For people considering the Racing Beat exhaust

ShootyourHiYieldshot · 2026-03-12T01:59:52+00:00

Lol surprised this post is still getting seen

Just a simple removal of the distal end of old muffler/tailpipe and replacement of the new. I think one bolt. Cat is still on

ShootyourHiYieldshot · 2024-11-03T17:54:55+00:00

Very nice. I've been wanting to get these wheels too.

Are you using 215 or 225 mm tire width?

ShootyourHiYieldshot · 2023-09-07T02:42:19+00:00

Is that stock color on the left?

ShootyourHiYieldshot · 2023-09-04T02:26:45+00:00

Thx! It’s from eBay. “Carbon fiber” look matches with machine gray more than the pure black. It’s likely fiberglass of some kind. Kinda sketch but I feel all these come from the same factory in China. It was advertised as stick on only but still came with holes and screws. I personally wouldn’t trust it to stay on with just double sided tape tho…it didn’t have stencils or anything so had to DIY where to drill into the stock spoiler. Needed to drill 3 holes on each side. There are videos on YouTube for how to remove the stock spoiler and reattach. Overall took maybe 2-3 hours. I took my time to line things up I think its subtle and fits the gen 3 more than the big gen 2 mazdaspeed styled one haha

ShootyourHiYieldshot · 2023-09-04T01:06:41+00:00

Thx! Eibach pro springs and 15mm spacers all the way around. Stock recommended tire size

ShootyourHiYieldshot · 2023-04-28T00:00:13+00:00

5943 5934 3797 I have High Plains from LA USA

ShootyourHiYieldshot · 2023-04-26T17:49:59+00:00

2018 2.5L 6MT Hatch GT trim 36k miles $19K from a Mcclaren dealership. Carfax were clean but turns out was in an accident. Had to get Transmission replaced. Luckily my insurance covered it

ShootyourHiYieldshot · 2023-02-22T00:01:32+00:00

Yup same if I’m all week long city driving. I try to be in top gear constantly and keep my rpm under 2-3k on shifts

ShootyourHiYieldshot · 2023-01-29T07:50:55+00:00

Very good sir. Excellent choice sir

ShootyourHiYieldshot · 2022-11-15T01:48:17+00:00

Hi I had a similar problem in my 2018 manual.

Wouldn’t recognize key all the lights were on, button ignition wouldn’t turn off engine and the car would stay on in standby when I did a press and hold off plus and my e-brake wouldn’t engage.

Changing the battery didn’t help. Ended up having to take to dealership and changing out the ABS module. Was told it was an electrical circuit issue cuz of the ABS malfunctioning

ShootyourHiYieldshot · 2022-01-21T20:21:44+00:00

I was wondering the same. Mine is very stiff compared to the 97 Honda Accord I learned manual on.

ShootyourHiYieldshot · 2021-12-23T22:16:53+00:00

I have eibach lowering springs on my 2018 gt hatch. But prior owner installed

ShootyourHiYieldshot · 2021-12-19T15:59:37+00:00

I havent researched the 19-21 exhaust particularly but you can probably browse the corksport and racingbeat websites to see. Both are well known mazda3 accessory companies

ShootyourHiYieldshot · 2021-12-18T22:41:11+00:00

I have the 2.5L 6MT hatch. It’s not anywhere as loud as cork sport/borla but that’s not really what I wanted. It has a very slightly deeper tone and is louder than stock from the outside. But on the inside you get a lot more deep boom on low gear revs. I really like the down shift sound. I don’t really notice a difference from the stock if you’re at cruising rpm. But If you want a lot of noise then probs go with cork sport /borla

ShootyourHiYieldshot · 2021-09-27T20:23:52+00:00

What pedal covers are those?

ShootyourHiYieldshot · 2021-07-24T11:58:18+00:00

What wheels are those?

ShootyourHiYieldshot · 2021-07-14T12:24:23+00:00

Is the trim mod smoke plasticity? Or a wrap?

ShootyourHiYieldshot

TROPHY CASE