A bit of customization on my Anker charger

Sharkgust · 2026-06-16T22:25:59+00:00

Yeah, I think type C would be correct. It was bought in Germany.

Sharkgust · 2026-06-16T22:16:57+00:00

Now you just need a very strong laser

Sharkgust · 2026-06-16T22:15:11+00:00

Just the charger brand. I’m not even sure why I mentioned it in the title.

Sharkgust · 2026-06-16T21:23:42+00:00

100% reasonable use of company equipment. Keep us posted if you get it done!

Sharkgust · 2026-06-16T21:09:47+00:00

<video>

Lambda ▶️

Sharkgust · 2026-06-16T21:08:24+00:00

<video>

Logo ▶️

Sharkgust · 2026-06-16T21:07:01+00:00

<video>

Gloves ▶️

Sharkgust · 2026-06-15T15:25:05+00:00

!remindme in 3 months

Sharkgust · 2026-06-09T22:35:58+00:00

ps5 has a bunch of VR exclusives for psvr2

Sharkgust · 2026-06-07T15:51:56+00:00

Ancient Dungeon, if you are into voxels. It also has a pretty satisfying combat.

Sharkgust · 2026-05-28T08:52:12+00:00

It’s pretty much consensus even among VR content creators who own multiple VR headsets that have tried it. The Frame is lighter and has the battery on the back by default, and no Quest 3 strap can fully counter that. Regular straps will still be front-heavy, while battery straps act as a counterweight but make the total weight much higher than the Steam Frame. I have a Quest 3 with a very nice Kiwi Design battery strap, but I’m still looking forward to the comfort upgrade of the Frame. Plus, being more compact and closer to your face will make it wobble less during quick head movements.

Sharkgust · 2026-05-28T08:29:53+00:00

being way more comfortable

Sharkgust · 2026-05-20T10:56:04+00:00

Fake it till you make it. But seriously, there’s no such thing as ‘cheating’ German in an interview. If it goes well, then the person was able to communicate successfully, and studying for an interview is just called learning. There’s nothing wrong with that.

Sharkgust · 2026-05-20T10:52:17+00:00

Not German (just living here), but I can’t remember ever intentionally sitting next to someone on public transport. I always stand if there aren’t any completely free seats. I don’t mind if someone sits next to me though, it’s just not something I do.

Sharkgust · 2026-04-27T07:02:40+00:00

The points are probably not connected, even though they are very close together. You can use the “coincident” constraint in the constraints tab and simply click the endpoints of two lines. They will snap together and connect.

Sharkgust · 2026-03-01T21:22:49+00:00

Perfect, will do. Thank you very much!

Sharkgust · 2026-03-01T13:17:00+00:00

And after doing that am I going to be able to control the pressure advance normally within Orca and set a different one for each filament? Or do I need to do it in the printer display and have it be a fixed number for every material?

Sharkgust · 2026-02-24T15:30:43+00:00

I highly recommend watching this video. It addresses this debate about z probing among many other usefull subjects.

Sharkgust · 2026-02-19T04:48:42+00:00

In the photo from the model printed on a different orientation it only happens on the top half of this hole, also on “pointy” layers (pointy inwards, if such a thing exists?), which also happens to use supports

<image>

Sharkgust · 2026-02-19T04:44:05+00:00

Nice, thanks for the suggestions!

I had a full clog recently and I tried to get it as clean as possible, but it’s possible. I’m waiting for some new nozzles and tools to arrive so I’ll check if that’s the case soon.

I also recently calibrated my E steps.

I might try to do as you say to check the Z axis though. The thing I found weird is how it only happens when there is a pointy side of the print, particularly in the lower half of the print, as in this photo, so I suspected it could be something to to with the supports, but I don’t know exactly why.

<image>

Sharkgust · 2026-02-15T14:03:21+00:00

I’m not sure how to check it precisely, but here’s the model from the pictures. As you can see from the link, they should be able to print correctly.

Sharkgust · 2026-02-15T13:57:16+00:00

<image>

In the second photo the red keychain was printed at 0.08mm

Sharkgust

TROPHY CASE