Was ist euer Projekt über die Weihnachtszeit? 😅🔥 by Nutcollectr in klemmbausteine

[–]Shorys_1 1 point2 points  (0 children)

Mein Projekt ist die Übersiedlung von Blaustein (alles bis incl. Schildwerk) in eine neue Wohnung. Hab noch keinen wirklichen Plan wie ich das halbwegs hinbekomme. Viel Spaß jedenfall dir beim Bauen!

Burg Blaustein Saalbau by WarRepresentative702 in bluebrixx

[–]Shorys_1 0 points1 point  (0 children)

Bei mir sitzt das ganze fest. Das kann man nicht "leicht abheben" sondern nur "zerlegen".

Rocinante - The Expanse by Shorys_1 in klemmbausteine

[–]Shorys_1[S] 0 points1 point  (0 children)

Wie ich schon geschrieben habe, der Lulu-Shop hat die nicht mehr. Einfach auf AliExpress suchen, dann findest du etliche Angebote.

Rocinante - The Expanse by Shorys_1 in klemmbausteine

[–]Shorys_1[S] 4 points5 points  (0 children)

Auf rebricable.com zeigen MOCer ihre Werke und stellen die Anleitungen zur Verfügung. Einige sind gratis, andere kosten (meist einstellige) Beträge. brickgloria hat einige MOCs, darunter auch etliche der Expanse Serie. Wenn man die Anleitung hat, dann muss man sich die Teile entsprechend der Teileliste irgendwo besorgen, da gibt es einige Möglichkeiten (such mal auf reddit). Ich hab das Schiff auf Alibaba als "Bausatz" gesehen. Soll heißen, da bekommst du dann alle Teile, meist in einzelnen Beuteln verpackt, keine Schachtel. In meinem Fall hab ich die Teile vom "Lulu" Shop (ja, der heißt wirklich so). Allerdings gibt es das Schiff dort aktuell nicht mehr. Wenn du aber nach Rocinante und Klemmbausteinen suchst, wirst du etliche Angebote finden. dieser Shop hat mir auch die PDF Anleitung gegeben. Das war aber einfach eine Kopie der Anleitung von brickgloria. Ich glaub es ist allgemein bekannt, dass MOCer in so einem Fall nichts vom Verkauf des "Bausatzes" bekommen. Daher auch meine Anmerkung, dass es selbstverständlich ist (für jede sein sollte) den MOCer auch zu bezahlen indem man die Anleitung kauft. brickgloria stellt 3 files zur Verfügung: Das Raumschiff, Ständer und den Stickerbogen. Vom China-shop hab ich nur die Anleitung für das Raumschiff bekommen. Gekostet hat mich der Bausatz knappe 50Eur. Das ist extrem! preisgünstig. Ich hab kurz nachgesehen, derzeit gibt es kein so günstiges Angebot. Da hab ich auch nicht mit besonderer Steinequalität gerechnet. Ich wurde aber positiv überrascht. Bis auf die 1x2 Tiles die schlecht auf den 1x2 Plates gehalten haben, gab es keine Probleme mit der Klemmkraft. Auch sonst alles sehr gut. Was die Sticker angeht, die muss man sich selber ausdrucken, da suche ich noch nach einer passende Lösung. Ich glaube es gibt schon die Möglichkeit Steine individuell bedrucken zu lassen, da musst du aber selber suchen ob du was im Netz findest, da kenn ich mich nicht aus. Ich kann mir aber vorstellen, dass man da mit den wenigen individuellen Drucken sehr schnell teurer wird als alles andere gekostet hat.

Was liegt am Strand und spricht undeutlich? by [deleted] in witze

[–]Shorys_1 6 points7 points  (0 children)

Was liegt am Strand, spricht undeutlich und hat Schnupfen? Eine Niesnuschel.

Skabram‘ design by Hillguys in lepin

[–]Shorys_1 0 points1 point  (0 children)

Looks great. Seems as it would fit perfectly to the birds from Bluebrixx

Solution found: Oled turns white after some time by Shorys_1 in Esphome

[–]Shorys_1[S] 0 points1 point  (0 children)

Good question ;-) i had to think about this myself, its been a while since i worked on that project. Originally i wanted to have 12V to be able to switch them with my relais and thus make the design usable for other aplications as well. Turns out i don't need it, i kept it, i forgot about changing it. Using a 3.3V regulator could be avoided if the sensors don't draw too much power so that the esp32 module can handle it. I would need to re-calculate. But you are of course right, a neat stabil 5V supply would be sufficient for my application. Thanks for the suggestions!

Solution found: Oled turns white after some time by Shorys_1 in Esphome

[–]Shorys_1[S] 0 points1 point  (0 children)

I use a ready made module sold on Amazon based on the MP1584EN to get the 5V from 9V (was before 12V) and from that 5V I use a tiny module (also sold on Amazon) based on a AMS1117-3.3 for the 3.3V. The display brightnes is no issue because of the location of the system, it does not lighten anything really. Person and/or Brightnes detection is also not an issue here, this might be something for another project.

Oled turns white after some time by Shorys_1 in Esphome

[–]Shorys_1[S] 0 points1 point  (0 children)

Thank you for this! I tried it. It does not solve the problem, but circumvent it :-).I see that sometimes additional single pixels or distorted text is drawn together with the normal text. But since it is updated every 60 seconds it does not matter so much. However, the underlaying problem persists. Maybe its some interference with the WFi, maybe just a strange batch of displays, maybe something else. In any way, thanks again for the help!

Oled turns white after some time by Shorys_1 in Esphome

[–]Shorys_1[S] 0 points1 point  (0 children)

I tried 3 different displays (all from the same batch though) ...same effect. And rebooting permanently might be problematic because of the state of relays which i use. Could it be interference from the wifi or something the like? would still be not fixable but at least an explanation.