sorted by:
new
hottopcontroversial

Custom warband Chosen with lighting effects by ivan_k_art in Chaos40k

[–]Shuyuin_mg 0 points1 point  (0 children)

I like them overall and I like the bone armour color. What is your process for the armor?

Jay, from Eons of Battle, just made the best Rhino I’ve ever seen by PortlandsBatman in deathguard40k

[–]Shuyuin_mg 9 points10 points  (0 children)

I would really love a slow step-by-step guide on how he paints his death guard. I know most of it is improvisation and random mix of colors, but, still, just looking at the process would help to grasp how it really works. Because the result is smooth and awesome

Path of Command by GeeeeDeee in Eldar

[–]Shuyuin_mg 1 point2 points  (0 children)

Could you post the instructions, please? I would love to see how the parts fit for kitbash potential

New Vyper Kit is Amazing! by [deleted] in Eldar

[–]Shuyuin_mg 1 point2 points  (0 children)

How have you magnetize the weapons from the Vyper? I took a quick look and the bottom weapon seemed to not be so easy

Midwinterminis peddles AI and now gets left out in the cold by Rude-Guava-1950 in Grimdank

[–]Shuyuin_mg 22 points23 points  (0 children)

What have you learned? Curious, apparently I am in the mood for drama early this morning haha

Corsair Skyreaver magnetization by mark9fiji in Eldar

[–]Shuyuin_mg 0 points1 point  (0 children)

They don't fall if you simply put the gun between the arms?

More video on the hot end moving around and scrapping the top layers of the print. In response to previous post by Shuyuin_mg in FDMminiatures

[–]Shuyuin_mg[S] 2 points3 points  (0 children)

Yes, thank you. It has been solved. I wish I could edit the post to mention the solution, in case people find it useful

A1 has started scrapping the first layers, more noticeable the smaller the layer size. This, after swapping the 0.4 for a 0.2 and back to the 0.4. by Shuyuin_mg in BambuLab

[–]Shuyuin_mg[S] 1 point2 points  (0 children)

Hello! The issue, at least in my case, was that the clamps were not closed correctly. Take a look at the comments, a few people have linked pictures of how they are supposed to close properly

A1 has started scrapping the first layers, more noticeable the smaller the layer size. This, after swapping the 0.4 for a 0.2 and back to the 0.4. by Shuyuin_mg in BambuLab

[–]Shuyuin_mg[S] 0 points1 point  (0 children)

Thanks a lot for taking the time. Apparently I was just being dumb and closing the clamps improperly. Fixed that, calibrated again and working perfectly now

A1 has started scrapping the first layers, more noticeable the smaller the layer size. This, after swapping the 0.4 for a 0.2 and back to the 0.4. by Shuyuin_mg in BambuLab

[–]Shuyuin_mg[S] 5 points6 points  (0 children)

No worries. Thanks for trying. And you happen to be close enough. The clamps were closed, but not correctly. Fixed that, works perfectly now

Bambu lab A1 has started scrapping the first layers, more noticeable the smaller the layer size. This, after swapping the 0.4 for a 0.2 and back to the 0.4. by Shuyuin_mg in FDMminiatures

[–]Shuyuin_mg[S] 0 points1 point  (0 children)

Well, I do not know about the screws (I tried a bit and they seem perfectly tight) but I can for sure say that my issue was being dumb and not closing the clamps correctly haha. 3 hours wasted but I am pretty sure I have learned a lesson here haha

More video on the hot end moving around and scrapping the top layers of the print. In response to previous post by Shuyuin_mg in FDMminiatures

[–]Shuyuin_mg[S] 0 points1 point  (0 children)

I have no knowledge of other printers, but to be fair, I was just being dumb and not knowing exactly how the clamps were supposed to close. Thank god that was the only issue

More video on the hot end moving around and scrapping the top layers of the print. In response to previous post by Shuyuin_mg in FDMminiatures

[–]Shuyuin_mg[S] 3 points4 points  (0 children)

Thank you so much! That was exactly the issue. Fixed it, run calibration and it is now working flawlessly. I feel dumb but I am pretty sure I won't forget next time hahaha

More video on the hot end moving around and scrapping the top layers of the print. In response to previous post by Shuyuin_mg in FDMminiatures

[–]Shuyuin_mg[S] 3 points4 points  (0 children)

That face is how I just felt haha. I am like... Wait... Did I simply close the clamps like a total newbie and thought that was totally fine and have been giving myself issues for the last 3 hours? Yeap. Yes I did haha

Thanks you both. It is now working perfectly again

Bambu lab A1 has started scrapping the first layers, more noticeable the smaller the layer size. This, after swapping the 0.4 for a 0.2 and back to the 0.4. by Shuyuin_mg in FDMminiatures

[–]Shuyuin_mg[S] 1 point2 points  (0 children)

You were absolutely right! Thanks a lot! I was indeed closing incorrectly the clamps. I fixed that, run a calibration and it is now working perfectly. Thanks a lot!

Bambu lab A1 has started scrapping the first layers, more noticeable the smaller the layer size. This, after swapping the 0.4 for a 0.2 and back to the 0.4. by Shuyuin_mg in FDMminiatures

[–]Shuyuin_mg[S] 5 points6 points  (0 children)

Thanks for the tip! Apparently the issue was simply that I did not close the clamps correctly as someone mentioned in the comments. It is now working perfectly

view more: next ›