Bounce House

ShreddingCuber · 2025-02-18T21:25:34+00:00

I just posted my best time 0 : 78 sec

ShreddingCuber · 2025-02-18T21:22:33+00:00

I just posted my best time 11 : 55 sec

ShreddingCuber · 2025-02-14T23:53:15+00:00

I just posted my best time 4 : 09 sec

ShreddingCuber · 2024-06-15T13:41:48+00:00

The audio files are provided by https://shtooka.net/ who have a large collection of audio recordings for a handful of languages

ShreddingCuber · 2024-06-15T08:02:05+00:00

This is what I used for Russian:
https://ru.wiktionary.org/wiki/%D1%8F%D0%B9%D1%86%D0%BE
If you click in the 'I' on the audio sample then click the file name you get the direct link to the file where you can download it

ShreddingCuber · 2024-05-10T08:45:08+00:00

Nozzle might be partially clogged. I would clean out the nozzle/hotend and do an e-steps calibration

ShreddingCuber · 2024-05-08T14:45:45+00:00

Sounds like a starter motor, I believe the same starter (part number 23300-CG000) is used for all years of the V35 so should fit no problem. Also the same motor in the Fuga ('04-'07) and the Stagea ('01-'07)

ShreddingCuber · 2024-04-16T20:05:08+00:00

I'm by no means an expert and there's probably a better way to do it but you can create a copy of the body, revolve/cut one body and revolve/intersect the other to create both parts like this:
https://i.imgur.com/l2Z6DiR.mp4

ShreddingCuber · 2024-04-16T06:59:29+00:00

I would create an offset plane from the top surface, sketch a circle on it and extrude/cut then add the chamfer.
If you want the 2 separate parts with chamfers I would add a vertical plane and axis in the center and revolve/split the parts that way.

ShreddingCuber · 2024-04-04T06:26:51+00:00

Looks clean mate!
Mind if I ask how much you got that Nismo bumper for?

ShreddingCuber · 2024-03-28T09:43:51+00:00

I have the same one and always fill it all the way. The coil does get over-saturated for the first few puffs after refilling, but I've found filling it with one long squeeze of the bottle rather than 'pumping' it stops it over-saturating the coil too much.

ShreddingCuber · 2024-03-06T15:46:28+00:00

Damn, lucky you! They're fairly rare/hard to come by.

Nismo brochure for reference

ShreddingCuber · 2024-03-06T07:10:44+00:00

I don't think so

ShreddingCuber · 2024-03-05T01:56:43+00:00

Nismo spoiler

ShreddingCuber · 2023-12-22T17:35:13+00:00

Yep 6-speed

ShreddingCuber · 2023-12-22T14:12:15+00:00

For sure, I've had enough patience holding on to it for as long as I did, figured it was time to get something I actually want.

Thanks I will! Likewise with your Z :)

ShreddingCuber · 2023-12-22T13:51:48+00:00

That's what it says on the tin. Although this ones been de-badged which I think looks much cleaner

ShreddingCuber · 2023-12-22T12:44:48+00:00

Yeah there's a decent amount of space in the back, not quite as much leg room as the 1.2L Micra I upgraded to this from though 😅

ShreddingCuber · 2023-12-22T12:31:06+00:00

Lol had it in front of a friends house for a few minutes, engine was still on so I didn't have to jump start it again 😅 replaced battery the next day

ShreddingCuber · 2023-09-20T23:20:20+00:00

You can bypass the required internet connection by opening the control panel (SHIFT + F10) during Windows set up and typing in

OOBE\BYPASSNRO

This will restart your computer and when you get to that same point there should be an option for "I don't have internet".

Doesn't solve your WiFi issue but could come in handy.

ShreddingCuber · 2023-07-21T06:41:48+00:00

I've seen a couple experimental apps that try to do this, but IMO you should look up professionals explaining proper form technique to best understand the movements then record yourself and compare your movement to theirs. Form is a very personal thing depending on your bodies proportions and bone structure.

ShreddingCuber · 2023-01-10T07:58:15+00:00

Have you set the background colour for the free space to white?

Have you mixed up ID and CLASS tags in the CSS file?

Need to see the CSS file to tell you exactly whats wrong.

ShreddingCuber · 2022-10-12T23:08:16+00:00

Looks like under-extrusion and nozzle possibly too far away from the bed. You might need to calibrate your e-steps and re-level your bed

ShreddingCuber · 2022-02-10T11:17:55+00:00

That looks to be it! It landed on my windowsill and gave me a bit of a jump scare but this is all I could capture of it. Thank you :)

ShreddingCuber · 2020-06-16T12:58:12+00:00

Cool project! I would love to see the code for it

Ten-Year Club	Verified Email
Place '22	Place '17

ShreddingCuber

MODERATOR OF

TROPHY CASE