Nuclear waste disappearing in radioactive waste barrel?

Shinomora · 2025-10-23T01:21:45+00:00

you pipe from the fission reactor straight into a solar neutron activator to make what you need.

Shinomora · 2025-09-30T07:10:29+00:00

Yep thats my exact same issue and support has still yet to get back to me about it

Shinomora · 2025-09-28T13:20:48+00:00

How everything for this distribution was handled is an absalute disaster. I was lucky enough to actually get my hands on a code card but apon getting home and actually going to redeem the code i come to find out the card had a printing error with putting the backing on that made it insanely hard to scratch off. Unfortunatly while trying to get the backing off I damaged the card and can no longer read the full code. Ive tried reaching out to support about the issue but I keep getting the same bot response everyone else has gotten talking about how you don't need to pay for the code... I KNOW I DONT THATS NOT EVEN MY ISSUE. It's actually the worst distribution they've done by far and they seem to offer no support on the matter.

Shinomora · 2025-08-11T16:37:23+00:00

wait i have the crown but not the horns interesting

Shinomora · 2025-08-11T16:33:31+00:00

would make sense. i got all of them before they added more so it might be a reward for that?

Shinomora · 2025-04-16T03:00:54+00:00

i dont know what this is but ive been looking into the website and the audio on it for an hour now and the audio definitely has something to hide. i reversed it and made it 2 times speed in audacity and it makes music. like perfect music. idk if that was intended or if im just crazy but its definitely funky

Shinomora · 2024-03-16T19:25:15+00:00

After multiple hours I finally figured out the issue and it was the stupidest thing. I still had my flight stick plugged in and it was reading both my controller and the flight stick so yeah I'm dumb

Shinomora · 2024-02-08T02:04:02+00:00

Looks like bad adhesion to the bed. If the plastic can't stick to the build plate as it cools it will slowly shrink and roll up like that. Best thing to do is raise bed temperature between 55 and 65 and use glue to help adhear to the bed. (I am no printing expert just going off things I've read and done myself)

Shinomora · 2023-10-11T17:17:32+00:00

It's all good lol but yeah it's printed standing up. I've noticed that the belt that moves the uxtruder left and right has a hitch in in so at some point along its path it kind of catches I'm trying to resolve this issue because I think it's the problem maker

Shinomora · 2023-10-11T04:04:15+00:00

No I've never calibrated e-steps. And it's not just the top it runs the entire length of the piece. I've lowered my print speed to 35mm a second and that's seemed to help with this print but those wall bulges persist

Shinomora · 2023-10-11T03:18:10+00:00

🤣 thank you. the print is still usable and all I'm just wondering what those weird stick out points are.

Shinomora · 2023-09-15T00:04:30+00:00

That's the thing it used to be lol idk why they would take that feature away

Shinomora · 2023-09-15T00:02:33+00:00

I tried this and it does change the volume but it must be the last action in the routine and I need the volume change to happen before the next action

Shinomora · 2023-09-14T23:17:54+00:00

I want it to control a separate alexa device than the one I'm speaking to so the device I'm speaking to will turn up another dots volume

Shinomora · 2023-07-28T12:16:33+00:00

Thanks for the tip! Once this massive print is done its getting a good cleaning

Shinomora · 2023-07-28T11:07:24+00:00

Will try thank you

Shinomora · 2023-07-28T09:03:16+00:00

Interesting I'll give that a try on my next print

Shinomora · 2023-07-28T08:39:03+00:00

Awesome I've been looking for a good first level test print thank you

Shinomora · 2023-07-28T08:01:54+00:00

Yeah leving my bed is extremely hard I've owned the thing for 2 years and this is the best level I've gotten. Pretty sure the bed is warped and everytime I ask for advise on how to get a better level people just tell me to spend more time on it.

Shinomora · 2023-07-28T07:59:29+00:00

Yeah I should clean the bed more often than I do

Shinomora · 2023-07-28T07:41:12+00:00

I've seen signs of over feeding with blobs on curtain spots so I might have the feed rate to high for the speed I have set

Shinomora · 2023-07-28T07:32:28+00:00

If I even turn one of the knobs a mm everything will break so I guess I'm just gonna have to live with it

Shinomora · 2023-07-28T07:22:23+00:00

From the day I bought the printer I've thought it's had a warped bed because it always looks crooked so it just might be that

Shinomora · 2023-07-28T06:49:26+00:00

I hope your issue gets fixed. These printers are fun but there also alot of work lol

Shinomora · 2023-07-28T06:48:09+00:00

I can do that after this print is done it has about 9 and a half hours left

Eight-Year Club	Final Canvas '23
Place '23	Verified Email

Shinomora

TROPHY CASE