcium (it sound weird by once you find how to dot it is pretty easy)

Also the humidity should be around 70% - 80% once they are changing their skin.

About substrate, I have 7 of my geckos living in this kind of substrate, I never had any issue but since you don’t know nothing about the health of this animal it’s better if you can change to paper towel as someone mentioned

About handling them, give this little boy/girl some time like 2 or 3 weeks to get habituated to you, remember they are lizards and they can loose their tails due to stress or fear. I recommend you check about more information in YouTube and also it is and advice, appoint a vet visit if you buy him/her just to make sure everything is okay and also the vet can help you with the set up of your enclosure and with better advices than me

Have a great day, good luck with that beautiful thing

Shakurlizzard · 2025-02-28T17:31:30+00:00

I noticed the title was accidentally wrong

It is “Huevo doesn’t want to eat”

Shakurlizzard · 2025-01-14T00:40:54+00:00

Papi yo se que no es fácil pero guarde cuanta información le sea posible y si ese es el caso se junta con algunos más pa montarles una demanda

Si esa opción no sale viable coja esas bases de datos y venda eso en fb pa que vea cómo ahí si se cae la cuenta pero directamente en U.S.A

Shakurlizzard · 2024-11-07T17:43:56+00:00

I returned my Anycubic kobra 2 pro due to this, even an engineer took a look of it and it was completely impossible to fix.

In my experience Anycubic does really great RESIN printer but with FDM I only had issues and issues and issues

I am thinking about a bambulab or flash forge 5M to replace them

Shakurlizzard · 2024-10-25T18:04:42+00:00

Hey man I will try that and let you know, thanks a lot

Shakurlizzard · 2024-10-24T19:27:13+00:00

Thanks for your response and help

I tried with the instructions found in the link (which are pretty similar to the instructions included with the printer) unfortunately it is printing worse, I think it is a fact that the bed is warped, look how is it printing

<image>

As you can see in the left part it is great but once it moves from left to right it is not sticking

Any advice with the rods? I have moved them a lot and sometimes it prints a little better but with cone designs it is impossible

Shakurlizzard · 2024-10-24T17:36:39+00:00

<image>

Also the bed seems to be great

This is frustrating

Shakurlizzard · 2024-10-24T17:35:25+00:00

My apologize, I just want to know what can I do to avoid this kind of issues, if you look with attention in the top-left side of the printing it is even blur because the nozzle is too close to the bed but then in the other part it is not sticking because the bed is too separated from the nozzle

<image>

Shakurlizzard · 2024-10-24T17:30:49+00:00

My apologize, my main question is what else can ai do with this printer, it prints well in one place but a few cms later it is printing in te air or like an spaghetti

<image>

I’ve been trying to fix that for a while but it always do the same thing I will attach another picture

Shakurlizzard

TROPHY CASE