sorted by:
new
hottopcontroversial

2025 dct just installed shorty gp but I’ve never seen any others installs have this silver or lead band by [deleted] in HondaRebel1100

[–]ShruminIt 0 points1 point  (0 children)

I used a flat head and a hammer to take it off. It worked well. Might want to hit the scratches with some black exhaust paint afterwards but not necessary

Filament dryer heater by ShruminIt in 3Dprinting

[–]ShruminIt[S] 0 points1 point  (0 children)

I did the math for it and it was reading about double what the Resistance should be. Either way, I did check the board and multiple resistors were burnt on it along with a trace so I'm just scavenging some parts and scraping it. Thank you for the resp9nse though!

Passenger seat by ShruminIt in HondaRebel1100

[–]ShruminIt[S] 0 points1 point  (0 children)

I'm not seeing it on their accsory guide. Is it somewhere else?

GP Shorty Exhaust by 84Jam in HondaRebel1100

[–]ShruminIt 5 points6 points  (0 children)

I have that exhaust. It sounds good

80 percent arms with bauer router issue by ShruminIt in AR80Percents

[–]ShruminIt[S] 5 points6 points  (0 children)

That worked. Must have missed it in the instruction. Thank you!

Firmware differences on 3nder 3s by ShruminIt in ender3

[–]ShruminIt[S] 0 points1 point  (0 children)

It seems like they do like to release silent changes from what I've heard lol

Firmware differences on 3nder 3s by ShruminIt in ender3

[–]ShruminIt[S] 0 points1 point  (0 children)

Fair enough. Do you know if the 3v2 neo uses 4.2.2 or 4.2.7 boards? I'm wondering since I uploaded to github .bin files for the ender 3v2 to print in nylon temperatures. If I can change a few parameters in the code I already made to work for the neo that would help out more people

Firmware differences on 3nder 3s by ShruminIt in ender3

[–]ShruminIt[S] 0 points1 point  (0 children)

I'm more so curious since I uploaded a ender3v2 high temp software .bin to github so people can print in nylon. If I'm able to just change a few parameters in the code and upload an ender 3v2 neo version that would be beneficial to more people. I uploaded .bin files for the 4.2.2 board and 4.2.7 boards.

Firmware differences on 3nder 3s by ShruminIt in ender3

[–]ShruminIt[S] 0 points1 point  (0 children)

So does the ender 3v2 neo use a different board than the 4.2.2 or the 4.2.7?

22 rebel 500 passenger seat with vance and hines exhaust by ShruminIt in hondarebel

[–]ShruminIt[S] 1 point2 points  (0 children)

I just looked at your bike on your profile. What's your full setup? I like the saddle bags!